Optimization of 3D Printing Process Parameters on Tensile Strength of ABS Filament Material Product using Taguchi Method

Farizi Rachman, Bayu Kurniawan, Mega Yoningtias

2021

Abstract

The world of the manufacturing industry continues to develop from time to time and one of the technologies that support the manufacturing industry in the era of the industrial revolution 4.0 is 3D printing technology. It is necessary to improve the quality of 3D printing products, especially in their mechanical properties, namely tensile strength. Low tensile strength can cause the product to experience mechanical failure such as yielding or fracture, it is necessary to combine the right and optimal process parameters in the 3D printing process. The test specimens were designed using Fusion 360 software according to the ASTM D638-14 type IV standard. The material used is ABS filament. The process parameters used are layer height 0.1 mm, 0.15 mm, 0.2 mm, infill pattern with grid, line, cross pattern and nozzle temperature 230°C, 240°C, 250°C. The Design of Experiment used the Taguchi method in the form of an orthogonal matrix L9(3 4) with three replications. From the experimental results, it is found that the most optimal combination of process parameters is layer height at level 3 with a value of 0.2 mm, infill pattern at level 2 with line pattern and nozzle temperature at level 1 with a value of 230°C.

Paper Citation

in Harvard Style

Rachman F., Kurniawan B. and Yoningtias M. (2021). Optimization of 3D Printing Process Parameters on Tensile Strength of ABS Filament Material Product using Taguchi Method. In Proceedings of the 4th International Conference on Applied Science and Technology on Engineering Science - Volume 1: iCAST-ES, ISBN 978-989-758-615-6, pages 284-290. DOI: 10.5220/0010944200003260

in Bibtex Style

@conference{icast-es21,
author={Farizi Rachman and Bayu Kurniawan and Mega Yoningtias},
title={Optimization of 3D Printing Process Parameters on Tensile Strength of ABS Filament Material Product using Taguchi Method},
booktitle={Proceedings of the 4th International Conference on Applied Science and Technology on Engineering Science - Volume 1: iCAST-ES,},
year={2021},
pages={284-290},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0010944200003260},
isbn={978-989-758-615-6},
}

in EndNote Style

TY - CONF

JO - Proceedings of the 4th International Conference on Applied Science and Technology on Engineering Science - Volume 1: iCAST-ES,
TI - Optimization of 3D Printing Process Parameters on Tensile Strength of ABS Filament Material Product using Taguchi Method
SN - 978-989-758-615-6
AU - Rachman F.
AU - Kurniawan B.
AU - Yoningtias M.
PY - 2021
SP - 284
EP - 290
DO - 10.5220/0010944200003260