ICT BASED ASSET MANAGEMENT FRAMEWORK

Abrar Haider, Andy Koronios

2005

Abstract

Manufacturing and production environment is subjected to radical change. Impetus to this change has been fuelled by intensely competitive liberalised markets; with technological advances promising enhanced services and improved asset infrastructure and plant performance. This emergent re-organisation has a direct influence on economic incentives associated with the design and management of asset equipment and infrastructures, for continuous availability of these assets is crucial to profitability and efficiency of the business. As a consequence, engineering enterprises are faced with new challenges of safeguarding the technical integrity of these assets, and the coordination of support mechanisms required to keep these assets in running condition. At present, there is insufficient understanding of optimised technology exploitation for realisation of these processes; and theory and model development is required to gain understanding that is a prerequisite to influencing and controlling asset operation to the best advantage of the business. This paper aims to make a fundamental contribution to the development and application of ICTs for asset management, by investigating the interrelations between changing asset design, production demand and supply management, maintenance demands, asset operation and process control structures, technological innovations, and the support processes governing asset operation in manufacturing, production and service industries. It takes lifecycle perspective of asset management by addressing economic and performance tradeoffs, decision support, information flows, and process re-engineering needs of superior asset design, operation, maintenance, decommissioning, and renewal.

References

  1. Albino, V., Garavelli, A. C., and Okogbaa, O.G. (1998). “Vulnerability of production systems with multisupplier network: a case study.” International Journal of Production Research, 36(11), pp.3055-3066.
  2. Almgren, H., (1999). “Towards a framework for analyzing efficiency during start-up: An empirical investigation of a Swedish auto Manufacturer.” International Journal of Production Economics, 60-61, pp.79-86.
  3. Al-Najjar, B., (1996). “Total quality maintenance An approach for continuous reduction in cost of quality products.” Journal of Quality in Maintenance Engineering, 2(3), pp. 4-23.
  4. Bamber, C. J., Sharp, J. M., and Hides, M.T., (1999). “Factors affecting successful implementation of total productive maintenance.” Journal of Quality in Maintenance Engineering, 5(3), pp.162-181.
  5. Beach, R., Muhlemann, A. P., and Price, D.H.R., (2000). “Manufacturing operations and strategic flexibility: survey and cases.” International Journal of Operations & Production Management, 20(1), pp.7- 30.
  6. Bever, K., (2000), “Understanding Plant Asset Management Systems”, Maintenance Technology, July/August, pp. 20-25
  7. Blanchard, B. S., (1997). “An enhanced approach for implementing total productive maintenance in the manufacturing environment.” Journal of Quality in Maintenance Engineering, 3(2), pp.69-80.
  8. Duffuaa, S., Ben-Daya, M., Al-Sultan, K., and Andijani, A., (2001), “A Generic Conceptual Simulation Model for Maintenance Systems”, Journal of Quality in Maintenance Engineering, 7(3), pp. 207-19.
  9. Duffuaa, S.O., Cambel, J.D., and Raouf, A., (1999), “Planning and Control of Maintenance Systems: Modelling and Analysis”, John Wiley & Sons, New York.
  10. Grobholz, H. R., (1988), “Managementaufgabe Instandhaltung”, 2 Auflage
  11. Honkanen, T., (2004), “Modelling Industrial Maintenance Systems and the Effects of Automatic Condition Monitoring”, Phd Thesis, Helsinki University of Technology, Information and Computer Systems in Automation
  12. Horner, R., El-Haram, M., and Munns, A., (1997), “Building maintenance strategy: a new management approach”, Journal of Quality in Maintenance Engineering, 3(4), pp. 273-280.
  13. IIM, ( 2002), “International Infrastructure Manual”, National Asset Management Steering Group, Australia New Zealand Edition, Thames, ISBN 0-473-09137-2
  14. Intentia, (2004), “Enterprise Asset Management Benchmark Survey: How do you measure your maintenance performance?”, The Maintenance Journal. February, pp.52 -70.
  15. Jonsson, P., (1999), “The Impact of Maintenance on the Production Process - Achieving High Performance”, Doctoral thesis, Division of Production Management, Lund University. Lund, Sweden.
  16. Koc, M., Lee, J., (2003), “A System Framework for NextGeneration E- Maintenance Systems”, IMS: Centre for Intelligent Maintenance Systems, Milwaukee, accessed online at http://www.uwm.edu/CEAS/ims/pdffiles/EMaintenance.PDF, on June 27, 2004.
  17. Lawrence, J. L., (1999), “Use mathematical modeling to give your TPM implementation effort an extra boost.” Journal of Quality in Maintenance Engineering, 5(1), pp. 62-69.
  18. Lee, J., (2003), “E-Intelligence Strategies for Product Manufacturing Innovation”, IMS: Centre for Intelligent Maintenance Systems, Milwaukee, accessed online at http://www.uwm.edu/CEAS/ims/pdffiles/EIntelligence Strategies.PDF,on June 27, 2004.
  19. Matson, J., and McFarlane, D., (1998), “Tools for Assessing the Responsiveness of Existing Production Operations”, IEE Workshop on Responsiveness in Manufacturing, London, UK, February.
  20. Moubray, J., (1991), “Reliability-centred Maintenance”, Oxford, Butterworth-Heinemann Ltd.
  21. Moubray, J., (2003), “21st Century Maintenance Organization Part I: The Asset Management Model”, Maintenance Technology, accessed online at http://www.mtonline.com/articles/0203_asset_mgmtt.cfm, on July 12, 2004.
  22. Nakajima, S., (Eds). (1989), “TPM Development Program: Implementing Total Productive Maintenance”, Cambridge, Productivity Press, Inc.
  23. Sandberg, U., (1994), “The Coupling Between Process and Product Quality - The interplay Between Maintenance and Quality in Manufacturing”, Euromaintenance 94, Amsterdam.
  24. Taskinen, T., and Smeds R., (1999), “Measuring change project management in manufacturing.” International Journal of Operations & Production Management, 19(11), pp. 168-1187.
  25. Warnecke, H. J., and Hueser, M., (1994), “Technologies of Advanced Manufacturing”, Organization and Management of Advanced Manufacturing, W. Karwowski and G. Salvendy (Eds), New York, John Wiley & Sons INC:.
  26. Woodhouse, J., (2001), “Asset Management”, The Woodhouse Partnership Ltd, online accessed on May 10, 2004 at http://www.plantmaintenance.com/articles/AMbasicintro.pdf
  27. Yamashina, H., and Otani, S., (2001), “Optimal Preventive Maintenance Planning For Multiple Elevators”, Journal of Quality in Maintenance Engineering, 7(2), pp. 128-50.
Download


Paper Citation


in Harvard Style

Haider A. and Koronios A. (2005). ICT BASED ASSET MANAGEMENT FRAMEWORK . In Proceedings of the Seventh International Conference on Enterprise Information Systems - Volume 3: ICEIS, ISBN 972-8865-19-8, pages 312-322. DOI: 10.5220/0002531803120322


in Bibtex Style

@conference{iceis05,
author={Abrar Haider and Andy Koronios},
title={ICT BASED ASSET MANAGEMENT FRAMEWORK},
booktitle={Proceedings of the Seventh International Conference on Enterprise Information Systems - Volume 3: ICEIS,},
year={2005},
pages={312-322},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002531803120322},
isbn={972-8865-19-8},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Seventh International Conference on Enterprise Information Systems - Volume 3: ICEIS,
TI - ICT BASED ASSET MANAGEMENT FRAMEWORK
SN - 972-8865-19-8
AU - Haider A.
AU - Koronios A.
PY - 2005
SP - 312
EP - 322
DO - 10.5220/0002531803120322