Modelling and Simulation of the Temperature Control System in the Heating Installations from Nonresidential Buildings

Daniel Popescu, Ioan Borza

2016

Abstract

The article addresses specific issues of the automated heating systems for non-residential buildings, which aim to ensure thermal comfort with low energy consumption. The specialized automatic system maintains constant the indoor temperature when the heat input in building equals the heat loss through the building envelope. The specialized automatic system consists of several subsystems. The model for each subsystem is obtained considering the particularities of the heating processes from buildings and requirements for the thermal comfort. By simulating the operation of the specialized automatic system is obtained the time behavior for the main physical values that characterizes the system, relevant to the quality of the heating temperature control in the building. The operation of the automatic controller and the control valve are analyzed by simulation, in a comparable time interval with transient regime of the automatic heating system of the real building. The validation of the model is done by comparing the results obtained by simulation with results of experimental measurements in the real automatic system, implemented in the building chosen for study.

References

  1. Arguello-Serrano, B., Velez-Reyes, M., 2002. Nonlinear control of a heating, ventilating, and air conditioning system with thermal load estimation”. Control Systems Technology, IEEE Transactions 7(1).
  2. Balan, R., Stan, S.D., Lapusan, C., 2009. A Model Based Predictive Control Algorithm for Building Temperature Control. IEEE International Conference on Digital Ecosystems and Technologies: 541-546.
  3. Balan, R., Hancu, O., Stan, S., Lapusan, C., Donca, R., 2009. Application of a Model Based Predictive Control Algorithm for Building Temperature Control. Book Series: Energy and Environmental Engineering Series: 97-101.
  4. Castilia, M.M., Alvarez, J.D., Rodriguez, F., 2004. Berenguel, M., Comfort Control in Buildings. Springer, ISBN 978-1-4471-6347-3 (e-book).
  5. Castilia, M.M., Alvarez, J.D., Rodriguez, F., Berenguel, M., 2014. Comfort Control in Buildings. Springer, ISBN 978-1-4471-6347-3 (e-book).
  6. Chmielnicki, W.J., 2011. Impact of the indoor temperature control algorithm in the building on the consumption of the heat. Rynek Energii 6: 66-73.
  7. Clements-Croome, D.J., 1996. Freshness, ventilation and temperature in offices. BSERT, 17 (11), 21-27.
  8. Clements-Croome, D.J., 2011. The interaction between the physical environment and people. In: S.A. AbdulWahab, ed. Sick building syndrome in public buildings and workplaces. Berlin Heidelberg: Springer-Verlag, 239-261.
  9. Clements-Croome, D.J., Li, B., 2000. Productivity and Indoor Environment, BSERT, 1, pp. 629-634.
  10. Clements-Croome, D.J., Editor, 2006. Creating the productive workplace. Second Edition, 468 pages, ISBN 13: 978-0-415-35138-6, Taylor & Francis, London and New York.
  11. Ilina, M. (coordinator), 2010. Technical Encyclopedia of Installations, vol. I, ISBN 978-973-85936-5-7, Publishing House Artecno Bucharest.
  12. Kim, B.-Y., Ahn, H.-S., 2013. Coordination and control for building automation systems, International Conference on Control, Automation and Systems, Pages 614-616.
  13. Liao, Z., Dexter, A.L., 2004. A simplified physical model for estimating the average air temperature in multi-zone heating systems. Building and Environment, 39(9): 1013-1022.
  14. Ma, Y.D., Anderson, G., Borrelli, F., 2011. A Distributed Predictive Control Approach to Building Temperature Regulation. Proceedings of the American Control Conference.
  15. Mira, N. (coordinator), 2010. Technical Encyclopedia of Installations, vol. E, ISBN 978-973-85936-5-7, Publishing House Artecno Bucharest.
  16. Oancea, C., Caluianu, S., 2012. Analysis of non-residential buildings in Romania from the labour productivity and intelligent buildings concept point of view. Intelligent Buildings International, Volume 4, Issue 4, pages 216- 227, Publisher Taylor & Francis Ltd., ISSN 1750-8975.
  17. Popescu D., 2004. Régulation d'un système de chauffage des bâtiments. Proceedings of the 7th International Conference on Development and Application Systems. pp. 6-9, ISBN 973-666-106-7.
  18. Popescu, D., 2014. Specific problems on the operation of the automatic control system of temperature into an individual dwelling. WSEAS Transactions on Systems, Volume 13, 2014, pp. 482-491. E-ISSN: 2224-2678.
  19. Popescu, D., 2008. A New Solution for Automatic Control of Heating Systems in Buildings Based on Measuring Heat Transfer Through Outer Surfaces. Proceedings of the 10th WSEAS International Conference on Automatic Control, Modeling and Simulation, pp. 206- 209, ISSN 1790-5117.
  20. Popescu, D., Ciufudean, C., 2012. Indoor thermal comfort by controlling heat transfer through building envelope The 13th International Conference on Automation & Information, pp. 150-155, ISBN 978-1-61804-099-2.
  21. Popescu, D., Ciufudean, C., 2008. Automatic Control System for Heating Systems in Buildings Based on Measuring the Heat Exchange through Outer Surfaces. Proceedings of the 8th WSEAS International Conference on Simulation, Modelling and Optimization, pp. 117-121, ISSN 1790-2769.
  22. Popescu, D., Ciufudean, C., 2012. Indoor thermal comfort by controlling heat transfer through building envelope. The 13th International Conference on Automation & Information, pp. 150-155, ISBN 978-1-61804-099-2.
  23. Popescu, D., Ciufudean, C., Ionescu, D., 2009. Experimental Analysis of the Automated System for Heating Control based on Heat Losses through Building's Envelope. 9th WSEAS International Conference on Simulation, Modelling and Optimization. pp. 160 - 166, ISSN 1790-2769.
  24. Popescu, D., Ciufudean, C., Ghiaus, A., 2009. Specific Aspects of Design of the Automated System for Heating Control that Accounts for Heat Losses Through the Building's Envelope. Proceedings of the 13th WSEAS International Conference on Systems. pp. 352 - 356, ISSN 1790-2768.
  25. Seppanen, O., Fisk, W.J., and Lei, Q.H., 2006. Room temperature and productivity in office work. Berkeley: Lawrence Berkeley National Laboratory. Available http://escholarship.org/uc/item/9bw3n707.
  26. Wagner A. and Schakib-Ekbatan K., 2011. User satisfaction as a measure of workplace quality. Detail Work Environments, Edited by Christian Schittlich, 54- 57.
  27. Wargocki, P., Seppanen, O., Andersson, J., Boerstra, A., Clements-Croome, D., Fitzner, K., Hanssen, S.O., 2006. Indoor Climate and Productivity in Offices. REHVA Guidebook no 6. ISBN 2-9600468-5-4.
Download


Paper Citation


in Harvard Style

Popescu D. and Borza I. (2016). Modelling and Simulation of the Temperature Control System in the Heating Installations from Nonresidential Buildings . In Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems - Volume 1: MoMa-GreenSys, (SMARTGREENS 2016) ISBN 978-989-758-184-7, pages 454-461. DOI: 10.5220/0005906404540461


in Bibtex Style

@conference{moma-greensys16,
author={Daniel Popescu and Ioan Borza},
title={Modelling and Simulation of the Temperature Control System in the Heating Installations from Nonresidential Buildings},
booktitle={Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems - Volume 1: MoMa-GreenSys, (SMARTGREENS 2016)},
year={2016},
pages={454-461},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005906404540461},
isbn={978-989-758-184-7},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems - Volume 1: MoMa-GreenSys, (SMARTGREENS 2016)
TI - Modelling and Simulation of the Temperature Control System in the Heating Installations from Nonresidential Buildings
SN - 978-989-758-184-7
AU - Popescu D.
AU - Borza I.
PY - 2016
SP - 454
EP - 461
DO - 10.5220/0005906404540461