ELIMINATION OF TIME DEPENDENCE OF INFORMATION VALIDITY BY APPLICATION OF RFID TECHNOLOGY

Vladimir Modrak, Viaceslav Moskvic

2006

Abstract

Following article deals with certain aspects of data acquisition for MRP, ERP and MES type of information systems from a shop floor level. Problems of time dependence of data validity are discussed and method of their elimination by application of radio frequency identification technology (RFID) is suggested.

References

  1. Auto-ID center, 2002. Technology guide, Massachusetts Institute of Technology, Cambridge
  2. ALTA A/S,2003. White paper, Strategies for in sequence supply, Copenhagen
  3. Bernroider, E., Koch,S., 2000. Differences in Characteristics of the ERP System Selection Process between Small or Medium and Large Organizations, In AMCIS 2000, Sixth Americas Conference on Information Systems, pp. 1022-1028, Long Beach, CA
  4. Chappell, G., Ginsburg, L., Schmidt, P.,Smith, J., Tobolski, J, 2003. Auto-ID on the Line: The Value of Auto-ID Technology in Manufacturing, Auto-ID Center, Massachusetts Institute of Technology, Cambridge
  5. Choi, B., Kim, B., 2002. MES architecture for FMS compatible to ERP. In International Journal of Computer integrated manufactuirng, Vol.15, No.3
  6. Czarnecki, H., Loyd, N., 2000. Simulation of Lean Assembly Line for High Volume Manufacturing. Center for Automation and Robotics, University of Alabama
  7. Donovan, R.M.,2005. SCM: Cracking the „Bullhip Effect“, R.Michael Donovan & Co., Framingham
  8. DoD suppliers passive RFID information guide,2005, Version 6.0, January 17
  9. Kisiel, T., 2001. Manufacturing Execution Systems: Steps to a Successful Implementation. DAI White Paper, Digital Applications International, London, United Kingdom
  10. Kumar, V., 1996. Introduction to automation, University of Pennsylvania
  11. Lawless, G., 2000. Information Technology (IT) For Manufacturing: Where Has It Been, Where Is It Heading?.In: Journal of Industrial Technology,Vol.16, Numb.4
  12. Modrak, V, 2005. Functionalities and Position of Manufacturing Execution Systems. In Encyclopedia of Information Science and Technology, Volume 1-5. Idea Group Reference, Hershey, PA, USA
  13. MESA #2,1997. MES functionalities and MRP to MES Data Flow Possibilities White Paper 2, Manufacturing Execution Systems Association, Pitsburgh, P.A.
  14. Ohno, T., 1988. Toyota Production System, Productivity Press
  15. Ohuchi A., Okuda Y., Nakamura Y., Hitomi M. , H. Tomita, 2001. A Study of Simulation Model of Human-Oriented Production Process in Consideration of Human Factors. In Publication of Industry Applications Society, Vol. 121D, Numb. 6,
  16. Rockwell automation white paper, 2004. A practical guide on extracting measurable value from RFID implementations in plant and warehousing operations”, October issue
  17. Sarma, S., 2003. Towards 5 cent tag. Auto-ID Center Massachusetts Institute of Technology, Cambridge
  18. Silva,L., Ramos, A.,Vilarinho,P., 2000. Using simulation for manufacturing process reengineering. A practical case study. In Proceedings of the 2000 Winter Simulation Conference
  19. Stageman,L., 2004. Consumer Awareness and Concern About RFID on the Rise. In Market Wire, December issue
  20. Strassner,M.,Fleisch,E., 2003. The Promise of Auto-ID in the Automotive Industry. Auto-ID Center, Massachusetts Institute of Technology, Cambridge
  21. Taylor,D. ,Brunt,D., 2000. Manufacturing Operations and Supply Chain Management The LEAN Approach”
  22. Viswanadham,N., 2002. Past, present and future of Supply chain automation. In IEEE Robotics and automation magazine
  23. Vokorokos, L., Adám, N., Petrík , S., 2004. Operating Matching In dynamic Data flow Architectures. In Proceedings of IEEE International conference on Computational Cybernetics. Vienna, Austria
  24. Weigert,G., Werner,S., Hampel,D., 2000. ROSI - Ein Programmsystem zur Simulation und Optimierung von Fertigungsprozessen. 9. ASIM-Fachtagung Simulation in Produktion und Logistik“, Berlin
Download


Paper Citation


in Harvard Style

Modrak V. and Moskvic V. (2006). ELIMINATION OF TIME DEPENDENCE OF INFORMATION VALIDITY BY APPLICATION OF RFID TECHNOLOGY . In Proceedings of the Eighth International Conference on Enterprise Information Systems - Volume 1: ICEIS, ISBN 978-972-8865-41-2, pages 130-135. DOI: 10.5220/0002450001300135


in Bibtex Style

@conference{iceis06,
author={Vladimir Modrak and Viaceslav Moskvic},
title={ELIMINATION OF TIME DEPENDENCE OF INFORMATION VALIDITY BY APPLICATION OF RFID TECHNOLOGY},
booktitle={Proceedings of the Eighth International Conference on Enterprise Information Systems - Volume 1: ICEIS,},
year={2006},
pages={130-135},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002450001300135},
isbn={978-972-8865-41-2},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Eighth International Conference on Enterprise Information Systems - Volume 1: ICEIS,
TI - ELIMINATION OF TIME DEPENDENCE OF INFORMATION VALIDITY BY APPLICATION OF RFID TECHNOLOGY
SN - 978-972-8865-41-2
AU - Modrak V.
AU - Moskvic V.
PY - 2006
SP - 130
EP - 135
DO - 10.5220/0002450001300135