ON THE SAMPLING PERIOD IN STANDARD AND FUZZY CONTROL ALGORITHMS FOR SERVODRIVES - A Multicriterial Design and a Timing Strategy for Constant Sampling

Dan Mihai

2008

Abstract

The paper deals with the best choice for the control sampling period in term of a multicriterial conditioning, with the on-line timing and with a comparison between the conventional (like PI) control algorithms and the fuzzy control. Several useful relations are followed by diagrams obtained in simulation and by different real-time recordings both for the timing and for characteristic variables of the system. Implementations with microcontroller and DSP are used for analyzing the design criterion and the timing strategy. The application field concerns a servodrive, so the real-time constraints are quite strong. The author conceived a general control strategy for the on-line timing based on imbricate interrupts, each pulse encoder acting on the hardware input interrupt of the control processor.

References

  1. Astrom, K.J., Wittenmark, B., 1997. Computer-controlled systems: theory and design, Prentice Hall, USA.
  2. Coleman C. P., Godbole D., 1994. A Comparison of Robustness: Fuzzy Logic, PID and Sliding Mode Control, Proc. of the American Control Conference, pp. 1654-1659.
  3. Do Wan, K., Jin Bae, P., Young Hoon, J., 2007. Effective digital implementation of fuzzy control systems based on approximate discrete-time models, Automatica (IFAC Jour.), Volume 43 , Issue 10, pp. 1671-1683.
  4. Ibbini, M.S., Jafar, A.S., 2002. Self-Tuning Fuzzy Logic Controller for a Series DC Motor, Proc. (369) Power and Energy Systems, Acta Press.
  5. Kozek, M., Lorenz, A., Kampas, Ph., 2007. Modeling and control of an electric servo drive with strong restrictions in the control variable, Int. Journal of Applied Electromagnetics and Mechanics, Vol. 25, Number 1-4, pp. 521 - 527.
  6. Mihai, D., Constantinescu C., 1999. Fuzzy Versus Standard Digital Control for a Precise Positioning System with Low-Cost Microcontroller, PCIM99, Nurnberg, Proceedings, pp. 249-255.
  7. Mihai, D., 2004. Systèmes d'entraînements électriques I. Problèmes fondamentaux. Systèmes avec moteurs à courant continu, Ed. Universitaria, Craiova.
  8. Mihai, D., 2006a. Additional Mathematical Pre-processing for the Fuzzy Control of a Servodrive, WSEAS Trans. on Circuits and Systems, Is. 11, Vol. 5, pp. 1575-1580.
  9. Mihai, D., 2006b. An Optimized Fuzzy Control Algorithm for Servodrives. Some Real-Time Experiments. Proceedings, IS 7806, London, paper 1-4244-0195- X/06-CD ROM, pp. 192-197.
  10. Mrozek, B, Mrozek, Z., 2000. Modelling and Fuzzy Control of DC Drive, ESM 2000, Ghent, pp186-190.
  11. Silveira, P. E., Souza, J.R., Biazotto R. de, V. M., 2002. Speed Control of an Autonomous Mobile Robot: Comparison between a PID Control and a Control Using Fuzzy Logic, J. Braz. Soc. Mech. Sci., vol.24, no.2, pp.127-129.
  12. Vas, P., 1999. Artificial-Intelligence-Based Electrical Machines and Drives, Oxford University Press.
  13. *** Technosoft S. A., 1997, MCK 240 DSP Motion Control Kit. User Manual, Switzerland.
Download


Paper Citation


in Harvard Style

Mihai D. (2008). ON THE SAMPLING PERIOD IN STANDARD AND FUZZY CONTROL ALGORITHMS FOR SERVODRIVES - A Multicriterial Design and a Timing Strategy for Constant Sampling . In Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO, ISBN 978-989-8111-32-6, pages 72-77. DOI: 10.5220/0001477600720077


in Bibtex Style

@conference{icinco08,
author={Dan Mihai},
title={ON THE SAMPLING PERIOD IN STANDARD AND FUZZY CONTROL ALGORITHMS FOR SERVODRIVES - A Multicriterial Design and a Timing Strategy for Constant Sampling},
booktitle={Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,},
year={2008},
pages={72-77},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0001477600720077},
isbn={978-989-8111-32-6},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,
TI - ON THE SAMPLING PERIOD IN STANDARD AND FUZZY CONTROL ALGORITHMS FOR SERVODRIVES - A Multicriterial Design and a Timing Strategy for Constant Sampling
SN - 978-989-8111-32-6
AU - Mihai D.
PY - 2008
SP - 72
EP - 77
DO - 10.5220/0001477600720077