CONTROL STRATEGY OF CONSTANT MILLING FORCE SYSTEM AND METAL REMOVAL RATE MAXIMIZION

Franc Cus, Joze Balic, Uros Zuperl

Abstract

An adaptive control system in conjunction with off-line optimization is built which controlling the cutting force and maintaining constant roughness of the surface being milled by digital adaptation of cutting parameters. In this way it compensates all disturbances during the cutting process: tool wear, non-homogeneity of the workpiece material, vibrations, chatter etc. The basic adaptive control design is based on the control scheme (UNKS) consisting of two neural identificators of the process dynamics and primary neural regulator.

References

  1. Balic, J., 2000. A new NC machine tool controller for step-by-step milling. Int. j. adv. manuf. technol. 8, pp. 399-403.
  2. Chen, C., Zhibin, M., (2006). An intelligent approach to non-constant feed rate determination for highperformance 2D CNC milling. International Journal of Manufacturing Technology and Management. pp. 219-236.
  3. Cus, F., Balic, J., 2003. Optimization of cutting process by GA approach. Robot. comput. integr. manuf., 19 , pp. 113-121.
  4. Kopac, J., 2002. Rezalne sile in njihov vpliv na gospodarnost obdelave = Cutting forces and their influence on the economics of machining. Stroj. vestn. 3, pp. 121-132.
  5. Mursec, B., Cus, F., Balic, J., 2000. Organization of tool supply and determination of cutting conditions. J. mater. process. Technol., 100, pp. 241-249.
  6. Zuperl, U., Cus, F., 2004. A determination of the characteristic technological and economic parameters during metal cutting. Stroj. vestn. pp. 252-266.
  7. Zuperl, U., Cus, F., 2003. Optimization of cutting conditions during cutting by using neural networks. Robot. comput. integr. Manuf., 19 ,pp. 189-199.
  8. Zuperl, U., Cus F., 2005. Tool cutting force modeling in ball-end milling using multilevel perceptron. J. mater. process. technol.
Download


Paper Citation


in Harvard Style

Cus F., Balic J. and Zuperl U. (2010). CONTROL STRATEGY OF CONSTANT MILLING FORCE SYSTEM AND METAL REMOVAL RATE MAXIMIZION . In Proceedings of the 7th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO, ISBN 978-989-8425-00-3, pages 265-268. DOI: 10.5220/0002959602650268


in Bibtex Style

@conference{icinco10,
author={Franc Cus and Joze Balic and Uros Zuperl},
title={CONTROL STRATEGY OF CONSTANT MILLING FORCE SYSTEM AND METAL REMOVAL RATE MAXIMIZION},
booktitle={Proceedings of the 7th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},
year={2010},
pages={265-268},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002959602650268},
isbn={978-989-8425-00-3},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 7th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,
TI - CONTROL STRATEGY OF CONSTANT MILLING FORCE SYSTEM AND METAL REMOVAL RATE MAXIMIZION
SN - 978-989-8425-00-3
AU - Cus F.
AU - Balic J.
AU - Zuperl U.
PY - 2010
SP - 265
EP - 268
DO - 10.5220/0002959602650268