Optimized Chipping Processes with a New Mechatronic Tool System - Application of Strain Gauge Sensors and Piezoelectric Actuators

Franz Haas, Elke Nuspl, Manfred Pauritsch

2012

Abstract

The paper introduces a new measurement device which allows collecting the chipping force in three directions and additionally the process temperature. The apparatus consists of a specially designed tool holder with integrated strain gauges, the electronic measuring equipment and the evaluation software. During the first period a new device for research and development purposes has been designed, experiments on innovative materials are presented including the comparison with simulation results. The next step of the project incorporates the product development based on the previous experience with targets accuracy, cost effectiveness, reliability and the possibility of active damping of tool vibrations. To achieve the last mentioned demand a piezoelectric actuator is integrated into the tool shank and works against the vibration forces.

References

  1. Audy J., 2006. An appraisal of techniques and equipment for cutting force measurement, In Journal of Zhejiang University, p. 1781-1789.
  2. Blaha, J., Horwatitsch, D., (et al.), (2010). Endbericht F&E Headquarter Strategy, TCM International Tool Consulting & Management GmbH, p. 7-28.
  3. Haas, F., Nuspl, E., 2011. Präzises, schnelles Messgerät für mobiles Condition Monitoring von Zerspa nungsprozessen, In AALE 2011, p. 161-169.
  4. Horwatitsch, D. (et al.), (2007). Ermittlung der Reibung zur Verwendung in einer FE-basierten Prozesssimulation eines Zerspanungsprozesses, In Proceedings ÖTG Symposium 2007, p. 45-52.
  5. Kistler (Ed.), 2009. Präzise Messsysteme für die spanabhebende Fertigung, p. 7-9.
  6. Tani, Y., Hatamura, Y., Nagao, T., (1983). Development of Small Three-component Dynamometer for Cutting Force Measurement, p. 657-658.
Download


Paper Citation


in Harvard Style

Haas F., Nuspl E. and Pauritsch M. (2012). Optimized Chipping Processes with a New Mechatronic Tool System - Application of Strain Gauge Sensors and Piezoelectric Actuators . In Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO, ISBN 978-989-8565-21-1, pages 614-617. DOI: 10.5220/0004044006140617


in Bibtex Style

@conference{icinco12,
author={Franz Haas and Elke Nuspl and Manfred Pauritsch},
title={Optimized Chipping Processes with a New Mechatronic Tool System - Application of Strain Gauge Sensors and Piezoelectric Actuators},
booktitle={Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},
year={2012},
pages={614-617},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0004044006140617},
isbn={978-989-8565-21-1},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,
TI - Optimized Chipping Processes with a New Mechatronic Tool System - Application of Strain Gauge Sensors and Piezoelectric Actuators
SN - 978-989-8565-21-1
AU - Haas F.
AU - Nuspl E.
AU - Pauritsch M.
PY - 2012
SP - 614
EP - 617
DO - 10.5220/0004044006140617