Knowledge Presentation based on Multi-dimension Model for Measuring Planning in Digital Manufacturing

Xiaoqing Tang, Zhehan Chen

Abstract

Digital measurement technology has been widely employed in product manufacturing process. In general, a measuring process is planned based on human knowledge in planning strategies, measuring regulations, de-vices and instruments, measuring operations and historical data. Knowledge-supported measuring planning makes the process formatted, and enables manufacturers to improve product quality and reduce manufacturing cost. Therefore, accumulating, presenting and modeling the measuring data, information and expertise knowledge from engineering sectors, which can provide a foundation for discovering and reusing knowledge of measuring process, are crucial for planning and optimizing a measurement plan. In order to improve measurement plans based on expertise knowledge, a general measurement space (GMS) model of measuring process is proposed. The model makes the attributes in three dimensions to describe and classify multi-source and heterogeneous knowledge in the measuring process. The methodology for integrating and expressing measuring process knowledge is then discussed, in order to support the storage, management and analysis of structured knowledge data based on programs. Finally, the GMS’s characteristics matrix is constructed, providing a feasible way to evaluate measurement plans based on measuring process knowledge.

References

  1. Chen, Z. H., Du, F. Z., 2012. Research on Key Measurement Field Building Technologies for Aircraft Digital Assembly. Aeronautical Manufacturing Technology, (22), pp 44-47.
  2. Chen, Z. H., Du, F. Z., et al., 2012. Key Measurement Characteristics Based Inspection Data Modeling for Aircraft Assembly. Acta Aeronautica et Astronautica Sinica, 33(11), pp 2143-2152.
  3. DE-DIN, 2003. Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994).
  4. Du, F.,Z., Chen, Z. H., 2011. Research on the implementation technologies of measurement driven aircraft subassembly digital joining system. Aeronautical Manufacturing Technology, (17), pp 52-55.
  5. Du, F. Z., Chen, Z. H., et al., 2012. Precision analysis of iGPS measurement field and its application. Acta Aeronautica et Astronautica Sinica, 33(9), pp 1737-1745.
  6. Jamshidi, J., Kayani, A., et al., 2010. Manufacturing and assembly automation by integrated metrology systems for aircraft wing fabrication. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(25), pp 25-36.
  7. Jayaweera. N., Webb, P., et al., 2010. Measurement assisted robotic assembly of fabricated aero-engine components. Assembly Automation, 30(1), pp 56-65.
  8. Jody, M., Amir, K., et al., 2011. Measurement assisted assembly and the roadmap to part-to-part assembly. In: Proceedings of DET2011. 7th International Conference on Digital Enterprise Technology. 2011.
  9. Liu, S. L., Luo, Z. G., et al., 2013. 3D measurement and quality evaluation for complex aircraft assemblies. Acta Aeronautica et Astronautica Sinica, 34(2), pp 409- 418.
  10. Maropoulos, P. G., Zhang, D., et al., 2007. Key digital enterprise technology methods for large volume metrology and assembly integration. International Journal of Production Research, 45(7), pp 1539-1559.
  11. Maropoulos, P. G., Guo, Y., et al., 2008. Large volume metrology process models: A framework for integrating measurement with assembly planning. CIRP Annals - Manufacturing Technology, 57, pp 477-480.
  12. Maisano, D. A., Jamshidi, J., et al., 2008. Indoor GPS: system functionality and initial performance evaluation. International Journal of Manufacturing Research, 3(3), pp 335-349.
  13. Muelaner, J. E., Wang, Z., et al., 2009. Study of the uncertainty of angle measurement for a rotary-laser automatic theodolite (R-LAT). Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, (223), pp 217-229.
  14. Maisano, D. A., Jamshidi, J., et al., 2009. A comparison of two distributed large-volume measurement systems: the mobile spatial coordinate measuring system and the indoor global positioning system. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(B3), pp 511- 521.
  15. Muelaner, J. E., Cai, B., et al., 2010. Large volume metrology instrument selection and measurability analysis. Proceedings of the Institution of Mechanical Engineers, Part B journal of Engineering Manufacture, 224(6), pp 853-868.
  16. Muelaner, J. E., Maropoulos, P. G., 2010. Design for measurement assisted determinate assembly (MADA) of large composite structures. Journal of the CMSC, 5(2), pp 18-25.
  17. Peggs, G. N., Maropoulos, P. G., et al, 2009. Recent developments in large-scale dimensional metrology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223, pp 571-595.
  18. Wang, Z., Liang, M., et al., 2011. High accuracy mobile robot positioning using external large volume metrology instruments. International Journal of Computer Integrated Manufacturing, 24(5), pp 484-492.
  19. Wang, Q., Zissler, N., et al., 2013. Evaluate error sources and uncertainty in large scale measurement systems. Robotics and Computer-integrated Manufacturing, 29(1), pp 1-11.
  20. Yu, Y., Tao, J., et al., 2009. Assembly technology and process of Boeing 787 jet. Aeronautical Manufacturing Technology, (14), pp 44-47.
Download


Paper Citation


in Harvard Style

Tang X. and Chen Z. (2013). Knowledge Presentation based on Multi-dimension Model for Measuring Planning in Digital Manufacturing . In Proceedings of the International Conference on Knowledge Discovery and Information Retrieval and the International Conference on Knowledge Management and Information Sharing - Volume 1: KDIR, (IC3K 2013) ISBN 978-989-8565-75-4, pages 67-73. DOI: 10.5220/0004514100670073


in Bibtex Style

@conference{kdir13,
author={Xiaoqing Tang and Zhehan Chen},
title={Knowledge Presentation based on Multi-dimension Model for Measuring Planning in Digital Manufacturing },
booktitle={Proceedings of the International Conference on Knowledge Discovery and Information Retrieval and the International Conference on Knowledge Management and Information Sharing - Volume 1: KDIR, (IC3K 2013)},
year={2013},
pages={67-73},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0004514100670073},
isbn={978-989-8565-75-4},
}


in EndNote Style

TY - CONF
JO - Proceedings of the International Conference on Knowledge Discovery and Information Retrieval and the International Conference on Knowledge Management and Information Sharing - Volume 1: KDIR, (IC3K 2013)
TI - Knowledge Presentation based on Multi-dimension Model for Measuring Planning in Digital Manufacturing
SN - 978-989-8565-75-4
AU - Tang X.
AU - Chen Z.
PY - 2013
SP - 67
EP - 73
DO - 10.5220/0004514100670073