Smart Fabrication of Robotic Systems - A Project with University Students

Vanessa Nickel, Pablo Ottersbach, Robert Reichert, Michael Schäfer

Abstract

This paper describes the progression of new construction technologies to rapid prototype multicopters. Based on ideas of the growing maker-community, university students used 3D-printing and laser-cutting technologies to build copters with individual features. In this case a flight without visual contact should be realised by mounting a camera in front of the copter. Both technologies were used in competition and the better requirements satisfying copter was built.

References

  1. Gershenfeld, Neil, 2012 How to Make Almost Anything: The Digital Fabrication Revolution Foreign Affairs 91, no. 6 (November-December 2012): 43-57.
  2. Kasparova, M., Grafova, L., Dvorak, P., Dostalova, T., Prochazka, A., Eliasova, H., Prusa, J., Kakawand, S., 2013 Possibility of reconstruction of dental plaster cast from 3D digital study models.
  3. McKinsey & Company, Loc. Cit., 2013 The revival of the West 21st Century Investment themes, In Perspective.
  4. Jijotiya, Deepika, Dr. Lal Verma, Prap hu, 2013 A survey of Performance based Advanced Rapid Prototyping Techniques Scholars Journal of Engineering and Technologies (SJET).
  5. Simonite, Tom, 2010 I, replicator: Self-replicating machines comes of age New Scientist, Volume 206, Issue 2762, 26 May 2010, Pages 40-43.
  6. Hou, M., Ho, G., Arrabito, G.R., Young, S., Yin, S., March 2013 Effects of Display Mode and Input Method for Handheld Control of Micro Aerial Vehicles for a Reconnaissance Mission IEEE Transactions on Human-Machine Systems, Vol. 43, No. 2.
  7. Karl Erik Årzén, 2013 Experiences of a CPS course on Embedded Control.
  8. Adam Zimmermann, 2012 Starl for Programming Reliable Robotic Networks.
  9. Technical University of Munich, 2010 DauerflugWeltrekord für Quadrocopter.
  10. Mohd Bijarimi, Sahrim Ahmad, Rozaidi Rasid, 2012 Mechanical, Thermal and Morphological.
  11. Eurapipe, 2013 ABS Material Retrieved from http://xahax.com/subory/Spec_ABS.pdf.
  12. Schäfer, M., Jansen, M., Seabra da Rocha, S. F., 2013 About Multicopters and Other Smart Devices for Environmental Monitoring.
Download


Paper Citation


in Harvard Style

Nickel V., Ottersbach P., Reichert R. and Schäfer M. (2014). Smart Fabrication of Robotic Systems - A Project with University Students . In Proceedings of the 3rd International Conference on Sensor Networks - Volume 1: SENSORNETS, ISBN 978-989-758-001-7, pages 345-350. DOI: 10.5220/0004699103450350


in Bibtex Style

@conference{sensornets14,
author={Vanessa Nickel and Pablo Ottersbach and Robert Reichert and Michael Schäfer},
title={Smart Fabrication of Robotic Systems - A Project with University Students},
booktitle={Proceedings of the 3rd International Conference on Sensor Networks - Volume 1: SENSORNETS,},
year={2014},
pages={345-350},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0004699103450350},
isbn={978-989-758-001-7},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 3rd International Conference on Sensor Networks - Volume 1: SENSORNETS,
TI - Smart Fabrication of Robotic Systems - A Project with University Students
SN - 978-989-758-001-7
AU - Nickel V.
AU - Ottersbach P.
AU - Reichert R.
AU - Schäfer M.
PY - 2014
SP - 345
EP - 350
DO - 10.5220/0004699103450350