Ontology-based Representation of Time Dependent Uncertainty Information for Parametric Product Data Models

Maximilian Zocholl, Reiner Anderl

2014

Abstract

The lack of information about uncertain conditions in manufacturing and the behaviour of load carrying systems still lead to fatal design decisions. Semantic technologies provide the necessary capabilities to link information from different domains along the product lifecycle and enable engineers to cope with uncertainty. This paper presents an overview of existing literature in the fields of semantics in CAD and PLM. We identify future research challenges and present our concept for the integration of uncertainty information in parametric CAD models.

References

  1. Abdul-Ghafour, S., Ghodous, P., & Shariat, B. (2012). IEEE IRI. Integration of Product Models by Ontology Development (pp. 548-555). Las Vegas, Nevada, USA: IEEE.
  2. Alani, L. I. (2007). Template-basierte Erfassung von Produktanforderungen in einem CAD System. Berlin: Technische Universität Berlin.
  3. Altidor, J., Wileden, J., McPherson, J., Grosse, I., Krishnamurty, S., Cordeiro, F., et al. (2011). A Programming language Approach to Parametric CAD Data Exchange. Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conferences, pp. 779-791.
  4. Anderl, R., & Mendgen, R. (1996). Modelling with constraints: theoretical foundation and application. Computer-Aided Design (Vol.28 No.3), pp. 155-168.
  5. Anderl, R., Maurer, M., Rollmann, T., & Sprenger, A. (2013). Representation, Presentation and Visualization of Uncertainty. CIRP Design 2012 - Sustainable Product Design -, pp. 257-266.
  6. Andersen, O., & Vasilakis, G. (2007). Building an Ontology of CAD Model Information. In K.-A. L. G. Heasle, Geometric Modelling, Numerical Simulation, and Optimization: Applied Mathematics at SINTEF (pp. 11-40). Springer.
  7. Dartigues, C., Ghodous, P., Gruninger, M., Pallez, D., & Sriram, R. (2007). CAD/CAPP Integration using Feature Ontology. Concurrent Engineering: Research and Applications, pp. 237-249.
  8. Ding, L.-J. S. (2010). Ontology-based Semantic Interoperability among Heterogeneous CAD Systems. Information Technology Journal, pp. 1635-1640.
  9. Engelhardt, R., Koenen, J., Enss, G., Sichau, A., Platz, R., Kloberdanz, H., et al. (2010). Proceedings of the 1st International Conference on Modeling and Management of Engineering Processes. A Model to Categorize Uncertainty in Load-Carrying Systems. Springer.
  10. Franke, M., Klein, P., Schröder, L., & Thoben, K.-D. (2011). Ontological Semantics of Standards and PLM Repositories in the Product Development Phase. Global Product Development, pp. 473-482.
  11. Hughes, T., Cottrell, J., & Bazilevs, Y. (2005, Vol. 194). Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement. Computer Methods in Applied Mechanics and Engineering, pp. 4135-4195.
  12. Kuhn, O., Dusch, T., Ghodous, P., & Collet, P. (2012). Framework for the support of knowledge-based engineering template update. Computers in Industry (Vol. 63), pp. 423-432.
  13. L. Mosch, A. S. (2011). Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conferences. Consideration of Uncertainty in Virtual Product Design. Washington, DC, USA: ASME.
  14. Lee, Y., Cheon, S., & Han, S. (2005). Enhancement of CAD Model Interoperability based on Feature Ontology. SOTECH, pp. 33-42.
  15. Matsokis, A., & Kiritsis, D. (2011). Ontology applications in PLM. International Journal of Product Lifecycle Management (Vol.5, No.1), pp. 84-97.
  16. Ramya T. Chaparala, N. W. (2013). Examining CAD Interoperability through the Use of Ontologies. Computer-Aided Design And Applications, pp. 83-96.
  17. Song, I., & Han, S. (2010). Parametric CAD Data Exchange Using Geometry-Based Neutral Macro File. Cooperaative Design, Visualization, and Engineering(Vol. 6240), pp. 145-152.
  18. Sprenger, A. (2013). Kollaboratives, ontologiebasiertes System zur Integration von unsicherheitsbehafteten Prozesseigenschaften in die Produktentwicklung. Shaker.
  19. Sudarsan, R., Fenves, S., Sriram, R., & Wang, F. (2005). A Product Information Modeling Framework for Product Lifecycle Management. Computer-Aided Design (Vol. 37), pp. 1399-1411.
  20. Tessier, S., & Wang, Y. (2013). Ontology-based feature mapping and verification between CAD systems. Advanded Engineering Informatics, pp. 76-92.
  21. Verhagen, W., Bermell-Garcia, P., van Dijk, R., & Curran, R. (2012). A critical review of Knowledge-Based Engineering: An identification of research challenges. Advanced Engineering Informatics (Vol.26), pp. 5-15.
  22. Young, R., Gunendran, A., Cutting-Decelle, A., & Gruninger, M. (2007). Manufacturing knowledge sharing in PLM: a progression towards the use of heavy weight ontologies. International Journal of Production Research (Vol.45, No.7), pp. 1505-1519.
  23. Zhan, P., Jayaram, U., Kim, O., & Zhu, L. (2010). Knowledge Representation and ontology Mapping Methods for Product Data in Engineering Applications. Journal of Computing and Information Science in Engineering (Vol.10, No.2), pp. 1-11.
  24. Zhong, Y., Qin, Y., Huang, M., Lu, W., & Chang, L. (2014). Constructing a meta-model for assembly tolerance types with a description logic based approach. Computer-Aided Design (Vol.48), pp. 1-16.
  25. Zhu, H., Wu, D., & Fan, X. (2010). Assembly semantics modeling for assembling process planning in virtual environment. Assembly Automation (Vol.30, No.3), pp. 257-267.
Download


Paper Citation


in Harvard Style

Zocholl M. and Anderl R. (2014). Ontology-based Representation of Time Dependent Uncertainty Information for Parametric Product Data Models . In Proceedings of the International Conference on Knowledge Management and Information Sharing - Volume 1: KMIS, (IC3K 2014) ISBN 978-989-758-050-5, pages 400-404. DOI: 10.5220/0005158004000404


in Bibtex Style

@conference{kmis14,
author={Maximilian Zocholl and Reiner Anderl},
title={Ontology-based Representation of Time Dependent Uncertainty Information for Parametric Product Data Models},
booktitle={Proceedings of the International Conference on Knowledge Management and Information Sharing - Volume 1: KMIS, (IC3K 2014)},
year={2014},
pages={400-404},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005158004000404},
isbn={978-989-758-050-5},
}


in EndNote Style

TY - CONF
JO - Proceedings of the International Conference on Knowledge Management and Information Sharing - Volume 1: KMIS, (IC3K 2014)
TI - Ontology-based Representation of Time Dependent Uncertainty Information for Parametric Product Data Models
SN - 978-989-758-050-5
AU - Zocholl M.
AU - Anderl R.
PY - 2014
SP - 400
EP - 404
DO - 10.5220/0005158004000404