Integrated Operations Planning for a Multicomponent Machine Subjected to Stochastic Environment

Jean-Baptiste Ringard, Bhushan S. Purohit, Bhupesh Kumar Lad

Abstract

Operations management decisions related to production, maintenance, inventory and supplier selection has attracted researchers since long. Traditionally each of these areas was planned and optimized individually. Soon interdependencies between these elements of value chain were realized, which prompted researchers towards integrated planning of these functions. Superiority of integrated approach over conventional operations management approaches has already been demonstrated in past. Therefore, models integrating shop floor functions like production planning, maintenance planning and inventory planning are abundant in recent literature. However, there exist functions which significantly contribute towards operations planning, but have still not been considered for integration. One such important area is procurement planning (supplier order allocation).Current work aims to integrate procurement decisions with maintenance and production plan so as to minimize Total Cost of Operations (TCO). It considers a stochastic environment where production and maintenance processes are imperfect and where there is significant dubiety related to demand and supply of material. Further, present model considers uncertainties in parameters like supplier quality, machine yield etc., by using appropriate probability distributions for these parameters. Therefore a simulation based Genetic Algorithm (GA) approach is used to solve this optimization problem. The final results are illustrated in the form of an integrated operations plan. It explicitly communicates (i) Order quantity for individual suppliers (ii) Job production sequence (iii) Production lot size (iv) Preventive maintenance schedule for individual machine components. Current work aims to contribute towards development of a paradigm where multiple disjoint functions are integrated at planning level itself.

References

  1. Jones, A., Rabelo, L. C., & Sharawi, A. T., 1999. Survey of job shop scheduling techniques. Wiley Encyclopedia of Electrical and Electronics Engineering.
  2. Chan, H. K., Chung, S. H., & Lim, M. K., 2013. Recent research trend of economic-lot scheduling problems. Journal of Manufacturing Technology Management, 24(3), 465-482.
  3. Adamu, M. O., & Adewumi, A. O., 2014. A survey of single machine scheduling to minimize weighted number of tardy jobs. Journal of Industrial and Management Optimization, 10(1), 219-241.
  4. Mula, J., Poler, R., Garcia-Sabater, J. P., & Lario, F. C., 2006. Models for production planning under uncertainty: A review. International journal of production economics, 103(1), 271-285.
  5. Sharma, A., Yadava, G. S., & Deshmukh, S. G., 2011. A literature review and future perspectives on maintenance optimization. Journal of Quality in Maintenance Engineering, 17(1), 5-25.
  6. Kumar, U., Galar, D., Parida, A., Stenström, C., & Berges, L., 2013. Maintenance performance metrics: a stateof-the-art review. Journal of Quality in Maintenance Engineering, 19(3), 233-277.
  7. Garg, A., & Deshmukh, S. G., 2006. Maintenance management: literature review and directions. Journal of Quality in Maintenance Engineering, 12(3), 205- 238.
  8. Wilson, E. J., 1994. The relative importance of supplier selection criteria: a review and update. International Journal of Purchasing and Materials Management, 30(2), 34-41.
  9. Aissaoui, N., Haouari, M., & Hassini, E., 2007. Supplier selection and order lot sizing modeling: A review. Computers & operations research, 34(12), 3516-3540.
  10. Hadidi, L. A., Al-Turki, U. M., & Rahim, A., 2012. Integrated models in production planning and scheduling, maintenance and quality: a review. International Journal of Industrial and Systems Engineering, 10(1), 21-50.
  11. Zhao, S., Wang, L., & Zheng, Y., 2014. Integrating production planning and maintenance: an iterative method. Industrial Management & Data Systems, 114(2), 162-182.
  12. Alfares, H. K., Khursheed, S. N., & Noman, S. M., 2005. Integrating quality and maintenance decisions in a production-inventory model for deteriorating items. International Journal of Production Research, 43(5), 899-911.
  13. Peters, M., Schneider, H. & Tang, K., 1988. 'Joint determination of optimal inventory and quality control policy', Management Science, Vol. 34, No. 8, pp. 991-1004.
  14. Lad, Bhupesh Kumar, & Makarand S. Kulkarni, 2012. Optimal Maintenance Schedule Decisions for Machine Tools Considering the User's Cost Structure, International Journal of Production Research 50, no. 20: 5859-5871.
Download


Paper Citation


in Harvard Style

Ringard J., Purohit B. and Kumar Lad B. (2015). Integrated Operations Planning for a Multicomponent Machine Subjected to Stochastic Environment . In Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH, ISBN 978-989-758-120-5, pages 55-62. DOI: 10.5220/0005496500550062


in Bibtex Style

@conference{simultech15,
author={Jean-Baptiste Ringard and Bhushan S. Purohit and Bhupesh Kumar Lad},
title={Integrated Operations Planning for a Multicomponent Machine Subjected to Stochastic Environment},
booktitle={Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH,},
year={2015},
pages={55-62},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005496500550062},
isbn={978-989-758-120-5},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH,
TI - Integrated Operations Planning for a Multicomponent Machine Subjected to Stochastic Environment
SN - 978-989-758-120-5
AU - Ringard J.
AU - Purohit B.
AU - Kumar Lad B.
PY - 2015
SP - 55
EP - 62
DO - 10.5220/0005496500550062