# Application of 3D Navier-Stokes Equations and Mathematical Optimization Techniques to Improve the Efficiency of Seven-Stage Axial Compressor

### Oleg V. Baturin, Grigorii M. Popov, Evgeny S. Goryachkin, Yilia D. Novikova

#### Abstract

The paper presents the results of an optimization of the high-pressure compressor of the engine NK-36ST using the mathematical optimization techniques. The article describes in detail the search algorithm of the optimal form of the compressor blades using the software package Numeca and software package IOSO. The description of the used numerical model is given, its verification was carried out. It is shown that only by correcting the stagger angles of the blade rows the efficiency of the considered compressor can be increased by 1.5% at the current position of the working point on the characteristic of the compressor. Also the search possibility of compromise solution that provides a simultaneous increase in the efficiency of the compressor in two modes is shown.

#### References

- Kulagin, V., 2002. The theory, calculation and design of aircraft engines and power plants Fundamentals of the theory of the CCD. Workflow and thermodynamic analysis, Mashinostroenie, Moskow.
- Kuzmichev, V., Rybakov, V., Tkacheno, A., Krupenich, I., 2014. Optimization of working process parameters of gas turbine engines line on the basis of unified engine core. In ARPN Journal of Engineering and Applied Sciences, vol. 9, pp 1873-1878.
- Shablii, L., Dmitrieva, I., 2014. Blade geometry transformation in optimization problems from the point cloud to the parametric form. In Russian Aeronautics, vol. no 3, pp. 276-282.
- Matveev, V., Popov, G., Goryachkin, E., Smirnova, Y., 2014. Effect of Accounting of Air Bleed from the Flow Passage of the Multi-Stage Axial Low Pressure Compressor on its Design Performances. In Research Journal of Applied Sciences, vol. 9, no. 11, pp. 784- 788.
- Egorov, I., Kretinin, G, Leshchenko, I., Kuptzov, S., 2002. Optimisation Toolkit - Novel Software to Create Better Design. In Proc. of 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimisation.

#### Paper Citation

#### in Harvard Style

V. Baturin O., M. Popov G., S. Goryachkin E. and D. Novikova Y. (2015). **Application of 3D Navier-Stokes Equations and Mathematical Optimization Techniques to Improve the Efficiency of Seven-Stage Axial Compressor** . In *Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH,* ISBN 978-989-758-120-5, pages 227-232. DOI: 10.5220/0005570302270232

#### in Bibtex Style

@conference{simultech15,

author={Oleg V. Baturin and Grigorii M. Popov and Evgeny S. Goryachkin and Yilia D. Novikova},

title={Application of 3D Navier-Stokes Equations and Mathematical Optimization Techniques to Improve the Efficiency of Seven-Stage Axial Compressor},

booktitle={Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH,},

year={2015},

pages={227-232},

publisher={SciTePress},

organization={INSTICC},

doi={10.5220/0005570302270232},

isbn={978-989-758-120-5},

}

#### in EndNote Style

TY - CONF

JO - Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH,

TI - Application of 3D Navier-Stokes Equations and Mathematical Optimization Techniques to Improve the Efficiency of Seven-Stage Axial Compressor

SN - 978-989-758-120-5

AU - V. Baturin O.

AU - M. Popov G.

AU - S. Goryachkin E.

AU - D. Novikova Y.

PY - 2015

SP - 227

EP - 232

DO - 10.5220/0005570302270232