A NEW DEVELOPMENT DESIGN CAE EMPLOYMENT MODEL - Applying Numerical Simulation to Automobile Bottleneck Technology

Kakuro Amasaka

2011

Abstract

With the rapid move towards global production, it has become increasingly critical for manufacturers to drastically cut back on the time it takes to move a product from design to production while ensuring quality. This research addresses the necessity reforming the business processes associated with development design in particular, proposing a “New Development Design CAE Employment Model” using four core models: the “Highly Reliable CAE Analysis Technology Component Model”, the “Highly Precise CAE Analysis Model”, the “Total QA High Cyclization Business Process Model”, and the “Intellectual Customer Data Collection/Analysis Integrated Model” that takes manufacturers away from conventional preproduction and prototype testing methods and towards a better predictive evaluation method. The effectiveness of the model is verified by successfully applying it to the technological problem “automotive transaxle oil seal leakage” of development design bottlenecks at auto manufacturers.

References

  1. Amasaka, K., 2004, Science SQC, New Quality Control Principle - The Quality Control of Toyota, Springer.
  2. Amasaka, K., 2005a, Constructing a Customer Science Application System “CS-CIANS”, WSEAS Transactions on Business and Economics, Issue 3, Vol. 2, pp. 135-142.
  3. Amasaka, K.,, 2005b, Interim Report of WG4's studies in JSQC Research on Simulation and SQC(1)-A Study of the High Quality Assurance CAE Model for Car Development Design,, 1st Technical Conference Nagano, Japan, pp. 93-98.
  4. Amasaka, K., 2007, Highly Reliable CAE Model, The Key to Strategic Development of Advanced TDS, Journal of Advanced Manufacturing Systems, Vol. 6, No. 2, pp. 159-176.
  5. Amasaka, K., 2008, An Integrated Intelligence Development Design CAE Model Utilizing New JIT, Journal of Advanced Manufacturing Systems, Vol. 7, No. 2, pp. 221-241.
  6. Amasaka. K., 2010a. Chapter 4.Product Design, Quality Assurance Guidebook, New ed,. JSOC, pp. 87-101.
  7. Amasaka, K., 2010b, Proposal and Effectiveness of a High Quality Assurance CAE Analysis Model, Current Development in Theory and Applications of Computer Science, Engineering and Technology, Vol. 2, No. 1/2, August/November Issue, pp. 23-48.
  8. Amasaka, K., (Ed), 2007a, Establishment of a Needed Design Quality Assurance Framework for Numerical Simulation in Automobile Production, Working Group No. 4 Studies in JSQC.
  9. Amasaka, K., (Ed)., 2007b, New Japan Model - Science TQM, Study Group on the Ideal Situation of Quality Management in the Manufacturing Industry, Maruzen.
  10. Ito, T., Sato, M., Yamaji, M., and Amasaka, K., 2010a, An Analysis of Bottleneck Technology by Using Experiments and CAE, International Business & Economics Research Journal, Vol. 9, No. 12, pp. 123- 129.
  11. Ito, T., Matsuura, S., and Amasaka, K., 2010b, Optimized Design using High Quality Assurance CAE, The Japanese Society for Quality Control, The 40th Annual Technical Conference, Seijyo University, Japan, pp.189-192.
  12. Dong, Y, Fan, X,, and Liu, B., 2011, Numerical Simulation and Technology Optimization of Rear Oil Seal Bearing Die Casting Based on ProCast, Advanced Materials Research, Volx, 89-193, pp. 189- 193.
  13. Leo, J. D. V., Annos, N., and Oscarsson, 2004, Simulation Based Decision Support for Manufacturing System Life Cycle Management, Journal of Advanced Manufacturing Systems, Vol. 3, No. 2, pp. 115-128.
  14. Kameike, M., Ono, S., and Nakamura, K., 2000, The Helical Seal: Sealing Concept and Rib Design Sealing Technology, International 77 pp. 7-11.
  15. Kume, H., 1999, Quality Management in Design Development, JUSE.
  16. Lopez, A.M., Nakamura, K., and Seki, K., 1997, A Study on the Sealing Characteristics of lip Seals with Helical Ribs, in Proc. 15th Int. Conf. British Hydromechanics Research Group Ltd Fluid Sealing, pp. 1-11.
  17. Magoshi, Y, Fujisawa, H., and Sugiura,.T., 2003, Simulation Technology Applied to Vehicle Development, Journal of Society of Automotive Engineers of Japan, Vol. 53, No. 3, pp. 95-100.
  18. Sato, Y., Toda, A., Ono, S., Nakamura, K., 1999, A Study of the Sealing Mechanism of Radial Lip Seal with Helical Robs-Measurement of the Lubricant
  19. Fluid Behavior under Sealing Contact, SAE Technical Paper Series, 1999-01-0878.
  20. Yamada, H., and Amasaka, K., 2011, Highly Reliable CAE Analysis Approach- Application in Automotive Bolt Analysis, China-USA Business Review, Vol. 10, No. 3, pp. 199- 205.
Download


Paper Citation


in Harvard Style

Amasaka K. (2011). A NEW DEVELOPMENT DESIGN CAE EMPLOYMENT MODEL - Applying Numerical Simulation to Automobile Bottleneck Technology . In Proceedings of the International Conference on Evolutionary Computation Theory and Applications - Volume 1: ECTA, (IJCCI 2011) ISBN 978-989-8425-83-6, pages 114-124. DOI: 10.5220/0003637201140124


in Bibtex Style

@conference{ecta11,
author={Kakuro Amasaka},
title={A NEW DEVELOPMENT DESIGN CAE EMPLOYMENT MODEL - Applying Numerical Simulation to Automobile Bottleneck Technology},
booktitle={Proceedings of the International Conference on Evolutionary Computation Theory and Applications - Volume 1: ECTA, (IJCCI 2011)},
year={2011},
pages={114-124},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0003637201140124},
isbn={978-989-8425-83-6},
}


in EndNote Style

TY - CONF
JO - Proceedings of the International Conference on Evolutionary Computation Theory and Applications - Volume 1: ECTA, (IJCCI 2011)
TI - A NEW DEVELOPMENT DESIGN CAE EMPLOYMENT MODEL - Applying Numerical Simulation to Automobile Bottleneck Technology
SN - 978-989-8425-83-6
AU - Amasaka K.
PY - 2011
SP - 114
EP - 124
DO - 10.5220/0003637201140124