MODULAR DESIGN FOR SPACE ENGINEERING RESEARCH PLATFORMS

Mark Post, Regina Lee, Brendan Quine

2011

Abstract

In this paper, we describe a modular design approach that is used in developing several research platforms for space engineering research at York University. We briefly describe three distinct research projects for space science and engineering research: a 6kg micro-rover under development for the Northern Light mars lander mission, a 50kg rover built by the York University Rover Team to compete in the annual University Rover Challenge, and a 1U CubeSat design for nanosatellite technology development research. All three research projects share a design philosophy to achieve modularity, efficiency, robustness and simplicity by adopting a common embedded hardware configuration using COTS hardware and a simple control topology. An on-board computer board stack based on a PC/104 or similar form-factor provides centralized control using an ARM microcontroller. Payloads and application-specific components are added using robust SPI, synchronous serial, and RS-485 interfaces, with provision made for ethernet and USB connectivity when needed. The software for this system is is based on open-source compilers and operating systems and is also modular in nature, using a portable base station GUI, wireless mesh networking between different systems, and JAUS messaging for flexible component-level communications. The proposed design approach allows sharing of resources while optimizing design features with cost-effective, readily-available commercial components for complex research projects.

References

  1. Candini, G. P., Paolini, E., and Piergentili, F. (2009). Design and manufacture of a low cost educational hexapod rover. Acta Astronautica, 65(3-4):525 - 536.
  2. Cho, A., Kim, J., Lee, S., Choi, S., Lee, B., Kim, B., Park, N., Kim, D., and Kee, C. (2007). Fully automatic taxiing, takeoff and landing of a uav using a singleantenna gps receiver only. In Control, Automation and Systems, 2007. ICCAS 7807. International Conference, pages 821 -825.
  3. Farokh Irom, D. N. N. (2008). Radiation tests of highly scaled high density commercial nonvolatile flash memories. Technical report, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA.
  4. Lee, J., Choi, J., Chung, J., and Lim, J. (2003). Design and implementation of integrated drive circuit for a small bldc motor. In Electrical Machines and Systems, 2003. ICEMS 2003. Sixth International Conference, volume 2, pages 491 - 494 vol.2.
  5. Marosy, G., Kovacs, Z., and Horvath, G. (2009). Effective mars rover platform design with hardware / software co-design. In Design and Diagnostics of Electronic Circuits Systems, 2009. DDECS 7809, pages 148 -151.
  6. Navarathinam, N., Lee, R., and Chesser, H. (2011). Characterization of lithium-polymer batteries for cubesat applications. Acta Astronautica, 68(11-12):1752 - 1760.
  7. Post, M. and Lee, R. (2011). Lessons learned from the york university rover team (yurt) at the university rover challenge 2008-2009. Acta Astronautica, 68(7- 8):1343 - 1352.
  8. Quine, B., Lee, R., and Roberts, C. (2008). Northern light - a canadian mars lander development plan. In Conference Proceedings of CASI ASTRO 2008, Montreal, Canada.
  9. Sarda, K. and C., G. (2010). Canadian advanced nanospace experiment 2 on-orbit operations; two years of pushing the nanosatellite performance envelope. In Conference Proceedings of CASI ASTRO 2010, Toronto, Canada.
  10. Torre, A. D., Finzi, A. E., Genta, G., Curti, F., Schirone, L., Capuano, G., Sacchetti, A., Vukman, I., Mailland, F., Monchieri, E., Guidi, A., Trucco, R., Musso, I., and Lombardi, C. (2010). Amalia mission lunar rover-the conceptual design of the team italia rover, candidate for the google lunar x prize challenge. Acta Astronautica, 67(7-8):961 - 978.
  11. Zerigui, A., Wu, X., quan Deng, Z., and Yu, K. (2007). Common hardware design for (2n+2, 0*n*3) wheels mobile rover. In Robotics and Biomimetics, 2007. ROBIO 2007, pages 712 -716.
Download


Paper Citation


in Harvard Style

Post M., Lee R. and Quine B. (2011). MODULAR DESIGN FOR SPACE ENGINEERING RESEARCH PLATFORMS . In Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics - Volume 2: MORAS, (ICINCO 2011) ISBN 978-989-8425-75-1, pages 427-436. DOI: 10.5220/0003649804270436


in Bibtex Style

@conference{moras11,
author={Mark Post and Regina Lee and Brendan Quine},
title={MODULAR DESIGN FOR SPACE ENGINEERING RESEARCH PLATFORMS},
booktitle={Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics - Volume 2: MORAS, (ICINCO 2011)},
year={2011},
pages={427-436},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0003649804270436},
isbn={978-989-8425-75-1},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics - Volume 2: MORAS, (ICINCO 2011)
TI - MODULAR DESIGN FOR SPACE ENGINEERING RESEARCH PLATFORMS
SN - 978-989-8425-75-1
AU - Post M.
AU - Lee R.
AU - Quine B.
PY - 2011
SP - 427
EP - 436
DO - 10.5220/0003649804270436