Novel Virtual Training System to Learn the Sway Suppression of Rotary Crane by Presenting Ideal Operation of Joystick or Visual Information

Tsuyoshi Sasaki, Shoma Fushimi, Yong Jian Nyioh, Kazuhiko Terashima

2013

Abstract

In this paper, we propose a novel virtual training system capable of shortening the training period of unskilled crane operators. First, a simulator representing the motion behavior of load and boom during transfer operation in crane’s cockpit is newly built. Second, referring to such the sway suppression skill taught in crane driving school, sway suppression control input is theoretically derived. Thirdly, a learning support method with ideal operation of joystick or visual sensory information to facilitate acquisition of the sway-suppression skill for unskilled operators is proposed. Finally, a lot of experiments were performed to validate the effectiveness of the proposed learning support method.

References

  1. Jiung, Y., Huang, Chung, Yun, G., 2003. Modelling and Designing a Low-Cost Hight-Fidelity Mobile Crane Simulator, Int. Journal of Human-Computer Studies, Vol.58, No.2, pp.151-176.
  2. Mohammed, F., Daqaq, Ali, H., Nayfeh, 2003. Virtual Reality Simulation of Ships and Ship-Mounted Cranes, Master thesis, Virginia Polytechnic Institude and State University.
  3. T., Iwasa, K., Terashima, N.Y. Jian, Y., Noda, 2010. Operator Assistance System of Rotary Crane by Gainscheduled H-inf Controller with Reference Governor, 2010 IEEE International Conference on Control Applications (CCA), Yokohama, Japan, September 8- 10, [1325-1330].
  4. N., Yong, Jian, Y., Noda, K., Terashima, 2011. Simulator Building for Agile Control Design of Shipboard Crane and its application to Operational Training, 18th World Congress of the International Federation of Automatic Control (IFAC), Universita Cattolica del Sacro Cuore, Milano.
  5. Y., Shen, K., Terashima, K., Yano, 2003. Optimal Control of Rotary Crane Using Straight Transfer Transformation Method to Eliminate residual Vibration, Trans. of the Society of Instrument and Control Engineers, vol.39, No.8, [817-826].
  6. Jason, Lawrence, William, Singhose, 2010. Command Shaping Slewing Motions for Tower Crane, Journal of Vibration and Acoustics, Vol. 132, No.1.
  7. David Feygin, Madeleine Keehner, Frank Tendick, 2002. Haptic Guidance: Experimental Evaluation of a Haptic Training Mathod for a Perceptual Motor Skill, Proceeding of the 10th Int. Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp,40-47.
  8. Dan Morris, Hong Tan, Federico Barbagli, Timothy Chang, Kenneth Salisbury, 2007. Haptic Feedback Enhances Force Skill Learning, Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp.21-26.
  9. M. Al-Hussein, M.A. Niaz, H. Yu, H. Kim, 2006. Integrating 3D visualization and simulationnext term for tower previous termcranenext term operations on construction sites, Automation in Construction, Vol. 15, no. 5, pp. 554-562.
  10. A. Khalid, J. Huey, W. Singhose, J. Lawrance, D. Frakes, 2006. Human Operator Performance Testing Using an Input-Shaped Bridge Crane", Journal of Dynamic Systems Measurement and Control, Vol.128, No.4, pp.835-841.
  11. R. B. Gillespie, S.O'Modhrain, P.Tang, C.Pham, D.Zaretsky, 1998. The Virtual Teacher, ASME International Mechanical Engineering Conference and Exposition.
  12. J.Bluteau, S.Coquillart, Y.Payan, E.Gentaz, 2008. Haptic guidance improves the visuo-manual tracking of trajectories, PLos ONE 3, Vol.3.
  13. D. Feygin, M. Keehner, F. Tendick, 2002. Haptic Guidance: Experimental evaluation of a haptic training method for a perceptual motor skill, Proceedings of the 10th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp. 40-47.
  14. K. Terashima, Y. Shen, K. Yano, 2007. Modeling and optimal control of a rotary crane using the straight transfer transformation method, Int. J. of Control Engineering Practice 15, Elsevier, pp. 1179-1192.
  15. Y. Shen, K. Terashima, K. Yano, 2004. Minimum time control of a rotary crane using straight transfer transformation method, Transactions of the Society of Instrument and Control Engineers, Vol. 3, No. 10, pp. 70-79.
  16. Y. Shen, K. Terashima, K. Yano, 2001. Starting control with vibration damping by hybrid shaped approach considering time and frequency specifications, Transactions of the Society of Instrument and Control Engineers, Vol. 137, pp. 403-410.
Download


Paper Citation


in Harvard Style

Sasaki T., Fushimi S., Jian Nyioh Y. and Terashima K. (2013). Novel Virtual Training System to Learn the Sway Suppression of Rotary Crane by Presenting Ideal Operation of Joystick or Visual Information . In Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO, ISBN 978-989-8565-71-6, pages 58-65. DOI: 10.5220/0004444500580065


in Bibtex Style

@conference{icinco13,
author={Tsuyoshi Sasaki and Shoma Fushimi and Yong Jian Nyioh and Kazuhiko Terashima},
title={Novel Virtual Training System to Learn the Sway Suppression of Rotary Crane by Presenting Ideal Operation of Joystick or Visual Information},
booktitle={Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,},
year={2013},
pages={58-65},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0004444500580065},
isbn={978-989-8565-71-6},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,
TI - Novel Virtual Training System to Learn the Sway Suppression of Rotary Crane by Presenting Ideal Operation of Joystick or Visual Information
SN - 978-989-8565-71-6
AU - Sasaki T.
AU - Fushimi S.
AU - Jian Nyioh Y.
AU - Terashima K.
PY - 2013
SP - 58
EP - 65
DO - 10.5220/0004444500580065