Biomechanical Analysis of Orthodontic Appliances Through 3D Computer Aided Engineering

Roberto Savignano

2014

Abstract

In the field of dental health care, misaligned teeth can cause aesthetic and functional problems for the patients. Different appliances have been developed to correct malocclusions. In the last decades research in the orthodontic field has focused not only on the effectiveness of the appliances on correcting teeth position, but also on the fulfilment of comfort issues during the treatment. For this reason, many new orthodontic appliances have been developed with the aim at being minimally invasive for the patients. In particular clear removable aligners, made of transparent thermoplastic material and then almost invisible, raised a growing interest. Treatments based on clear aligners are composed of a set of thermoformed templates, having different shapes, which are sequentially worn by the patient. Each aligner is shaped a bit different than the real teeth position in the mouth in order to force teeth to move in the correct position. Even if orthodontic treatments based on the use of clear aligners are commonly used in clinical practice there is no technical literature describing how the loads are transferred from the aligner to the teeth. Since both design and production processes involves many clinical and technological skills, the optimisation of aligners features represents one of the most challenging aspects of this kind of orthodontic treatments. In this context, the present research project is focused on the development of a Finite Element Method (FEM) model to be used in the optimisation process of both geometrical and structural attributes of removable aligners.

References

  1. Barbagallo, L., Shen, G., Jones, A., Swain, M., Petocz, P., & Darendeliler, M. (2008). A novel pressure film approach for determining the force imparted by clear removable thermoplastic appliances. Annals of Biomedical Engineering , 335-341.
  2. Barone, S., Paoli, A., & Razionale, A. (2013b). Computeraided modelling of three-dimensional maxillofacial tissues through multi-modal imaging. Proceedings of the Institution of Mechanical Engineers, PArt H: Journal of Engineering in Medicine , 227,89-104.
  3. Barone, S., Paoli, A., & Razionale, A. (2013a). Creation of 3D Multi-Body Orthodontic Models by Using Independent Imaging Sensors. Sensors , 13,2033- 2050.
  4. Beers, A., Choi, W., & Pavlovskaia, E. (2003). Computerassisted treatment planning and analysis. Orthodontics & craniofacial research , 117-125.
  5. Field, C., Ichim, I., Swain, M., Chan, E., Darendeliler, M., Li, W., et al. (2009). Mechanical responses to orthodontic loading: A 3-dimensional finite element multi-tooth model. American Journal of Orthodontics and Dentofacial Orthopedics , 174-181.
  6. Fill, T. S., Toogood, R. W., Major, P. W., & Carey, J. P. (2012). Analytically determined mechanical properties of, and models for the. Journal of Biomechanics , 9- 16.
  7. Hahn, W., Engelke, B., Jung, K., Dathe, H., Fialka-Fricke, J., Kubein-Meesenburg, D., et al. (2010). Initial forces and moments delivered by removable thermoplastic appliances during rotation of an upper central incisor. Angle Orthodontist , 80,2,239-246.
  8. Kesling, H. (1943). The philosophy of the tooth positioning appliance. American Journal of Orthodontics and Oral Surgery , 297-304.
  9. Kohda, N., Iijima, M., Muguruma, T., Brantley, W., Ahluwalia, K., & Mizoguchi, I. (2013). Effects of mechanical properties of thermoplastic materials on the initial force of thermoplastic appliances. Angle Orthodontist , 476-483.
  10. Martorelli, M., Gerbino, S., Giudice, M., & Ausiello, P. (2013). A comparison between customized clear and removable orthodontic appliances manufactured using RP and CNC techniques. Dental Materials , e1-e10.
  11. Natali, A., Pavan, P., & Scarpa, C. (2004). Numerical analysis of tooth mobility: Formulation of a non-linear constitutive law for the periodontal ligament. Dental Materials , 623-629.
  12. Penedo, N., Elias, C., Pacheco, M., & de GouvĂȘa, J. (2010). 3D simulation of orthodontic tooth movement. Dental Press Journal of Orthodontics , 98-108.
  13. Qian, Y., Fan, Y., Liu, Z., & Zhang, M. (2008). Numerical simulation of tooth movement in a therapy period. Clinical Biomechanics , s48-s52.
  14. Ryokawa, H., Miyazaki, Y., Fujishima, A., & Maki, K. (2006). The mechanical properties of dental thermoplastic materials in a simulated intraoral environment. Orthodontic Waves , 64-72.
  15. Su, M., Chang, H., Chiang, Y., Cheng, J., Fuh, L., Wang, C., et al. (2013). Modeling viscoelastic behavior of periodontal ligament with nonlinear finite element analysis. Journal of Dental Sciences , 8,2,121-128.
Download


Paper Citation


in Harvard Style

Savignano R. (2014). Biomechanical Analysis of Orthodontic Appliances Through 3D Computer Aided Engineering . In Doctoral Consortium - DCBIOSTEC, (BIOSTEC 2014) ISBN Not Available, pages 28-35


in Bibtex Style

@conference{dcbiostec14,
author={Roberto Savignano},
title={Biomechanical Analysis of Orthodontic Appliances Through 3D Computer Aided Engineering},
booktitle={Doctoral Consortium - DCBIOSTEC, (BIOSTEC 2014)},
year={2014},
pages={28-35},
publisher={SciTePress},
organization={INSTICC},
doi={},
isbn={Not Available},
}


in EndNote Style

TY - CONF
JO - Doctoral Consortium - DCBIOSTEC, (BIOSTEC 2014)
TI - Biomechanical Analysis of Orthodontic Appliances Through 3D Computer Aided Engineering
SN - Not Available
AU - Savignano R.
PY - 2014
SP - 28
EP - 35
DO -