A Study on Procurement Management of China Power Enterprises
based on the Concept of Life-cycle Management
Yong Zhang
1
and Jianjun Wang
2
1
Dept. of Corporate Management Consulting, State Grid Energy Research Institute, Beijing, 102209, China
2
Policy Research Department, China Banking Regulatory Commission, Beijing, China
zhangyong@sgeri.sgcc.com.cn, asterwjj@163.com
Keywords: Procurement Management, Life-cycle Management, Power Enterprises.
Abstract: Power enterprises are typical asset-intensive businesses. Power equipments have long operating cycle, and
the health level of single equipment will seriously affect the safe and stable operation of the whole power
system. Chinese power enterprises attach great importance to power enterprise equipment procurement and
adopted a series of measures to improve the level of equipment procurement. However, due to the influence
of traditional management concepts, there are some gaps between Chinese power enterprises and the world's
most advanced enterprises in the overall strategy of equipment procurement, vendor management and asset
life cycle management. This paper diagnoses the device management situation of Chinese power
enterprises, finds problems in management practice and relative recommendations for improvement are put
forward.
1 INTRODUCTION
Power enterprises are typical asset-intensive
businesses. Power equipment has long operating
cycle, and the health level of single equipment will
seriously affect the safe and stable operation of the
whole power system. China power enterprises attach
great importance to power enterprise equipment
procurement. In recent years China power
enterprises adopted a series of measures to improve
the level of equipment procurement. However, due
to the influence of traditional management concepts,
there are some gaps between China power
enterprises and world's most advanced enterprises in
the overall strategy of equipment procurement,
vendor management and asset life cycle
management. With the continuous expansion of the
power enterprises assets, how to improve asset
management capability has become an urgent
problem to be solved by China power enterprises.
2 A DIAGNOSIS ON
PROCUREMENT
MANAGEMENT PROBLEMS
OF POWER ENTERPRISES
2.1 Diagnostic Index System of Power
Enterprise Procurement
Management
Based on the characteristics of power enterprise
procurement management, this paper establishes a
diagnostic index system of power enterprise
procurement management (see Figure 1). This
diagnostic index system includes three analysis
dimensions.
2.2 Problems Existing in the
Procurement Management of
Power Enterprises
Using the diagnostic index system of power
enterprise procurement management, this paper
analyzes China's power enterprises and finds there
are some problems.
The first problem is, asset management strategy
needs improving.
78
78
Wang J. and Zhang Y.
A Study on Procurement Management of China Power Enterprises based on the Concept of Life-cycle Management.
DOI: 10.5220/0006019400780081
In Proceedings of the Information Science and Management Engineering III (ISME 2015), pages 78-81
ISBN: 978-989-758-163-2
Copyright
c
2015 by SCITEPRESS Science and Technology Publications, Lda. All rights reser ved
Figure 1: Diagnostic Index System of Power Enterprise
Procurement Management.
First, unified asset management philosophy is
missing. The life cycle of electrical equipments are
consists of project feasibility study, preliminary
design, bidding, equipment operation, asset
retirement. All these stages have an impact on the
healthy operation of electrical equipment assets.
Although under the current management mode, the
various stages are managed by different
departments. Different departments uphold different
management thinking and strategies, so a joint force
of asset management can’t be formed.
Second, developing equipment procurement
strategies is ignored. Business procurement mode is
closely related to many factors, such as external
policy environment for enterprise, market
environment and the company's own construction,
asset operation, etc. Once the internal and external
environment changes, companies need to assess and
adjust the existing procurement strategy timely. At
present, developing equipment procurement
strategies has not been established by majority of
China’s power enterprises. It’s hard for enterprises
to select appropriate procurement strategies in
accordance with the actual need of construction,
operation and maintenance.
Third, the existing method of bidding evaluation
doesn’t consider the asset performance throughout
the whole life cycle. At present, although power
companies take the situation of equipment operation
into account, they still take the price level as the
primary basis for purchasing decisions. From a
practical point of view, low-cost devices always
have some shortcomings, such as short maintenance
cycle, high failure rate, higher maintenance costs,
etc. It is difficult for low-cost devices to present
satisfying performance in their whole life cycle.
The second problem is, the responsibility of asset
management is not clear, and part of the
responsibility is missing.
First, the supplier management is absent.
Supplier management is an important part of
material management process, as pre-sale, sale and
after-sales stages of electric power equipment are all
in need of perfect supplier management. Currently
most electric power enterprises have not yet
established supplier evaluation system, so it is hard
to accurately evaluate vendor's comprehensive
quality of service according to the supplier's product
quality and after-sales service, and it is also hard to
use the assess results in future procurement. Second,
the operational departments and the financial sector
is still lack of effective connection in the assets
retirement. There are no clear assessment criteria
and disposal process in asset retirement
management, and retired assets cannot be disposed
in time, and the reuse of retired assets and the
recycling of asset residual are delayed.
The third problem is, asset management-related
information sharing is not implemented in a timely
manner.
First, the majority of electricity enterprises
haven’t established a unified supplier management
information system. Supplier management must be
established on the basis of accumulating large
amounts of data on supplier’s products and service.
At present, the Group's subsidiary companies have
to collect and accumulate the related data on their
own. The basic data for supplier evaluation is
inadequate, so it is difficult to provide a reference
for procurement. Second, material procurement
cannot be supported by the information from project
construction, operation and inspection, maintenance
and repair, condition assessment, technical
transformation, retirement, etc. Procurement
administration cannot grasp suppliers’ situation of
on-site service, quality and timeliness of delivery,
after-sales service. It is hard to control the service
quality of suppliers.
A Study on Procurement Management of China Power Enterprises based on the Concept of Life-cycle Management
79
A Study on Procurement Management of China Power Enterprises based on the Concept of Life-cycle Management
79
3 IMPROVEMENT
SUGGESTIONS ON ASSET
MANAGEMENT IN POWER
ENTERPRISE
3.1 Establish Unified Concept of Asset
Management, and Set up and
Improve the Management
Strategies.
First, power enterprises should carry out asset
management based on life cycle management
philosophy. The core idea of asset life cycle
management is to combine all stages of feasible
study, preliminary design, procurement, operation of
assets, asset retirement, etc. in asset management as
a whole, taking process optimization as the main
focus, using informatization as the main measure,
applying advanced decision and operation
management method such as life cycle cost (LCC)
evaluation method, condition based maintenance to
eventually realization high efficiency and low cost in
the entire life cycle of the assets.
Second, add a new stage of procurement strategy
decision to the process. Power enterprises should
create a new stage of procurement strategy
(including supplier development strategy, strategic
purchasing strategy) decision in the procurement
process according to overall demand and schedule
arrangement of the purchasing, and timely adjust the
procurement strategy according to internal and
external environment of the enterprise to ensure the
quality of the equipment under the premise to reduce
costs.
Third, establish LCC bid evaluation method
suitable to the characteristics of power equipment.
Not only the equipment purchase cost, but also the
operation and maintenance costs, failure costs and
retirement costs of equipment in its whole life cycle
are included in the calculation. And the LCC value
should be regarded as key basis of bid evaluation
decision-making to realize the optimal life cycle cost
of the equipment. In order to use LCC bid evaluation
method in bid evaluation, the following questions
should be paid attention to in the preparation of
technical specification books and commercial code
books:
a. Formulating complete procurement technical
specification standard to realize the asset life cycle
cost optimization, putting equipment operation data
under certain operating mode into the technical
standard of equipment, to provide decision-making
support of the equipment.
b. The economy of the equipment not only
reflects the investment cost, but also relates to the
reliability of the equipment to guarantee the normal
production, safety and stability, and reduce the loss
of the fault shutdown. Therefore, it is important to
determine in equipment procurement business
specification the economic characteristics of
equipment reflected by the equipment reliability
level. Using the life cycle cost method, the economic
characteristics should be converted and used in the
decision-making process of equipment procurement.
3.2 Establishing a Sound Supplier
Management Process.
First, power enterprises should add a new stage of
supplier evaluation, including supplier pre-
assessment, supplier post-evaluation and supplier
interaction management, in the procurement process
to improve procurement process. Second, power
enterprises should strengthen the horizontal
coordination between operation department and
finance department, and discuss and formulate asset
retirement evaluation criteria and the disposal
process. Once the assets retired, evaluation process
should be immediately started to timely re-
utilization and residual recovery and avoid the loss
of the residual assets value.
3.3 Accelerating the Construction of
Information Sharing Channels for
Asset Management.
First, a unified supplier management system should
be established to realize the dynamic relationship
between supplier management system and other
management information systems. The unified
supplier management system can provide timely and
accurate data support for supplier management.
a. Supplier management system and production
management system (PMS) should be linked up, so
that the supplier management module can extract the
original defects data of equipment from the
equipment standing book of PMS. At the same time,
PMS can also get the basic information of the
suppliers and equipment from the supplier
management module.
b. Supplier management system and the asset
management module should be linked up, so the
LCC calculation data in supplier management
module can be provided to the asset management
module of the ERP.
ISME 2015 - Information Science and Management Engineering III
80
ISME 2015 - International Conference on Information System and Management Engineering
80
c. Supplier management system and the material
management module should be linked up, so power
enterprises can collect information of the suppliers
and supply timeliness from the materials
management module in ERP.
Second, power enterprises should establish
information sharing channels between the
procurement process and spare parts process, so
power enterprises can get access to kinds, types,
quantity, state information of spare parts. When
making the procurement plan, fully consideration
should be paid to the assets which have been
processed as a spare part, so as to avoid waste
caused by repeat purchase.
4 CONCLUSIONS
Improvement on quality of electric power equipment
is the key to the healthy and stable operation of the
power system. Although traditional philosophy of
asset management can reduce procurement costs, a
lot of equipment operation maintenance cost,
maintenance cost and failure cost were brought
forward due to quality problems of the equipment.
Therefore, power enterprises should innovate their
management modes and carry out asset life cycle
management. Power enterprises should use
equipment’s performance in the whole life cycle as
the basis of optimization decision, and eventually
raise the level of equipment procurement in the
power enterprise of our country.
REFERENCES
Moore, R., Lopes, J., 1999. Paper templates. In
TEMPLATE’06, 1st International Conference on
Template Production. SCITEPRESS.
Smith, J., 1998. The book, The publishing company.
London, 2
nd
edition.
Zhang Yong, Wei bin,2008. The power grid enterprises
LCAM thinking. Energy technology and economy, (4).
Ma Jun, Jiang Yimin, 2006. Analysis of the full life cycle
cost of transformers. Transformers, (12).
Guo Qing, 2007. Discussion on the full life cycle
management of transmission line construction project
. Shanxi power.
Ahmed N.U, 1995. A design and implementation model
for life cycle cost management system. Information &
Management, Volume 28, Number 4, April 1995.
Joachim Schneider,et al(2006). Asset management
techniques. Electrical Power and Energy Systems,
(28).
Han Liqiang(2002). Application of CALS system in the life
management of weapon equipment and Its Revelation
[J]. Information theory and exploration, (6).
A Study on Procurement Management of China Power Enterprises based on the Concept of Life-cycle Management
81
A Study on Procurement Management of China Power Enterprises based on the Concept of Life-cycle Management
81