STEM Teachers' Competence Development:
When Opportunities Jump over Barriers
Nikolina Nikolova, Eliza Stefanova, Krassen Stefanov and Pencho Mihnev
Faculty of Mathematics and Informatics, Sofia University St. Kl. Ohridski, James Bourchier blvd. 5, 1164 Sofia, Bulgaria
Keywords: Teacher Training, Inquiry-Based Science Education, STEM Teachers’ Competence Development.
Abstract: In this paper we present a study, aimed to identify the main challenges teachers face when trying to implement
innovative teaching methods, stressing on identifying the needed STEM teachers competence development.
The overall design of the study follows the European Awareness Scenario Workshop methodology and aims
to negotiate the teachers’ need, policy makers decisions and other stakeholders’ understanding of the resent
National regulatory framework, related to the teachers’ competence development. The main research
activities, performed during the study, are outlined and compared with similar research efforts and initiatives.
At the end systematic analysis of results achieved is performed and proposals for further improvement of the
competence development of teachers were made. The extracted requirements – mode, forms, topics, etc., for
STEM teachers’ competence development are valuable for universities and other institutions offering
teachers’ professional development courses. They are a base for further design of computer supported inquiry-
based education for teachers’ competence development.
1 INTRODUCTION
The Enhancing Learning In Teaching via e-
inquiries (ELITe) Erasmus+ project aims to provide
computer-supported learning opportunities for
secondary teachers’ competence development, which
stands as a priority of the “Education and Training”
EC policy agenda. The main project goal is to support
computer-based teachers’ professional learning for
competence development, targeting specifically in-
service educators in the STEM (Science, Technology,
Engineering, and Mathematics) domain. We need to
use conceptual, methodological and domain specific
perspectives, in order to form specific requirements
for the software tools to be used in the project. This is
related to the first specific project objective: to
deepen understandings on the requirements for
STEM teachers’ competence development at
national levels, as conceptualised and expressed by
policy makers, policy mediators and practitioners. In
this paper we present the methodology how this
analysis to be performed, and describe the design,
conduction and delivery of specific tailored for
Bulgaria event used for this purpose. We also present
the main results from this analysis - the main
conclusions regarding domain specific aspects of
STEM teachers’ competence development in
Bulgaria.
There are many challenges faced from all the
stakeholders in Bulgaria policy makers, policy
mediators, teachers’ trainers, STEM teachers, and
broad society. Our main research goal in this paper is
to clarify main opportunities and barriers, as they are
seen by each stakeholder’s group, and to find a way
to negotiate the possible ways for their extended use
(opportunities) and solving or removing problems
(barriers). The extracted analysis and resume will be
used as input for further inquiry-based learning model
development and the respective software tools, and
the design and implementation of specific computer-
based learning scenarios for STEM teachers’ training.
2 RELATED WORK
The work of the Thematic Working Group Teacher
Professional Development’, which comprised experts
nominated by 26 European countries and stakeholder
organisations, resulted in a document named
“Supporting teacher competence development for
better learning outcomes” (European Commission,
2013). This important report was grounded on various
328
Nikolova, N., Stefanova, E., Stefanov, K. and Mihnev, P.
STEM Teachers’ Competence Development: When Opportunities Jump over Barriers.
DOI: 10.5220/0006767703280335
In Proceedings of the 10th International Conference on Computer Supported Education (CSEDU 2018), pages 328-335
ISBN: 978-989-758-291-2
Copyright
c
2019 by SCITEPRESS Science and Technology Publications, Lda. All rights reserved
policy documents on teacher training of the European
Commission (2007, 2010, 2012a, 2012b, 2012c),
Caena (2011a, 2011b), the European Union (2006,
2007, 2008, 2009) and other research studies. On the
base of examples of the policy approaches used in
Europe, this document explores and highlights the
concepts of teacher competences and competence
frameworks, discusses ways of development and
assessment of teacher competences, and defines the
key factors that lie behind successful policies
(European Commission, 2013, Chapter 5). The
document acknowledged that The process of
bringing stakeholders together to discuss these issues
can, in itself, be beneficial, especially if it leads to an
increased sense of ownership of the results and a
commitment to their implementation. (European
Commission, 2013, p. 43).
A major study of teachers’ related policy was
conducted during the 2002-2004 period by OECD in
collaboration with 25 countries (OECD, 2005),
aiming to explore, systematise, and present issues and
effective policies with respect to the activities, related
to developing effective teachers. Its methodology is
to some extent similar to the methodology of the
study, presented in this paper. It addresses 4 key
issues, related to the topic. The study methodology
included the preparation of countries’ background
reports (based on a predefined set of questions and
requirements), organising workshops in different
countries and disseminations of their results,
implementing national visits of experts groups,
writing paper reports on the basis of the different
visits to detect issues, collecting rich sets of data and
performing specific data analysis, and describing the
main results in the policy report (OECD, 2002).
Another well-known initiative of OECD is the
Teaching and Learning International Survey
(TALIS), a periodic survey, administered in 2008 and
2013, and planned for delivery in 2018. Bulgaria
participated in both 2008 and 2013 surveys and will
participate in the 2018 edition. This gives a very good
opportunity for triangulation of the findings and
results of the described by the current paper STEM
teachers’ competences development study with the
TALIS results for Bulgaria.
Yet another big OECD current initiative is the
Innovative Teaching for Effective Learning (ITEL)
project. First an extensive research work was
conducted, resulting in a book (Guerriero, 2017),
focussing on conceptual framework of teachers’
professional competence, where the teachers’
competence is fed by the initial, continuous, and
informal/non-formal teacher learning, consists of
content & pedagogical knowledge and affective-
motivational competences and beliefs, and results in
teaching approaches, which lead to instruction that
supports the cognitive and social-emotional student
learning (Guerriero, p. 261). This competence
framework was used for the development of the
survey instruments of international comparative
studies conducted in ITEL that investigate teachers’
knowledge as a key component of teacher quality
(Sonmark et al.).
There is a big number of other studies that focus
explicitly on the teaching-related factors, which play
as stimuli or barriers to inquiry-based learning (IBL).
For example, Kang and Keinonen, (2016) commented
the results of 7 small scale studies, conducted in
different single countries, and summarised that the
reported in these studies barriers and teacher
reluctance to apply IBL may have as main inhibiting
factors: the low teacher confidence and competence
in using inquiry instructions; the lack of time and
resources; the tight curricula; the inadequate
professional development; the large class sizes, the
lack of professional science content knowledge; the
difficulties in developing students’ ideas and in
designing experiments for students’ hypotheses; and
the insufficient school resources (Kang and
Keinonen, p. 32). Authors pointed out the “teachers’
confidence in teaching science and their collaboration
to improve science teaching” as important factors for
implementing IBL (Kang and Keinonen, p. 44). In
another study of 34 IBL early-adopting Australian
teachers, the participating teachers pointed out as the
most important barriers to IBL-teaching “the extreme
time restrictions on all scales, the poverty of their
common professional development experiences, their
lack of good models and definitions for what inquiry-
based teaching actually is, and the lack of good
resources enabling the capacity for change.
(Fitzgerald et al.).
In a successful effort to cope with the counted
above barriers, the IBL-in-Science focused EC
project “weSPOT” formulated prerequisites for
successful IBL in schools, based on earlier research
results, namely: change teachers’ attitude and
provide stronger support to students (at micro level);
provide schools management support; enable
teachers to share experience and best practices;
provide the needed ICT support (at mezzo level);
provide constant training for teachers and a rich set
of resources based on ICT infrastructure (at macro
level). (Nikolova and Stefanova). The weSPOT
researchers then developed a reference model for
inquiry skills, and a diagnostic instrument to measure
the individual performance on inquiry skills. In this
way the project “
provided teachers and learners with
STEM Teachers’ Competence Development: When Opportunities Jump over Barriers
329
efficient support and the technology tools to reach
competence, progress and to become able to find the
optimal inquiry level to match their needs
(Mikroyannidis et al.)
Another important research program of EC
related to improving innovation in education is
eTwinning. An excellent overview of the best efforts
related to preparation and training of STEM teachers
in this program is given in (Papadakis, 2016).
3 METHODOLOGY
The ELITe consortium has performed a detailed
analysis of the situation in four European countries,
including Bulgaria. On the base of this analysis a
comprehensive research report called “Policy
envisions and requirements for STEM teachers
competence development in Greece, the Netherlands,
Bulgaria and Spain” was developed. This report was
used in order to design multiplier national events,
aimed to communicate and negotiate the main
outcomes from this analysis with policy executives,
policy mediators and practitioners,, and to identify
systemic opportunities and challenges to implement
training activities for STEM teachers’ competence
development.
The European Awareness Scenario Workshop
(EASW) methodology was used for the
implementation of such event in Bulgaria. This
methodology relies on dividing event’s participants in
varying compositions groups, depending on the
specific goal to be addressed. In such a way, working
in groups and in a plenary was used to develop
scenarios on the workshop topics, to name barriers,
and to propose strategies and steps for realising the
goals and overcoming the barriers. Working on
concrete “scenarios” or various problems, it invites
working group members to think about realistic
challenges rather than dreaming about unlikely
problems and how to solve them. Such a workshop
follows three phases - the critical analysis phase, the
visionary phase and the implementation phase “to
create a basis for local action”. The EASW setting
allows for interaction between stakeholders - rather
than a static one, in which presentations are provided
to participants, and aim for consensus building rather
than instructional approach. One disadvantage of
EASWs is their reliance on stakeholder balance,
which might never be reached realistically. However,
targeting a certain number of distinctive stakeholders
is a good starting point to make “bringing together a
broad range of interests” a little more concrete.
We planned to have three sessions during our
event Raising issues session, Negotiation session,
and Structuring proposals session. During the
Raising issues session participants work in
homogenous groups, aiming to identify the
opportunities and challenges on implementing
activities for STEM teacher’s competence
development. During the Negotiation session they
were re-arranged in heterogeneous groups, looking
for solving the conflict aspects and generating
recommendations on how to take advantage of the
opportunities and how to avoid / deal with the
challenges. The aim of Structuring proposal session
was, in plenary, to map the issues and
recommendations in the frame of broader educational
priorities.
4 IMPLEMENTATION
4.1 Setting and Context of Event
The multiplier event took place in June 2017, at the
end of the academic year in Bulgaria, with the total of
48 participants. It strictly followed the EASW
methodology.
According to the methodology, participants were
separated in three groups:
Policy makersrepresentatives from Ministry
of Education, Regional Management Centers
of Education, National Center of Information
support, professors responsible for teachers’
training curricula from main universities in
Bulgaria, and head teachers responsible for
local school policy in STEM teaching;
Practitioners STEM teachers from general
and vocational schools;
Broad Society members parents,
representatives of private educational centers,
private companies, NGO and research centers.
In Bulgaria, since 2016, there is a new Law on pre-
school and school education. We paid special
attention to teachers’ professional development and
the way of attestation, and National requirements for
‘teacher’ professional qualification. They stimulate
teachers’ professional development by regular
trainings, participation in research activities and
experience exchange events. The new students’
national educational standards and curricula for
STEM education also is a challenge in front of the
teachers and teachers’ educators. Another important
initiative of the Ministry of Education and Science,
called Innovative school, is providing innovative
vision, development strategies, and teaching
CSEDU 2018 - 10th International Conference on Computer Supported Education
330
approaches to all interested schools, and stimulating
the school managers to involve the pedagogical staff
at schools in activities, enhancing their academic,
pedagogical, administrative and communicative
competences.
On the base of these specific facts and the issues
described in the preliminary analysis research report,
we formulate the main topics for the multiplier event
discussions:
What teacher competences are needed to
design Inquiry-based learning (IBL) activities
in class;
What kind of support is needed for teachers for
IBL day-to-day application;
What content should be provided and how, in
order to spread widely the IBL approach;
What are the challenges in schools
management related to strategy, curricula and
teaching approaches;
What are the opportunities and challenges in
using training for building teacher
competences.
4.2 Structure of the Event
The raising issues section started with a presentation,
which provided detailed information in relation to
project description and aims, and main results from
the analytical report of national policy documents on
policy envisions and requirements for STEM
teachers’ competence development. All participants
were divided into three homogenous groups and were
given a list with topics prepared in advance.
Figure 1: Homogenous groups' SWOT analysis.
Policy makers were engaged with national
standards on teachers’ qualification, trainings topics
for teachers, how to receive feedback from teachers
and society, how to assess (in advance and post-
event) relevance and quality of particular teaching
training course and/or teachers’ training provider.
Practitioners discussed administrative issues, the
need of relevant environment for STEM teaching
(textbooks, simulations, and specialised labs), the
new subjects in the curricula, the new summative
exams and how they correspond to national standards
of education, the teachers’ attestation process and
related carrier development, salary, penalties.
Broad Society members were invited to discuss
the results of teachers’ work, the possibility of earlier
graduating of students and joining the labour market,
the lack of motivated and qualified teachers in STEM
disciplines, the new requirements for school-parent
communication and sharing responsibilities.
The moderators conducted and managed the
discussion in each group. They also wrote down
strengths, weaknesses, opportunities and treats
related to the new regulatory framework, as identified
in each group, creating the ground for performing the
SWOT analysis. After that all participants joined
together, and the issues identified in relation to the
SWOT analysis were presented from representatives
of each group. After a short discussion, all
participants voted in favour of different statements of
the SWOT analysis. The statements which gathered
most of the votes were used to identify the set of
issues to be negotiated during the second session.
Figure 2: Votes for Negotiation issues.
For the second session (negotiation session)
participants were divided again into three but
heterogeneous groups, with equal number of
representatives from policy-makers, practitioners and
broad society members. The next task for the
participants was to focus on differences, to look for
reasoning and negotiating a solution. As a result from
this session, each group had to find a compromise
vision for STEM teachers’ professional development
and Inquiry-based learning. The final outcome was a
list with ideas, suggestions and possible actions
agreed in each group. At the end of this session
representatives from each group presented and
justified their findings in a general plenary meeting
and discussion with all participants. A summary and
conclusions on the main needs and considerations in
relation to STEM teachers’ training was the final
result from this session, forming an extended list with
the requirements for effective and efficient teachers’
trainings topics, logistic, delivery, specific
activities, etc.
The final session structuring proposals was
performed in a week after the end of the face-to-face
workshop event. SWOT analysis was performed a
STEM Teachers’ Competence Development: When Opportunities Jump over Barriers
331
few days after the multiplier event by the organisers
by using the open questions of the questionnaire,
participants’ feedback during the event, collection of
the results during each session work, and how they
evaluate the participants' activity and quality of work.
It presents strengths, weakness, opportunities and
threats in relation to planning and implementation of
the multiplier event, the effect of networking, and
quality and relevance of outcomes. The details of the
main results are outlined in the next section.
4.3 Evaluation of the Face-To-Face
Workshop
All participants filled in anonymous questionnaires
just before the closing of the event. They were asked
to evaluate the organisation of the event in terms of
content / thematic, process and venue, background
materials, process / methodology of the event, and
overall satisfaction from the event. The evaluation
questionnaire was filled in by 40 participants. They
found background materials – initial information and
presentation, relevant to the event topic and their
personal professional interest.
Figure 3: Workshop materials evaluation.
Evaluation of the process and methodology shows
only one person with thinking that the event should
provide more opportunities of interaction, one person
with opinion that there were no enough opportunities
of gaining new ideas, and two participants with
relatively low level of satisfaction of the event
outcomes.
Regardless of these very few moderate comments, the
huge majority of participants provide high scores of
the methodology and process of implementation of
the event. 90% (36 persons) show high level of
overall satisfaction of the event. The participants’
comments share the feelings of satisfaction, and
expectations this workshop to be followed by other
similar events.
Figure 4 Overall satisfaction level.
5 MAIN OUTCOMES
The outcomes of the Raising issues session were
summarised and presented as a SWOT analysis result,
as shown in Table 1:
Table 1: SWOT analysis of the National regulatory
framework in accordance with teachers' competence
development.
(S)TRENGHTS
1. STEM teachers are free to present new subjects and
to use new teaching methods and innovative training
2. Qualification program is well regulated with good
o
pp
ortunities for STEM teachers
3. Opportunity for STEM teachers to participate in
trainin
g
outside the countr
y
(
e.
g
. CERN
)
4. The new regulation gives opportunities for
differentiation of the education after 10
th
grade
5. Clear and transparent system for the assessment of
STEM teachers
6. New regulation provides clear directions for STEM
teachers with detailed work
g
oals
7. The Inclusive Education provides new opportunities
for STEM teachers
(W)EAKNESSES
1. Lack of clear links and dependencies between
attestation of STEM teachers and their salaries and
career develo
p
ment.
2. Lack of choice for professional qualification
3. Reduced number of hours in the science subjects
leadin
g
to
p
roblems how to satisf
y
standards.
4. The standards for learning content are slow to follow
the rapid STEM developments
5. Lack of flexibility in following the learning program
leads to low motivation and high level of absences
of students
(
includin
g
talented and
g
ifted students
)
.
6. Long time period between teacher attestations
p
revents rapid development of STEM teachers.
7. Lack of hi
h
ualified teachers
(O)PPORTUNITIES
1. STEM teachers have more opportunities for
innovative
p
ractices throu
g
h the school curricula.
CSEDU 2018 - 10th International Conference on Computer Supported Education
332
Table 1: SWOT analysis of the National regulatory
framework in accordance with teachers' competence
development (cont.).
2. STEM teachers can implement new teaching
methods through different research programs.
3. STEM teachers can use electronic materials and
innovative software tools for labs and
p
ractice.
4. Team Buildings and STEM teacher training are
encouraged under a Differentiated Model
5. Cloud technologies give new possibilities for STEM
teachers for better relationships with parents
6. STEM teachers can try new forms of education like
distance and blende
d
education
7. STEM teacher competences can be assessed by
inde
p
endent
p
rofessional or
g
anisations.
8. Innovative schools can allow STEM teachers to
develop more flexible and creative curricula
accordin
g
to the school
p
rofile and vision.
9. Teachers’ qualifications can be flexible in time and
subjects and as a result to be better aligned to
teachers
p
rofessional needs.
(T)HREATS (from external factors and environment)
1. Low STEM teachers’ salaries
2. Lack of coordination between the MES and Higher
Education (HE) regulations
3. Not all STEM teachers are di
g
itall
y
literate
4. Lack of control over the quality of STEM teachers’
training courses. Training organisations will offer
low quality cheap courses to attract more teachers by
easily providing qualification credits to the
m
.
5. Lack of clear system for recognising STEM teachers
p
rofessional certificates and similar rewards
6. Some institutes ‘produce’ STEM teachers with low
q
ualit
y
and
q
uestionable di
p
lomas
7. Low level of society participation and support for the
STEM teachers endeavors.
8. Lack of regulated funding for STEM education
environment
Some points were marked both as strengths and as
weaknesses from different groups. The reason is that
they were pointed from different perspectives. For
example, the annual thematic plan give some
possibility for teachers with common profile to
collaborate in preparation of the lessons, but it also is
a barrier for their flexibility to change the plan and
lessons according to the student’s needs. In general,
both groups agreed on these two different
perspectives. This was reflected in their
recommendations, which are elaborated in the next
Table 2. It contains recommendations on how to take
advantages of opportunities and on how to overcome
challenges emerged during the previous session.
Table 2: Heterogeneous group's results.
Group 1
1. To organise STEM teachers’ trainings in mixed
forms
online and traditional learning
2. A certain number (%) of qualification credits to be
related to the specialty/subject teacher training (with
academic and practical trainings)
3. The qualification courses to be based on up to date
STEM subject content and teaching methodology
4. To combine knowledge and skills from different
STEM sub
j
ects in the courses
5. To offer courses aligned to the STEM research
methodolo
gy
accom
p
anied b
y
p
ractical exercises
Group 2
1. To motivate training organisations to offer rich
choice of course themes and
q
ualification courses
2. To plan methodological thematic trainings for
STEM teachers in a practical and interactive way.
3. To stimulate the use of e-simulations and other
relevant software tools for STEM teachers both for
their trainin
g
s and how to use them in the classroom.
Group 3
1. STEM teachers’ training should combine face-to-
face with other relevant forms.
2. STEM teachers should have courses for the
inclusion of s
p
ecial educational needs
(
SEN
)
p
u
p
ils.
3. STEM teachers should be offered specific courses
on new teaching methods for their subjects
4. STEM teachers need specific general courses on
applying interactive teaching methods
It was not difficult to come with these
recommendations, as the three different groups
agreed on more of 70% of all issues from the SWOT
analysis. There were cases of disagreement, for
example teachers think that opportunities for
professional qualifications are limited, while policy
makers had the opposite opinion. Another point of
disagreement is related to the opinion of policy
makers for the lack of high qualified STEM teachers,
while the teachers; opinion is opposite. Also, there
were some fears among teachers from new
regulations regarding teachers’ evaluation.
Most of the recommendations from all the groups
were related to the content of the teachers’ training
courses. The teachers’ training courses’ topics were
the most discussed. The recommendations were
mostly related to learning materials and activities. All
groups agreed that new rapid science achievements
should reflect in immediate changes in the students’
curricula. Special attention was dedicated to the use
of innovative software tools in STEM disciplines.
There was agreement that science disciplines require
more simulations of phenomena and possibilities for
students to experiment, generate hypothesis and
STEM Teachers’ Competence Development: When Opportunities Jump over Barriers
333
formulate conclusions. For mathematics and
computer science reasoning, the algorithmic thinking
and use of interactive digital learning resources were
recognised as more suitable.
All groups also recognised the importance of the
Interdisciplinary approach practical trainings
combining different STEM subject matter and
relationships, in collaboration with other STEM
subject teachers. This is related to developing new
learning designs, stressing on implementation and
evaluation of students’ achievements. Also, it is
related to applying innovative teaching methods
interactive methods of teaching / learning, design and
implementation of student’s inquiry, group work
management, use of innovative ICTs in education,
etc., focused on STEM education.
All groups were also agreed, that abilities to work
with small well aligned students’ groups are critical
for the success of STEM education. These groups
need to be tailored to the specifics of the subject and
the educational need involving students with special
educational needs and learning disabilities, as well as
work with talented students.
Another important recommendation was related
to effective communication and collaboration with
parents and the involvement of parents in all aspects
of the school live, so called ‘school for parents’. This
is related to efficient management of schools, and
especially for organising STEM teaching and
learning.
All groups agreed, that without efficient
evaluation and assessment of educational process it is
not possible to achieve high quality in STEM
education.
Most of the participants agreed on the forms of
STEM teachers’ training courses. They prefer active
practical learning process instead of the standard one,
based on lectures and formal exams. They agreed that
demonstration and participation in innovative
teaching methods implementation is very important
for the successful transfer of given teaching
methodology to the classroom. Also, they strongly
agree on the use of online training courses content and
specialised software tools for support of the STEM
specifics. In brief, the most important requirements,
related to the forms of teachers’ training courses are:
Face-to-face or blended learning
Online courses as a current support, and as
an archive for long term use.
Balance between learning at work place
(school) and out the door courses regional,
national workshops as environment for sharing
ideas and experience
6 CONCLUSIONS
The multiplier event, delivered at the end of June
2017, developed a good network of policy makers,
teachers’ trainers, teachers and broad society
members. It was the first step in identifying the
requirements of STEM teachers for effective and
efficient competence development with the use of
relevant software tools.
The main outcomes from the Bulgarian multiplier
event were very similar to the outcomes of other three
such events. All outcomes from these events were
summarised and used as requirements for the special
inquire-based teaching software system DojoIBL
system (http://dojo-ibl.appspot.com).
This system was developed by the project partner
from the Netherlands and it is specially designed to
implement inquiry-based methodology for learning.
The application has been adapted also to the four
countries’ specific national requirements, and the user
interface has been translated in Bulgarian, Dutch,
Spanish and Greek language.
At the moment, the project is at the phase of first
pilot teacher trainings, which are conducted in
blended learning form, following the inquiry-based
learning methodology, and using the DojoIBL
software tool.
After the end of all pilot experiments, analysis of
the results of trainings of STEM teachers will be
performed. On the base of this analysis the project
will formulate set of guidelines and requirements for
STEM teachers’ competence development in Europe
with the use of specialised software tools.
The teachers from all four countries in the project
shared their needs of trainings on the new topics in
the student’s educational standards and curricula. For
STEM teachers, very special topic of interest is the
use of relevant ICTs, providing interactivity that can
compensate the limitations of school specialised labs
(totally missing or poor of equipment). They need
also practical courses related to the interweaving of
different disciplines, providing ideas, design
examples, and directions for students’ achievement
and the process assessments in implementation of
interdisciplinary learning. They also need trainings on
how to design, deliver and conduct an inquiry based
learning on specific topics in specific grades.
All the stakeholders groups agreed on the need of
application of modern teaching approaches in the
classroom. Special attention is dedicated to the
interactive teaching methods which still are not very
popular in Bulgarian schools. For STEM learning
disciplines there is a special need teachers to be
CSEDU 2018 - 10th International Conference on Computer Supported Education
334
trained on how to design, deliver and conduct
inquiry-based learning process.
Different forms of assessment and related
feedback is still a problem for teachers having
practices mainly on the use of open/closed questions
tests but experiencing lack of skills in the evaluation
of practical work, team work, or inquiry-based
learning and other innovative methods.
ACKNOWLEDGEMENTS
The research is done with financial support of
Enhancing Learning In Teaching via e-inquiries
(ELITe) project, Erasmus+, KA2 - Cooperation for
Innovation and the Exchange of Good Practices,
Strategic Partnerships for school education, Project
Code: 2016-1-EL01-KA201-023647.
The article is partially supported by Sofia
University „St. Kliment Ohridski“ Research Science
Fund project 80-10-217/24.04.2017 „Inquiry-based
learning in high-tech area as an application of modern
ICTs“.
REFERENCES
Caena, F., 2011a. Literature review. Teachers’ core
competences: requirements and development.
European Commission, Brussels.
Caena, F. 2011b. Literature review: Quality in teachers’
continuing professional development. European
Commission, Brussels.
European Commission, 2007. Communication from the
Commission to the European Parliament and Council:
Improving the Quality of Teacher Education. COM
(2007) 392 final. Brussels, 3.8.2007.
European Commission, 2010. Developing coherent and
system-wide induction programmes for beginning
teachers: a handbook for policymakers. Staff Working
Document 538 final. Brussels.
European Commission, 2012a. Rethinking Education:
Investing in skills for better socioeconomic outcomes.
COM(2012) 669/3
European Commission, 2012b. Assessment of Key
Competences in initial education and training: Policy
Guidance. Strasbourg, 20.11.2012. SWD (2012) 371
final.
European Commission, 2012c. Supporting the Teaching
Professions for Better Learning Outcomes. Strasbourg,
20.11.2012. SWD (2012) 374 final.
European Commission, 2013. Supporting teacher
competence development for better learning
outcomes”. Education and Training Directorate. At:
http://ec.europa.eu/dgs/education_culture/repository/e
ducation/policy/school/doc/teachercomp_en.pdf
European Union, 2006. Key Competences for Lifelong
Learning, a European Reference Framework. Brussels,
2006.
European Union, 2007. Conclusions of the Council and of
the Representatives of the Governments of the Member
States, meeting within the Council of 15 November
2007, on improving the quality of teacher education.
Official Journal C 300/6, 12.12.2007.
European Union, 2008. Conclusions of the Council and of
the Representatives of the Governments of the Member
states, meeting within the Council of 21 November
2008 on preparing young people for the 21st century:
an agenda for European cooperation on schools.
Official Journal 2008/C 319/08, 13.12.2008.
European Union, 2009. Council Conclusions of 26
November 2009 on the professional development of
teachers and school leaders. Official Journal 2009/C
302/04, 12.12.2009.
Fitzgerald, M., & Danaia, L., & McKinnon, D. H., 2017.
Barriers Inhibiting Inquiry-Based Science Teaching
and Potential Solutions: Perceptions of Positively
Inclined Early Adopters. In Research in Science
Education, July 2017, Springer Science+Business
Media Dordrecht
Guerriero, S. (ed.), 2017. Pedagogical Knowledge and the
Changing Nature of the Teaching Profession. OECD
Publishing, Paris.
Kang, J., Keinonen, T., 2016. Examining factors affecting
implementation of inquiry-based learning in Finland
and South Korea. In Problems of Education in the 21st
Century”, Volume 74, 2016, pp.31-48
Mikroyannidis, A., et al., 2013. weSPOT: A Personal and
Social Approach to Inquiry-Based Learning, In Journal
of Universal Computer Science, vol. 19, no. 14 (2013),
pp. 2093-2111. © J.UCS
Nikolova N., Stefanova E., 2014. Inquiry-Based Science
Education in Secondary School Informatics
Challenges and Rewards. In Cerone A. et al. (eds)
Information Technology and Open Source:
Applications for Education, Innovation, and
Sustainability. SEFM 2012. Lecture Notes in Computer
Science, vol 7991. Springer, Berlin, Heidelberg
OECD, 2002. Attracting, Developing and Retaining
Effective Teachers. Design and Implementation Plan
for the Activity. Paris: OECD Publishing.
OECD, 2005. Teachers Matter: Attracting, Developing,
and Retaining Effective Teachers. Paris: OECD
Publishing.
Papadakis, S. (2016). Creativity and innovation in
European education. 10 years eTwinning. Past, present
and the future. International Journal of Technology
Enhanced Learning, 8, 3/4, pp. 279 - 296.
Sonmark, K., et al., 2017. Understanding teachers'
pedagogical knowledge: report on an international
pilot study. OECD Education Working Papers, No. 159.
OECD Publishing, Paris.
STEM Teachers’ Competence Development: When Opportunities Jump over Barriers
335