loading
Papers Papers/2022 Papers Papers/2022

Research.Publish.Connect.

Paper

Paper Unlock

Authors: Imran Sheikh and Michael Short

Affiliation: University of Leicester, United Kingdom

Keyword(s): Controller Area Network, Conformance testing, Network protocol verification.

Related Ontology Subjects/Areas/Topics: Distributed Control Systems ; Informatics in Control, Automation and Robotics ; Intelligent Control Systems and Optimization

Abstract: Since its introduction in the early 1980’s, CAN has become the de-facto communications protocol employed in vehicle and industrial control applications. Before any new product can claim to support CAN-connectivity, compliance with the protocol at the physical and data link layers must be tested and verified. To help standardize the requirements for such testing, ISO has set a draft standard specifically for CAN conformance testing. Traditionally, CAN controllers and transceivers have been implemented at the silicon level, either in the form of dedicated IC’s or as on-chip peripherals of embedded devices. The practical implementation of CAN conformance testers has been realised using dedicated hardware and specially written analysis software; this is a practical approach when testing and verifying conformance prior to high-volume IC manufacture. However, recent years have seen an increased interest in the employment of CAN-connected devices implemented by programmable logic devices su ch as FPGA’s. Such ‘soft core’ implementations are often in small-volume (or even one-off) batches. In such circumstances, for cost and availability reasons, it may not be practical for developers to use traditional CAN-conformance testing equipment. To help alleviate this problem, this paper proposes a low-cost and easily implemented method which will allow developers to fully test a CAN soft core implementation. The method is based around simple off-the-shelf development boards and the simple analysis tool Chipscope, and allows developers to verify a CAN core against the relevant ISO standards. Finally, the paper describes the use of the test bed in the verification of an open-source CAN soft core implementation. (More)

CC BY-NC-ND 4.0

Sign In Guest: Register as new SciTePress user now for free.

Sign In SciTePress user: please login.

PDF ImageMy Papers

You are not signed in, therefore limits apply to your IP address 18.116.63.174

In the current month:
Recent papers: 100 available of 100 total
2+ years older papers: 200 available of 200 total

Paper citation in several formats:
Sheikh, I. and Short, M. (2009). A LOW COST AND FLEXIBLE APPROACH TO CAN CONFORMANCE TESTING. In Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO; ISBN 978-989-8111-99-9; ISSN 2184-2809, SciTePress, pages 97-104. DOI: 10.5220/0002215300970104

@conference{icinco09,
author={Imran Sheikh. and Michael Short.},
title={A LOW COST AND FLEXIBLE APPROACH TO CAN CONFORMANCE TESTING},
booktitle={Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO},
year={2009},
pages={97-104},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002215300970104},
isbn={978-989-8111-99-9},
issn={2184-2809},
}

TY - CONF

JO - Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO
TI - A LOW COST AND FLEXIBLE APPROACH TO CAN CONFORMANCE TESTING
SN - 978-989-8111-99-9
IS - 2184-2809
AU - Sheikh, I.
AU - Short, M.
PY - 2009
SP - 97
EP - 104
DO - 10.5220/0002215300970104
PB - SciTePress