Authors:
Diego V. Queiroz
1
;
Ruan D. Gomes
2
;
Cesar Benavente-Peces
3
;
Iguatemi E. Fonseca
4
and
Marcelo S. Alencar
5
Affiliations:
1
Federal University of Campina Grande (UFCG), Brazil, Universidad Politécnica de Madrid (UPM) and Spain
;
2
Federal Institute of Technology (IFPB) and Brazil
;
3
Universidad Politécnica de Madrid (UPM) and Spain
;
4
Federal University of Paraiba (UFPB) and Brazil
;
5
Federal University of Campina Grande (UFCG), Brazil, Federal University of Bahia (UFBA) and Brazil
Keyword(s):
TSCH, Contiki, Internet of Things, Orchestra, Minimal Schedule, Guard Time, Cooja, Frequency Hopping.
Related
Ontology
Subjects/Areas/Topics:
Modeling, Algorithms, and Performance Evaluation
;
Sensor, Mesh and Ad Hoc Communications and Networks
;
Telecommunications
;
Wireless Information Networks and Systems
Abstract:
The goal of this paper is analysing the use of the IEEE 802.15.4e standard MAC layer protocol Time-Slotted Channel Hopping (TSCH) mode in the context of Internet of Things (IoT) and Industrial IoT (IIoT) aimed at reducing narrow-band interferences and the multi-path fading impact on available channels by using frequency hopping, with network time synchronization to achieve low-power operation. In low disturbances environments using several channels provides the diversity benefits. However, using several channels requires channel scanning and switching leads to extra power consumption. It could be accepted in harsh environments (industrial), due to its influence on channels features, requiring more channels, and it is necessary to continuously hop seeking for the best one to achieve the best performance. Several experiments have been simulated and implemented in real testbeds the laboratory as first validation approach. The performance and energy efficiency of the entire network is an
alysed for different scheduling methods, packet transmission rates, number of used channels and guard time. The relevant conclusion showed in this investigation is that using all the available channels of the standard is not required to achieve the best joint-results given that, regardless the scheduling method used, considering a higher number channels requires a higher power consumption for channels quality exploration and packet reception rate decreases.
(More)