ACCURATE OBSERVER FOR MULTI-FAULT DETECTION AND ISOLATION IN TIME VARYING SYSTEMS USING FAULT CHARACTERIZATION

Ryadh Hadj Mokhneche, Hichem Maaref

2006

Abstract

The usual observers up to now allowed the detection of faults in a parameter system via residue signals where each one is judicious to detect one or more faults. However in the event of occurrence of several faults on the same parameter, the residue signal of this observer will be able to detect them only if those are sufficiently spaced in time. But in the event of their occurrence at very close moments, they will be overlapped or compared to only one fault and having a more significant amplitude. Thus, if a possible fault compensation is carried out, it will be incorrect. In this paper, it is proposed then an accurate observer for fault detection and isolation for one or several faults on a same parameter and with a significant resolution. First, the characteristics of fault are shown to be used in a goal of determinating the types of possible detections. An application of simulation is detailed and achieved for fault detection in a sensor-based system, where the results are discussed. The succession effect of several faults is tested, at one time or different times, on the amplitude, sign and general form of these faults. In the end, the resolution of this observer is highlighted where a comparison between the usual observer and the accurate observer is discussed.

References

  1. A. Saberi, A. A. Stoorvogel, P. S. and Niemann, H. (2000). Fundamental problems in fault detection and identification. International Journal of Robust and Nonlinear Control, 10:1209-1236.
  2. Frisk, E. and Nyberg, M. (2001). A minimal polynomial basis solution to residual generation for fault diagnosis in linear systems. Automatica, 37:1417-1424.
  3. Gertler, J. J. and Dekker, M. (2002). Fault detection and diagnosis in engineering systems. Control Engineering Practice, 10:1037-1040.
  4. H. Hammouri, M. K. and Yaagoubi, E. H. E. (1999). Observer-based approach to fault detection and isolation for nonlinear systems. IEEE Transactions on Automatic Control, 44:1879-1884.
  5. Jiang, B. and Chowdhury, F. (2004). Observer-based fault diagnosis for a class of nonlinear systems. Proceeding of the 2004 American Control Conference, Boston, Massachusetts, USA, 6:5671-5675.
  6. K. Adjallah, D. M. and Ragot, J. (1994). Non-linear observer-based fault detection. Proceedings of the 3rd IEEE Conference on Control Applications, 2:1115- 1120.
  7. Kuo, B. C. and Golnaraghi, F. (2003). Automatic control systems, 8th edition. Eds John Wiley and Sons, New York.
  8. P. Zhang, S. X. Ding, G. Z. W. and Zhou, D. H. (2001). An fdi approach for sampled-data systems. the 2001 American control conference, Arlington, USA, pages 2702-2707.
  9. R. Hadj Mokhneche, H. M. and Vigneron, V. (2005). Hybrid algorithms for the parameter estimate using fault detection, and reaching capacities. The 2nd International Conference on Informatics in Control, Automation and Robotics ICINCO, Barcelona, Spain, 4:289- 293.
  10. Rosenwasser, E. N. and Lampe, B. P. (2000). Computer controlled systems: analysis and design with processorientated models. Communications and Control Engineering, Eds. Springer, London, UK.
  11. Tan, C. P. and Edwards, C. (2003). Sliding mode observers for robust detection and reconstruction of actuator and sensor faults. International Journal of Robust and Nonlinear Control, 13:443-463.
  12. V. Venkatasubramanian, R. Rengaswamy, K. Y. and Kavuri, S. N. (2003a). A review of process fault detection and diagnosis. part i: Quantitative model-based methods. Computers and Chemical Engineering, 27:293-311.
  13. V. Venkatasubramanian, R. R. and Kavuri, S. N. (2003b). A review of process fault detection and diagnosis. part ii: Qualitative models and search strategies. Computers and Chemical Engineering, 27:313-326.
  14. V. Venkatasubramanian, R. Rengaswamy, S. N. K. and Yin, K. (2003). A review of process fault detection and diagnosis. part iii: Process history based methods. Computers and Chemical Engineering, 27:327-346.
  15. Zhang, Q. (2000). A new residual generation and evaluation method for detection and isolation of faults in non-linear systems. International Journal of Adaptive Control and Signal processing, 14:759-773.
Download


Paper Citation


in Harvard Style

Hadj Mokhneche R. and Maaref H. (2006). ACCURATE OBSERVER FOR MULTI-FAULT DETECTION AND ISOLATION IN TIME VARYING SYSTEMS USING FAULT CHARACTERIZATION . In Proceedings of the Third International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO, ISBN 978-972-8865-61-0, pages 134-141. DOI: 10.5220/0001217201340141


in Bibtex Style

@conference{icinco06,
author={Ryadh Hadj Mokhneche and Hichem Maaref},
title={ACCURATE OBSERVER FOR MULTI-FAULT DETECTION AND ISOLATION IN TIME VARYING SYSTEMS USING FAULT CHARACTERIZATION},
booktitle={Proceedings of the Third International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,},
year={2006},
pages={134-141},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0001217201340141},
isbn={978-972-8865-61-0},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Third International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,
TI - ACCURATE OBSERVER FOR MULTI-FAULT DETECTION AND ISOLATION IN TIME VARYING SYSTEMS USING FAULT CHARACTERIZATION
SN - 978-972-8865-61-0
AU - Hadj Mokhneche R.
AU - Maaref H.
PY - 2006
SP - 134
EP - 141
DO - 10.5220/0001217201340141