of UWB technology is presented. In section 3, results
of a simulated setup are shown to prove the feasibility
of this approach. In the last sections conclusions and
an outline of planned future research on this topic is
presented.
2 STATE OF THE ART
2.1 Definitions and Terminology
Ultra-wideband describes a radio pulse technology
with a signal bandwidth greater than 500 MHz or
the fractional bandwidth of 20 %. In Germany, the
Federal Network Agency (”Bundesnetzagentur”) has
adopted the regulations of the European Conference
of Postal and Telecommunications Administrations
(CEPT) for UWB signals (Bundesnetzagentur, 2008).
It is important to be noticed that a maximum spectral
density of -41.3 dBm/MHz is allowed for all UWB
applications.
The main application areas for the technology in-
clude imaging, radar and communication systems and
the field is currently under very intensive research.
For low power communication, first commercial chips
will be available in the near future (Decawave, 2008).
2.2 Ultra-wideband Radar
One of the most interesting research areas is the us-
age of UWB pulses for radar applications. Different
objects and their positions can be detected by inter-
preting reflected UWB signals. The short pulses (typ-
ical time domain duration of Full Width at Half Max-
imum of 100 ps) provide a very high range resolu-
tion and the large bandwidth (more than 500 MHz)
allows a fine radar resolution of closely spaced ob-
jects (Rahayu et al., 2008). So far, the main appli-
cations are in the fields of automotive (e.g. park-
ing assistance, pre-crash sensing, blind spot detection,
stop&go (Dominik, 2007)) and of through-wall detec-
tion (Chamma, 2007), (Lubecke et al., 2007).
2.3 Medical Applications
Also in medical imaging, UWB signals can be used
as radar. A scan of the part of the body under exami-
nation results in an image of the underlying structure.
A precise analysis of the reflected signal can deliver
information about the substances in the body and their
amounts (Tan and Chia, 2004). Depending on the fre-
quency range used, further possible applications in-
clude cardiac biomechanics and chest movements as-
sessments, obstructive sleep apnoea monitoring, soft-
tissue biomechanics research, heart and chest imag-
ing, and also cardiac and respiratory monitoring, sud-
den infant death syndrome monitor and vocal tract
studying (Staderini, 2002). A feasibility study on us-
ing one UWB device for communication and radar is
presented in (Bilich, 2006). In (Gupta et al., 2008) a
FM-UWB system for sensing purposes in biomedical
applications is proposed and implemented in a Heart
Rate Monitoring application.
So far, not much work has been done concerning
measurements of water accumulations in the body. To
our knowledge only one other group did also iden-
tify water blobs in the human body in the course of
work on an imaging systems for breast cancer detec-
tion (Khor and Bialkowski, 2007).
3 SIMULATION
Goal of the simulation is to show the feasibility of the
system concept. The reflections of UWB pulses im-
pinging on a realistic model of a section of the human
body are recorded. All parameters are adjusted and
tuned to obtain a realistic simulation of the bladder in
the human body.
3.1 Setup
The developed model of the human bladder is based
on the anatomical drawings from (R.Pabst, 2009),
Fig. 2.
Figure 2: Anatomical drawings of the human bladder,
empty and full.
For the simulation, multiple dielectric layers (skin,
fat, muscle, bladder and bone) are used as a repre-
sentation of the bladder (Fig. 3). The thicknesses
of the different layers were chosen in accordance to
the anatomical model from (R.Pabst, 2009) for an ex-
emplary human body, the thickness of the layer that
represents the bladder is changed in accordance to the
state (empty or full).
According to (C. Gabriel and Corthout, 1996),
(S. Gabriel and Gabriel, 1996), the frequency depen-
dency of the dielectric properties of the biological tis-
BIOSIGNALS 2010 - International Conference on Bio-inspired Systems and Signal Processing
398