
Synthesis of Reuse Water Networks by PSO Approach
Mauro A. S. S. Ravagnani
1
, Daniela E. G. Trigueros
2
, Aparecido N. Módenes
2
and Fernando Espinosa-Quiñones
2
1
State University of Maringá, Av. Colombo 5790, Maringá, PR, Brazil
2
State University of Paraná West, Rua da Faculdade 645, Toledo, PR, Brazil
Keywords: Reuse Water Networks, PSO, MINLP, Optimization.
Abstract: In the present paper the problem of reuse water networks have been modeled and optimized by the
application of a modified Particle Swarm Optimization (PSO) algorithm. A proposed modified PSO method
lead with both discrete and continuous variables in Non-Linear Programming (NLP) and Mixed Integer
Non-Linear Programming (MINLP) formulations that represent the water allocation problems. Pinch
analysis concepts are used jointly with the improved PSO method. A literature problem was solved with the
developed systematic and results has shown excellent performance in the optimality of reuse water network
synthesis based on the criterion of minimization of annual total cost.
1 INTRODUCTION
In the last decades the studies in the minimization of
primary water consumption in industrial processes
and in the wastewater reduction from such processes
have contributed to the minimization of
environmental impacts. Instead of applying graphic
and algebraic technologies to solve the problems of
process integration, mathematical programming has
been used as a very convenient alternative method
when the subject can be formulated as an
optimization problem.
The problem of Water/Wastewater Allocation
Planning (WAP) can also consider both discrete and
continuous variables. A large group of WAP
problems have Mixed Integer Non-Linear
Programming (MINLP) and NLP formulations and a
great variety of algorithms has been proposed,
developed and improved.
The PSO algorithm was properly modified in
order to satisfy the requirements of leading with
discrete-type variables and other strategies were also
included to solve MINLP-based models. In addition,
as criteria for obtaining the synthesis of the reuse
water network, the minimization of the total cost
was applied.
2 WAP PROBLEM DEFINITION
AND MODEL FORMULATION
With regard to the total possible configurations of
mass transfer between the water streams and the
process streams and all the possibilities for reuse
water, a superstructure was built, as reported by
Trigueros et al. (2012), in order to attain
optimization of the mass exchange network project
in a simultaneous analysis procedure. A reduction in
the high contaminant loads of the process streams is
essentially performed by transferring mass to a
cleaner water stream, with the possibility of reusing
it in the other (N-1) process units.
In this work, maximum inlet and outlet pollutant
concentration data were used in the synthesis of the
reuse water network, calculating the maximum water
flow rate (Eq. 1) and demanding a global mass
balance (Eq. 2). The superstructure was fractioned in
small components corresponding to each process
unit, mixing and splitting nodes in which their
individual mass balances are defined by Equations
(3)–(5), respectively.
In addition, pollutant mass balances in the
process streams are also performed (Eqs. (6) and
(7)), and the maximum allowed pollutant
concentration constraints for the inlet and outlet of
each process unit, two inequalities (Eqs. 8 and 9). A
condition necessary to warrant no violation of the
minimum ΔCi, (see Eq.10), was demanded in each
226
A. S. S. Ravagnani M., E. G. Trigueros D., N. Módenes A. and Espinoza-Quiñones F..
Synthesis of Reuse Water Networks by PSO Approach.
DOI: 10.5220/0004157502260230
In Proceedings of the 4th International Joint Conference on Computational Intelligence (ECTA-2012), pages 226-230
ISBN: 978-989-8565-33-4
Copyright
c
2012 SCITEPRESS (Science and Technology Publications, Lda.)