out artificial respiration). During this task, the users
were prompted to activate the metronome’s acoustic
signal supporting the pace of thorax compressions,
and then to stop the signal. This task proved to be
error-prone. Only 32% of the participants recognized
the trigger of the metronome immediately when they
scrolled to the bottom of the diagram (cf. Figure 2).
41% had more difficulties and pressed the button
predefining the resuscitation beat only after an aver-
age of 6.3 seconds. 5% initiated the beat after more
than 10 seconds and 23% saw the trigger only after
instruction. Overall, 58% expressed the desire for
more directions given by the application itself. 47%
suggested that the trigger should be placed at a dif-
ferent place, for example directly next to the
graphics depicting the CPR procedure.
If not stopped manually, the metronome keeps
producing the beats. When asked to stop the acoustic
signal, 47% were able to fulfill this task within 3.2
seconds. Nevertheless 41% required 5 seconds or
longer to pause the metronome. 65% criticized the
button label shown while the metronome was active.
While the beats go on, no label referring to stopping
it is visible; instead, in case of artificial respiration,
the button shows the number of beats passed by
since the last breathing.
Several participants voiced misgivings regarding
controllability, since it took them quite some time to
find the trigger setting the resuscitation beat and
then to stop it again. Some participants criticized
that a user probably would not even expect a metro-
nome to set the CPR rhythm, if they had not been
made aware of the availability of this feature. Ten
participants suggested highlighting the metronome
trigger, for example by labeling it more clearly,
giving it a different color or adjusting the button
size.
One of the participants’ tasks was to change the
settings for CPR execution; that is, to indicate
whether the 100 beats per second should be inter-
rupted, after every 30 beats, by the spoken command
to apply mouth-to-mouth respiration (two breath-
ings: 30:2). 47% declared they immediately recog-
nized the button referring to the setting of resuscita-
tion beats (cf. Figure 2). 53% experienced difficul-
ties fulfilling the task of changing the CPR mode
(with or without artificial respiration). 26% of the
participants held the opinion that this facility for
alteration was not relevant, whereas 74% found it
important. Six participants criticized that the settings
button was insufficiently salient and desired a more
obvious labeling, for example a written identifica-
tion of the function of the button.
Three participants (medics) remarked that the du-
ration of time scheduled for mouth-to-mouth respira-
tion, which is set to three seconds, might not suffice
because the rescuer has to change body position
when starting artificial respiration. Several partici-
pants (medical personnel and laymen) remarked that
the option to alter CPR mode might in fact be ob-
structive and counterproductive. They argued that a
user might be overchallenged by the options of car-
diac-only resuscitation vs. CPR with mouth-to
mouth respiration. For them, a precise instruction
preinstalled in the application would be preferable.
One user opposed to the fact that the metronome
stops as soon as the user quits the menu section
“First Aid Measures” and, for example, returns to
the map searching for an AED. The rescuer is unable
to adjust CPR to the pace preset by the metronome
while seeking an AED. They might also not be able
to keep pace with the metronome rhythm, which
might entail severe consequences, as stated before.
(Other passers-by might happen to have the “Defi
Now!” application installed on their smartphones,
and activate the beat there.)
To sum up the findings regarding the second top-
level menu item, the task of setting the CPR mode
brought several problems to light concerning opera-
bility. Several participants were not satisfied with
the implementation of features such as the labels on
the buttons referring to the starting/stopping of the
resuscitation beat and CPR mode. They evaluated
these features as being not self-explanatory and
expected clearer labels for better usability. Moreover
they were not satisfied with the controllability since
it took them quite some time to find the trigger start-
ing the metronome settings—in about 70% of the
cases it took more than 6 seconds to get the acoustic
signal started. Many participants said that in case of
an emergency, they would waste time searching for
those specific functions, and remarked that these
should be implemented in a more eye-catching and
better comprehensible manner.
The test of the third top-level menu item “Find
an AED” unveiled several unfulfilled user expecta-
tion as regards the user interface. The app shows
either a tabular view or an interactive map, depend-
ing on which icon in the upper panel is selected (in
the upper panel of Figure 6, see the highlighted
buttons serving to switch between the two option).
41% of the participants stated they expected to find
this function within the menu section concerned with
adding a new AED location; 54% expected the tabu-
lar view under “Find an AED”. Seven participants
commented on the tabular-view button. In their
opinion, a written labeling would have marked the
ICEIS2013-15thInternationalConferenceonEnterpriseInformationSystems
96