Investigation of Sensor Parameters for Kinematic Assessment of Steady State Running Using Foot Mounted IMUs
G. P. Bailey, R. K. Harle
2014
Abstract
The continuous sensing of kinematics provides an opportunity to monitor changes in sporting technique or to aid in injury rehabilitation. Inertial sensors are now small enough to integrate into footwear, providing a potential platform for continuous monitoring that does not require additional components to be worn by the athlete and can be used to assess foot kinematics during running. To facilitate widespread adoption, sensor systems must be as cheap as possible. To achieve this it is required that such systems be engineered with sampling rates that are not unnecessarily high and with sensor components that meet the requirements of the task, including required accuracy. We investigate multiple sensor parameters (sampling rate, acceleration range) and their effect on the accuracy of kinematic assessment using foot worn inertial sensors. We find that Extended Kalman Filter based trajectory recovery seems to be little affected by sampling rates until below 250Hz. We investigate impact accelerations using an inertial measurement unit attached to the foot and find that, at 250Hz, the acceleration signal peaks at up to 70g around heel strike.
References
- Bailey, G. and Harle, R. (2014). Assessment of Foot Kinematics During Steady State Running Using a Footmounted IMU. Procedia Engineering, 72:32-37.
- Bichler, S., Ogris, G., Kremser, V., Schwab, F., Knott, S., and Baca, A. (2012). Towards high-precision IMU/GPS-based stride-parameter determination in an outdoor runners' scenario. In Procedia Engineering, volume 34, pages 592-597.
- Foxlin, E. (2005). Pedestrian tracking with shoe-mounted inertial sensors. IEEE Computer Graphics and Applications, 25(6):38-46.
- Harle, R., Taherian, S., Pias, M., Coulouris, G., Hopper, A., Cameron, J., Lasenby, J., Kuntze, G., Bezodis, I., Irwin, G., and Kerwin, D. G. (2011). Towards real-time profiling of sprints using wearable pressure sensors. Computer Communications.
- Mariani, B., Hoskovec, C., Rochat, S., Büla, C., Penders, J., and Aminian, K. (2010). 3D gait assessment in young and elderly subjects using foot-worn inertial sensors. Journal of Biomechanics, 43:2999-3006.
- Mizrahi, J. (2000). Effect of fatigue on leg kinematics and impact acceleration in long distance running. Human Movement Science, 19(2):139-151.
- Munoz Diaz, E., Heirich, O., Khider, M., and Robertson, P. (2013). Optimal sampling frequency and bias error modeling for foot-mounted IMUs. In International Conference on Indoor Positioning and Indoor Navigation, pages 1-9. IEEE.
- Peruzzi, A., Della Croce, U., and Cereatti, A. (2011). Estimation of stride length in level walking using an inertial measurement unit attached to the foot: A validation of the zero velocity assumption during stance. Journal of Biomechanics, 44:1991-1994.
Paper Citation
in Harvard Style
P. Bailey G. and K. Harle R. (2014). Investigation of Sensor Parameters for Kinematic Assessment of Steady State Running Using Foot Mounted IMUs . In Proceedings of the 2nd International Congress on Sports Sciences Research and Technology Support - Volume 1: icSPORTS, ISBN 978-989-758-057-4, pages 154-161. DOI: 10.5220/0005093601540161
in Bibtex Style
@conference{icsports14,
author={G. P. Bailey and R. K. Harle},
title={Investigation of Sensor Parameters for Kinematic Assessment of Steady State Running Using Foot Mounted IMUs},
booktitle={Proceedings of the 2nd International Congress on Sports Sciences Research and Technology Support - Volume 1: icSPORTS,},
year={2014},
pages={154-161},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005093601540161},
isbn={978-989-758-057-4},
}
in EndNote Style
TY - CONF
JO - Proceedings of the 2nd International Congress on Sports Sciences Research and Technology Support - Volume 1: icSPORTS,
TI - Investigation of Sensor Parameters for Kinematic Assessment of Steady State Running Using Foot Mounted IMUs
SN - 978-989-758-057-4
AU - P. Bailey G.
AU - K. Harle R.
PY - 2014
SP - 154
EP - 161
DO - 10.5220/0005093601540161