Angular Arrangement Optimization of the Support Racks of Gas Turbine Engine to Reduce the Circumferential Unevenness of Gas Flow

Grigorii M. Popov, Daria Kolmakova, Aleksandr O. Shklovets

2015

Abstract

This work is motivated by the necessity to reduce the effects of the flow circumferential distortion in the flow passage of the aircraft gas turbine engine (GTE). During the presented research, another principal of reduction of the flow circumferential distortion was chosen. Firstly, the variants of upgrading the existing support racks were found. Secondly, the new design of support was offered. Both version of the support design variation took into account the availability of technological and structural limitations associated with the location of oil pipes, springs and others elements in the support racks. Investigations of modified design showed that the support with altered racks provides a reduction of dynamic stresses by 20% at resonance with the most dangerous harmonic, and the new design of support can give the decrease of 30%.

References

  1. Popov, G., Baturin, O., Kolmakova, D. Krivcov, A., 2014. Improvement Results of TK-32 turbocompressor turbine with gas-dynamics and strength CAE-systems. In International J. of Engineering and Technology Vol. 6, pp. 2297-03.
  2. Shabliy, L.S., Cherniaev, A.V., 2014. Optimization of compressor blade geometry for efficiency and pressure ratio under strength constraint. In Proc. of ASME 2014 Gas Turbine India Conference, GTINDIA 2014, GTINDIA2014-8132.
  3. Ermakov, A., Shklovets, A., Popov, G., Kolmakova, D., 2014. Investigation of the effect of the gas turbine compressor supports on gas flow circumferential nonuniformity. In Research J.l of Applied Sciences, vol. 9, pp. 684-690.
  4. JSC "Kuznetsov", Accessed October 10, 2014. http://www.kuznetsov-motors.ru/en.
  5. Egorov, I., Kretinin, G., Leshchenko, I., Kuptzov, S., 2002. IOSO Optimisation Toolkit - Novel Software to Create Better Design. In Proc. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimisation.
  6. Saren, V., 1984. Flow around irregular lattice of plates placed in front of the cylinder, Technical Report, Central Institute of Aviation Motors, Moscow.
  7. Pechenin, V.A., Bolotov, M.A., Rusanov, N.V., 2014. Method of evaluation of profile form and shaped surfaces with application of wavelets. In Research Journal of Applied Sciences, Vol. 9 (11), pp. 820-824.
Download


Paper Citation


in Harvard Style

M. Popov G., Kolmakova D. and O. Shklovets A. (2015). Angular Arrangement Optimization of the Support Racks of Gas Turbine Engine to Reduce the Circumferential Unevenness of Gas Flow . In Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH, ISBN 978-989-758-120-5, pages 383-388. DOI: 10.5220/0005570403830388


in Bibtex Style

@conference{simultech15,
author={Grigorii M. Popov and Daria Kolmakova and Aleksandr O. Shklovets},
title={Angular Arrangement Optimization of the Support Racks of Gas Turbine Engine to Reduce the Circumferential Unevenness of Gas Flow},
booktitle={Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH,},
year={2015},
pages={383-388},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005570403830388},
isbn={978-989-758-120-5},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SIMULTECH,
TI - Angular Arrangement Optimization of the Support Racks of Gas Turbine Engine to Reduce the Circumferential Unevenness of Gas Flow
SN - 978-989-758-120-5
AU - M. Popov G.
AU - Kolmakova D.
AU - O. Shklovets A.
PY - 2015
SP - 383
EP - 388
DO - 10.5220/0005570403830388