Adaptive Control of Mobile Manipulator Robot based on Virtual Decomposition Approach

Abdelkrim Brahmi, Maarouf Saad, Guy Gauthier, Wen-Hong Zhu, Jawhar Ghommam

2016

Abstract

This paper presents an adaptive control scheme for a mobile manipulator robot based on the virtual decomposition control (VDC). The control strategy was tested on three degrees of freedom manipulator arm mounted on two degrees of freedom mobile platform to track a desired trajectory. The desired trajectory is obtained from the workspace trajectory using the inverse kinematics. Differently to the known decentralized control that divides the mobile manipulator into two subsystems, in this paper, the mobile manipulator has N degrees of freedom, divided virtually into N subsystems. The applicability of the proposed scheme is demonstrated in real time validation. The experimental results show the effectiveness of the VDC approach.

References

  1. Aviles, L. A. Z., J. C. P. Ortega and E. G. Hurtado (2012). "Experimental Study of the Methodology for the Modelling and Simulation of Mobile Manipulators.", International Journal of Advanced Robotic Systems, Vol 9, 192.
  2. Brahmi, A., M. Saad, G. Gauthier, W.-H. Zhu and J. Ghommam (2013). Real time control of ANAT robot manipulator using virtual decomposition approach. IEEE, 3rd International Conference on Systems and Control (ICSC).
  3. Chen, H., Y. Zhao and J.-m. Lee (2015). " LQR control for a Mobile Manipulator using COG feedback. " IEEE, International Conference on Advanced Intelligent Mechatronics (AIM) .
  4. Chen, N., F. Song, G. Li, X. Sun and C. Ai (2013). "An adaptive sliding mode backstepping control for the mobile manipulator with nonholonomic constraints." Communications in Nonlinear Science and Numerical Simulation 18(10): 2885-2899.
  5. Chung, J. H. and S. A. Velinsky (1998). "Modeling and control of a mobile manipulator." Robotica 16(06): 607-613.
  6. Dong, W. (2002). "On trajectory and force tracking control of constrained mobile manipulators with parameter uncertainty." Automatica 38(9): 1475-1484.
  7. Galicki, M. (2012). "Control of mobile manipulators in a task space." Automatic Control, IEEE Transactions on 57(11): 2962-2967.
  8. Ge, W., D. Ye, W. Jiang and X. Sun (2008). Sliding mode control for trajectory tracking on mobile manipulators. IEEE Asia Pacific Conference on Circuits and Systems, APCCAS .
  9. Mai, T.-L. and Y. Wang (2014). "Adaptive-backstepping force/motion control for mobile-manipulator robot based on fuzzy CMAC neural networks." Control Theory and Technology 12(4): 368-382.
  10. Ngo, M., N. Phuong, V. Duy, H. Kim and S. Kim (2007). "Control of two wheeled welding mobile manipulator." International Journal of Advanced Robotics System 4(3): 293-302.
  11. Peng, J., J. Yu and J. Wang (2014). "Robust adaptive tracking control for nonholonomic mobile manipulator with uncertainties." ISA transactions 53(4): 1035- 1043.
  12. Seraji, H. (1998). "A unified approach to motion control of mobile manipulators." The International Journal of Robotics Research 17(2): 107-118.
  13. Song, Z., D. Zhao, J. Yi and X. Li (2005). Tracking control of mobile manipulator with dynamical uncertainties. IEEE/RSJ, International Conference on, Intelligent Robots and Systems (IROS 2005).
  14. Tan, J. and N. Xi (2001). Integrated sensing and control of mobile manipulators. In Proceedings of IEEE/RSJ, International Conference on, Intelligent Robots and Systems.
  15. Wu, K. and W. Sun (2014). Adaptive tracking control for a new mobile manipulator model. IEEE, International Conference on Control (UKACC).
  16. Wu, X., Y. Wang and X. Dang (2014). "Robust adaptive sliding-mode control of condenser-cleaning mobile manipulator using fuzzy wavelet neural network." Fuzzy Sets and Systems 235: 62-82.
  17. Yamamoto, Y. and X. Yun (1994). Modeling and compensation of the dynamic interaction of a mobile manipulator. Proceedings of IEEE, International Conference on, Robotics and Automation.
  18. Zhu, W.-H. (2010). Virtual Decomposition Control: Toward Hyper Degrees of Freedom Robots, Springer Science & Business Media.
Download


Paper Citation


in Harvard Style

Brahmi A., Saad M., Gauthier G., Zhu W. and Ghommam J. (2016). Adaptive Control of Mobile Manipulator Robot based on Virtual Decomposition Approach . In Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO, ISBN 978-989-758-198-4, pages 254-261. DOI: 10.5220/0005975402540261


in Bibtex Style

@conference{icinco16,
author={Abdelkrim Brahmi and Maarouf Saad and Guy Gauthier and Wen-Hong Zhu and Jawhar Ghommam},
title={Adaptive Control of Mobile Manipulator Robot based on Virtual Decomposition Approach},
booktitle={Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,},
year={2016},
pages={254-261},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005975402540261},
isbn={978-989-758-198-4},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,
TI - Adaptive Control of Mobile Manipulator Robot based on Virtual Decomposition Approach
SN - 978-989-758-198-4
AU - Brahmi A.
AU - Saad M.
AU - Gauthier G.
AU - Zhu W.
AU - Ghommam J.
PY - 2016
SP - 254
EP - 261
DO - 10.5220/0005975402540261