Object Slippage Prevention using Different Control Strategies

Pavel Dzitac, Abdul Md Mazid, Guy Littlefair, Ashwin Polishetty

2016

Abstract

This paper presents experimental results obtained using a friction-based slippage and tangential force sensing device that has been developed for the purpose of reliable object slippage prevention during robotic manipulation. The experimental results obtained demonstrate that the developed slippage sensing strategy is rugged and reliable even in its current “rough prototype” state of development. This work has the potential to yield a low cost and highly customisable slippage and tangential force sensing device for a variety of robotic object grasping and manipulation applications. It is envisaged that the work presented here will be beneficial to researchers in the area of object slippage prevention.

References

  1. Tremblay M. R., Cutkosky M. R., 1993. “Estimating Friction Using Incipient Slip Sensing During a Manipulation Task,” In Proceedings of IEEE International Conference on Robotics and Automation, Atlanta (GA).
  2. Bowden F. P., Tabor D., 1986. The Friction and Lubrication of Solids, UK: Oxford Science Press.
  3. Petchartee S., Monkman G., 2007. “Pre-slip detection based Tactile Sensing,” In Proceedings of International Conference on Sensors, Sensor Networks and Information, Toulouse.
  4. Mingrino A., Bucci A., Magni R., Dario P., 1994. “Slippage Control in Hand Prostheses by sensing Grasping Forces and Sliding Motion,” In Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems.
  5. Canepa G., Campanella M., Rossi D., 1994. “Slip Detection by a Tactile Neural Network,” In Proceedings of IEEE/RSJ Internationl Conference on Intelligent Robots and Systems.
  6. Pelossof R., Miller A., Allen P., Jebara T., 2004. “An SVM Learning Approach to Robotic Grasping,” In Proceedings of International Conference on Robotics and Automation.
  7. Dubey V. N., Crowder R. M., 2006. “A dynamic tactile sensor on photoelastic effect,” Sensors and Actuators, no. 128, pp. 217-224.
  8. Watanabe N., Obinata G., 2007. “Grip Force Control Based on the Degree of Slippage Using Optical Tactile Sensor,” In International Symposium on MicroNanoMechatronics and Human Science.
  9. Abdo J., Tahat M., Abouelsoud A. A., 2009. “The effect of excitation frequencies on stick-slip amplitude,” In Proceedings of International Conference on Integrity, Reliability and Failure, Porto (Portugal).
  10. Russel R. A., 1990. Robot Tactile Sensing, New York: Prentice Hall.
  11. Choi B., Cho H. Kang R., S., 2005. “Development of tactile sensor for detecting contact force and slip,” In Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, Edmonton.
  12. Rossiter J., Mukai T., 2005. “A Novel Tactile Sensor Using a Matrix of LEDs Operating in Both Photoemitter and Photodetector Modes,” In Proceedings of 2005 IEEE Conference on Sensor.
  13. Dahiya R. S., Metta G., Valle M., Sandini G., 2010. “Tactile Sensing - From Humans to Humanoids,” IEEE Transactions on Robotics, vol. 26, no. 1.
  14. Dzitac P., Mazid A. M., 2012. “A method to control grip force and slippage for robotic object grasping and manipulation”, In MED 2012 Proceedings of the Control and Automation Mediterranean conference, Barcelona, Spain. pp. 116-121.
  15. Dzitac P., Mazid A. M., Littlefair G., Polishetty A., 2014. “The Effective Radius and Resistance to Slippage”, In Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2014), Vienna, Austria.
  16. Dzitac P., Mazid A. M., Littlefair G., Polishetty A., 2014. “Robotic Grasping and Manipulation Controller Framework - Architecture Redevelopment”, In Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2014), Vienna, Austria.
Download


Paper Citation


in Harvard Style

Dzitac P., Md Mazid A., Littlefair G. and Polishetty A. (2016). Object Slippage Prevention using Different Control Strategies . In Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO, ISBN 978-989-758-198-4, pages 559-566. DOI: 10.5220/0006003505590566


in Bibtex Style

@conference{icinco16,
author={Pavel Dzitac and Abdul Md Mazid and Guy Littlefair and Ashwin Polishetty},
title={Object Slippage Prevention using Different Control Strategies},
booktitle={Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},
year={2016},
pages={559-566},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0006003505590566},
isbn={978-989-758-198-4},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,
TI - Object Slippage Prevention using Different Control Strategies
SN - 978-989-758-198-4
AU - Dzitac P.
AU - Md Mazid A.
AU - Littlefair G.
AU - Polishetty A.
PY - 2016
SP - 559
EP - 566
DO - 10.5220/0006003505590566