The Foot Feature Measurement System and Its Application to
Postural Stability of Healthy Subjects
Kyung-Ryoul Mun
1
, Sungkuk Chun
1
, Hyungan Oh
1
, Yunjung Kang
2
, Junggi Hong
2
and Jinwook Kim
1
1
Imaging Media Research Center, Korea Institute of Science and Technology, 136791 Seoul, Republic of Korea
2
Department of Physical Education, Kookmin Univeristy, Seoul, Republic of Korea
Keywords: Foot Feature Measurement System, Medial Longitudinal Arch, Lateral Longitudinal Arch.
Abstract: In this study we aimed to develop a foot feature measurement system (FFMS) being able to simultaneously
extract foot feature parameters in both static and dynamic condition. In addition, we investigated how these
foot features are associated to the postural stability through human experiments as this is one of the most
important requirements for natural and aesthetic gait pattern. From all thirteen subjects participated in this
study, this foot arch mechanism were clearly observed. It indicates that observation of LLA and area of MLA
curves is important to investigate postural stability in accordance with the different type of foot arches. For
the conclusion, foot anatomical characteristics such as height and the area of each arch curves can be observed
in both static and dynamic condition using the FFMS. In addition, it can be concluded that the FFMS can
provide more precise and various foot information by considering the LLA during both static and dynamic
condition.
1 INTRODUCTION
Recently, studies on designing subject-specific shoes
and insoles have been actively proceeded, to decrease
an impact force and stress applied at foot and to
increase a performance of the sports related
movements. Especially, a foot mechanism which is
static and dynamic changes of foot arch is the most
important factor to determine the performance of gait
and other activities. Thus, identifying this mechanism
is necessary for establishing the design of
personalized shoe insole. The foot arch, comprised of
medial longitudinal arch (MLA), lateral longitudinal
arch (LLA), and transverse arch, significantly
contributes to the body weight support, shock
absorption, body propulsion, and postural control
during walking and running (Wright et al., 2012,
Daentzer et al., 1997, Chang et al., 2014). However,
most of currently available personalized insoles are
generally manufactured by contemplating the
structure of MLA in static condition without
considering the LLA structure and dynamic
circumstances (Shirmohammadi and Ferrero, 2014,
Uhm et al., 2015, Coudert et al., 2006).
Therefore in this study we aimed to develop a foot
feature measurement system (FFMS) being able to
simultaneously extract foot feature parameters such
as foot length, foot width, the height of MLA and
LLA in both static and dynamic condition. In
addition, we investigated how these foot features are
associated to the postural stability through human
experiments as this is one of the most important
requirements for natural and aesthetic gait pattern.
2 METHODS
The FFMS system is shown in Fig 1. Overall FFMS
is composed of a measurement system and analysis
modules. The measurement system is comprised of a
runway and a scanning stage. The runway is a
wooden structure of 200cm (length) x 70cm (width)
x 45cm (height), and the scanning stage is composed
of a depth camera embedded underneath the
transparent acrylic panel and four uni-axial force
sensors at corners of the panel. The depth camera is
built in to measure morphological characteristics of
foot and geometric structure of the foot arch, while
the force sensors are set up to investigate the stability
of movements which is a center of pressure (CoP) of
the foot (Fig. 1B). All the obtained images and CoP
data were stored in an in-house developed software.