Study on Frictional Properties of Micro-texture Obtained by Ultrasonic Elliptical Vibration Cutting

Guowen Peng, Dong Lu, Mingming Yang, Jiang Zeng

2018

Abstract

Because the influence of cutting parameters on the performance of ultrasonic micro texture of radial sliding bearing hydrodynamic lubrication is significant, this paper is concerned with the study of elliptic ultrasonic vibration cutting on AL6061 bar by single factor experiment. The cutting speed, feed rate, and ultrasonic vibration direction are all taken into account, and co rotating friction wear experimental device is employed to measure the hydrodynamic lubrication friction test at different spindle speeds. The results show that the friction coefficient of the texture surface decreases significantly compared with the non textured surface, and the maximum value decreases by 34.4%. Moreover, it turns out that the increase of feed rate leads to the decrease of the friction coefficient. The final observation is that the friction coefficient will also decrease with the increase of spindle speed.

Paper Citation

in Harvard Style

Peng G., Lu D., Yang M. and Zeng J. (2018). Study on Frictional Properties of Micro-texture Obtained by Ultrasonic Elliptical Vibration Cutting.In Proceedings of the 2nd International Conference on Intelligent Manufacturing and Materials - Volume 1: ICIMM, ISBN 978-989-758-345-2, pages 348-353. DOI: 10.5220/0007531603480353

in Bibtex Style

@conference{icimm18,
author={Guowen Peng and Dong Lu and Mingming Yang and Jiang Zeng},
title={Study on Frictional Properties of Micro-texture Obtained by Ultrasonic Elliptical Vibration Cutting},
booktitle={Proceedings of the 2nd International Conference on Intelligent Manufacturing and Materials - Volume 1: ICIMM,},
year={2018},
pages={348-353},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0007531603480353},
isbn={978-989-758-345-2},
}

in EndNote Style

TY - CONF

JO - Proceedings of the 2nd International Conference on Intelligent Manufacturing and Materials - Volume 1: ICIMM,
TI - Study on Frictional Properties of Micro-texture Obtained by Ultrasonic Elliptical Vibration Cutting
SN - 978-989-758-345-2
AU - Peng G.
AU - Lu D.
AU - Yang M.
AU - Zeng J.
PY - 2018
SP - 348
EP - 353
DO - 10.5220/0007531603480353