For the process dimension, the health status of Shenzhen’s urban ecosystem is relatively low,
indicating that Shenzhen's ecosystem is not able to communicate smoothly with its external and
internal subsystems. Moreover, the efficiency of this process is relatively low. Of the investigated
cities, the environmental load ratio, emergy input and self-emergy ratio of Shenzhen were much
higher than those of other cities, whereas its emergy exchange ratio was lower. The environment load
ratio reflects the pressure exerted by a developing system on the natural environment. Our findings
indicated that Shenzhen’s natural environment is under great pressure. Consequently, there is a need
to change the previous approach that prioritized economic benefits achieved through a reduction of
environmental benefits and to strengthen environmental protection and resource conservation. The
economic development of the urban system must demonstrate high levels of efficiency and
competitiveness. It must also entail free renewable resources and a rational mix of purchased
resources that are of high quality in terms of energy. A higher emergy input and self-emergy ratio
will reduce the competitiveness of the urban ecosystem. The emergy exchange ratio reflects the
benefits and losses of the system relating to foreign exchanges. In developed countries or regions of
the world, this ratio is generally greater than 1. However, Shenzhen’s emergy exchange ratio is 0.16,
which means that emergy wealth lost in foreign trade is higher than the emergy wealth that is
received. This indicates that the emergy wealth of the urban ecosystem is always flow ing out. For the
system dimension, the two index values for emergy sustainable indices and emergy index for
sustainable development were very low, indicating that Shenzhen’s overall system demonstrates a
low level of sustainable development of the ecological-economic system that has remained under the
shadow of economic prosperity as the key goal.
3.2.2. Suggestions aimed at enhancing Shenzhen’s urban ecosystem health. In light of the above
analysis focusing on Shenzhen’s urban ecosystem health, we offer the following suggestions for
improving the health of urban ecosystems in Shenzhen:
The concept of green development should be established, which entails strengthening
environmental protection, pollution control, ecological construction, and supervision of
environmental protection. In addition, there is a need to improve the environmental
infrastructure, and relieve pressure on the city's natural environment.
Trade import and export projects need to be adjusted. Exports of raw resource products
should be reduced, with export as much as possible to final products, input high-value
technology, culture, and education.
Independent innovations should be prioritized, and sustained efforts should focus on
developing new energy sources along with energy-saving and environmental protection
approaches. Further, efforts should be made to develop other strategic emerging industries
and modern service industries and to improve the social and economic benefits exchanged
under unit environmental pressure. Such initiatives would contribute to optimizing the
system’s performance in relation to sustainable development.
4. Conclusions
In order to promote the construction of Belt and Road, it is necessary to understand the strength and
weakness of the Chinese cities along the Belt and Road, based on which reasonable planning can be
determined to guide the long-term construction. Aiming at the status quo that there is a lack of
comprehensive evaluation for cities along the Belt and Road, urban ecosystem health was selected as
the unified media to diagnose the situation of different cities in this paper. According to our
re-understanding of urban ecosystem health, we first proposed an original assessment framework of
Structure-Function-Process-System, and then introduced emergy analysis to establish concrete
indicators of urban ecosystem health assessment.
IWEMSE 2018 - International Workshop on Environmental Management, Science and Engineering
566