Analysis of the Effect of AISI 1005 Grain Structure and Cutting Angle on Springback Using the V-Bending Method

Heri Setiawan, Rani Nopriyanti, Selvi S.

2022

Abstract

Many considerations exist in a process of bending, plate material (product) will change the angle and radius bend dimension called springback. As a result, the process of forming the product experiences a mismatch/change in terms of dimensions. The direction of cutting the rolling plate for the product is often ignored by the operator in the manufacturing process. However, the use of grain structure parameters in the direction of cutting the rolling plate may have an effect to minimize the amount of springback. Springback itself occurs in almost all forming processes (bending, forming, deep drawing, etc.) on sheet metal. The analysis was carried out by v -bending using the test using a test specimen that has dimensions of 1.87 × 35 × 150, bending angle of 90°, bending radius of R8.465 mm, and clearance between punch bending and die bending is equal to the plate thickness (1.87 mm), and with plate material AISI 1005, and tested with variable cutting angles from the direction of rolling the plates using the machine press AIDA direct servo formers DSF-C1-A series. The results of the analysis state that the amount of springback due to the variable cutting angle from the rolling direction of the plate affects the amount of springback. The amount of springback from the direction parallel to the rolling angle of the plate gets a positive value of 1.148°, then the perpendicular angle with a value of negative 1.431°, and the springback largest is 45° from rolling with a value of negative 1.716°.

Paper Citation

in Harvard Style

Setiawan H., Nopriyanti R. and S. S. (2022). Analysis of the Effect of AISI 1005 Grain Structure and Cutting Angle on Springback Using the V-Bending Method. In Proceedings of the 5th International Conference on Applied Science and Technology on Engineering Science - Volume 1: iCAST-ES; ISBN 978-989-758-619-4, SciTePress, pages 567-572. DOI: 10.5220/0011821600003575

in Bibtex Style

@conference{icast-es22,
author={Heri Setiawan and Rani Nopriyanti and Selvi S.},
title={Analysis of the Effect of AISI 1005 Grain Structure and Cutting Angle on Springback Using the V-Bending Method},
booktitle={Proceedings of the 5th International Conference on Applied Science and Technology on Engineering Science - Volume 1: iCAST-ES},
year={2022},
pages={567-572},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0011821600003575},
isbn={978-989-758-619-4},
}

in EndNote Style

TY - CONF

JO - Proceedings of the 5th International Conference on Applied Science and Technology on Engineering Science - Volume 1: iCAST-ES
TI - Analysis of the Effect of AISI 1005 Grain Structure and Cutting Angle on Springback Using the V-Bending Method
SN - 978-989-758-619-4
AU - Setiawan H.
AU - Nopriyanti R.
AU - S. S.
PY - 2022
SP - 567
EP - 572
DO - 10.5220/0011821600003575
PB - SciTePress