Design and Analysis Go-Kart Chassis with Rear Movement on 150cc Motor Engine

Sri Susilowati, Hendrickues Fernando

2022

Abstract

Go-kart is a type of sports car, open vehicle, four wheeler, or quadracycle. The Go-kart chassis experiences loads from, the engine, drivers and the mass of the chassis itself. In this design, the Go-kart frame is made using hollow iron material 40 x 12mm, 1.2mm thick with a rear-wheel drive engine with a capacity of 150cc combustion chamber. Steel plate material is used using SMAW welding with welding wire RB E6013 2.6mm with a current of 70A, welding position 1G (or flat position). The test is carried out with the Universal Tensile Testing Machine, the material is pulled past the maximum stretch elasticity limit until the test object finally reaches the limit (break). Tensile testing takes approximately 3-5 minutes with a load of 10-20N. For the chassis frame, the strength is done by knowing the magnitude of the bending moment acting on the chassis frame and the maximum bending stress that occurs. With a driver’s weight of 55 kg, the flexural stress received is 300kg.m, and the maximum flexural stress received by the chassis is 0.4477kg/cm2, which is smaller than the allowable stress for the material 5.7kg/cm2. From these results, the chassis design is considered safe.

Paper Citation

in Harvard Style

Susilowati S. and Fernando H. (2022). Design and Analysis Go-Kart Chassis with Rear Movement on 150cc Motor Engine. In Proceedings of the 3rd International Seminar and Call for Paper (ISCP) UTA ’45 Jakarta - Volume 1: ISCP UTA'45 Jakarta; ISBN 978-989-758-654-5, SciTePress, pages 307-311. DOI: 10.5220/0011980400003582

in Bibtex Style

@conference{iscp uta'45 jakarta22,
author={Sri Susilowati and Hendrickues Fernando},
title={Design and Analysis Go-Kart Chassis with Rear Movement on 150cc Motor Engine},
booktitle={Proceedings of the 3rd International Seminar and Call for Paper (ISCP) UTA ’45 Jakarta - Volume 1: ISCP UTA'45 Jakarta},
year={2022},
pages={307-311},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0011980400003582},
isbn={978-989-758-654-5},
}

in EndNote Style

TY - CONF

JO - Proceedings of the 3rd International Seminar and Call for Paper (ISCP) UTA ’45 Jakarta - Volume 1: ISCP UTA'45 Jakarta
TI - Design and Analysis Go-Kart Chassis with Rear Movement on 150cc Motor Engine
SN - 978-989-758-654-5
AU - Susilowati S.
AU - Fernando H.
PY - 2022
SP - 307
EP - 311
DO - 10.5220/0011980400003582
PB - SciTePress