In the case of primary open-angle glaucoma
(POAG), even in its early stages, changes of blood
flow are observed in all parts of the eye
(Cherecheanu, 2013). As is well known, this disease
is one of the leading causes of blindness (Quigley,
2006). Currently, the pathogenesis of POAG is
mostly associated with increased individual level of
intraocular pressure (IOP). Increased IOP damages
the optic nerve fibers and cells of the retina, which
gradually leads to an irreversible loss of vision.
However, not only an into lerable IOP level but also
other factors can lead to the development and
progression of POAG. One of the risk factors of
progressive visual impairment due this disease is a
decrease in the blood supply level in the vessels of the
brain and the eye (Schmetterer, 2015). Eye
hemodynamics monitoring in POAG patients may
give useful diagnostic information for glaucoma
clinicians.
A number of studies, described in (Luzhnov,
2018), were carried out on the analysis of TP ROG
signals in patients with POAG. It was shown that the
estimation of amplitude parameters became more
informative if waveform analysis is used. So, the
analysis of electrical impedance signals in POAG
must include a qualitative and quantitative estimation.
A qualitative analysis of signals includes determining
the type of the pulse wave. It is affected by
biophysical, biomechanical and hydrodynamic
factors, which subsequently determine the diagnostic
result in the qualitative analysis of signals. At the
moment, the analysis of the pulse wave shape in TP
ROG is carried out using attractors (Luzhnov, 2018).
This analysis allows indirect evaluation of blood flow
in different parts of the eye, as well as their interaction
with each other. On the whole, however, the issue of
quantitative determination of blood flow indices in all
(not only the anterior) parts of the eye using non-
invasive electrical impedance methods remains
unresolved. It is especially vital for early diagnosis of
POAG and differentiation of the POAG stages.
The aim of this work, therefore, is to develop the
ROG technique, which could ensure quantitative
analysis of electrical impedance signals of the
posterior part of the eye in patients with POAG,
including the possibility of early diagnosis of the
disease and differentiation between its stages.
2 MATERIALS AND METHODS
Currently, various methods are used to study the
blood supply of eye structures (Kurysheva, 2017).
The electrical impedance diagnostic method allows a
comprehensive assessment of blood flow state in the
eye vessels as a whole, in contrast to research
methods that determine the blood supply of each
vessel individually. The technique of TP ROG
involves a quantitative assessment of blood supply at
the depth of sounding corresponding to the anterior
part of the eye (Luzhnov, 2015). Therefore, a new
technique for applying electrodes for the assessment
of posterior eye pole hemodynamic parameters of
POAG patients was used in the present work.
To reach the posterior eye pole vascular bed
(Roebuck, 2015), the estimated sounding depth
should be increased. Accordingly, we used increased
distance between the ROG measuring electrodes, and
their location was changed: the axis of symmetry was
rotated 90° relative to that used in the previous ROG
technique and was located vertically rather than
horizontally (see Fig.1).
The vertical orientation with the arrangement of
four electrodes (a pair of current electrodes and a pair
of measuring ones) in the tetrapolar system of leads
allowed us to provide the desired interelectrode
distance during its superimposition. The distance
between the electrodes was controlled by a rigid
fastening system, made similarly to the method
described in (Kiseleva, 2020).
To register the TP ROG signal, a semi-rigid
substrate was used for attaching the electrodes. A pair
of measuring electrodes was located at a distance of
13 mm from each other. This enables measuring the
blood flow at a distance corresponding to the anterior
part of the eye. To register the ROG PP signal, we use
an ABS plastic plate with holes for electrodes. A pair
of ROG PP measuring electrodes is spaced 60 mm
apart. Thanks to this arrangement we are able to
measure blood flow at the depth corresponding to the
posterior pole of the eye. Such system parameters
enable the registration of an electrical impedance
signal produced by blood supply of both the posterior
and the anterior part of the eye.
The distance between the round electrodes was
considered the distance between their centres, or
attachment points. In preliminary studies, the selected
methods of applying electrodes to adult patients and
children aged 8 years or older were tested. The
accuracy of positioning and the quality of electrode
placement made it possible to register ROG signals
for subsequent analysis of ocular blood flow.
To register the signals, an impedance measuring
transducer with a probe current frequency of 100 kHz
was used. The signal analysis of the ROG pulse blood
supply was carried out after filtering the obtained
electrical impedance signal with a Butterworth
fourth-order band-pass filter with a lower cut-off