ON THE USE OF OPTIMIZATION METHODS FOR THE MINIMIZATION OF FERTILIZER APPLICATION ERROR WITH CENTRIFUGAL SPREADERS

Teddy Virin, Jonas Koko, Emmanuel Piron, Philippe Martinet

2006

Abstract

Fertilizer application is one of the most important operations in agricultural production. Thanks to their low cost and robustness, centrifugal spreaders are widely used to carry out this task. However, when distances between successive paths followed by the tractor in the field are not constant, application errors occur. These ones generally cause waters pollution and economic issues. In this paper, to limit harmful environmental effects and disastrous drop in production due to centrifugal spreading, we propose an approach based on optimization techniques to improve the fertilization quality. An optimization criterion relying on a spatial distribution model, obtained in previous works, is considered. To compute optimal parameters which should be used as reference variables for the control of the spreader in the future, mechanical constraints are introduced. Faced with a large scale problem, we use an augmented lagrangian algorithm combined with a l-bfgs technique. Simulations results show low application error values comparing to fertilization inaccuracies found without optimization.

References

  1. Bertsekas, D. P. (1982). Constrained Optimization and Lagrange Multipliers Methods. Academic Press, New York.
  2. Bruxelles (2005). Mise en oeuvre de la directive 91/676/cee - pollution par les nitrates a partir de sources agricoles.
  3. Byrd, R. H., Nocedal, J., and Schnabel, R. B. (1994). Representations of quasi-newton matrices and their use in limited memory methods. Mathematical Programming, 63:129-156.
  4. Dillon, C. R., Shearer, S., Fulton, J., and Kanakasabai, M. (2003). Optimal path nutrient application using variable rate technology. In Proc. of the Four th European Conference on Precision Agriculture, pages 171-176.
  5. Isherwood, K. F. (1998). Mineral Fertilizer Use and the Environment. IFA.
  6. ISO (1985). ISO 5690/1 Equipment for distributing fertilizers - Test methods - Part 1: Full width fertilizer distributors. International Organization for Standardization, Geneve.
  7. Olieslagers, R. (1997). Fertilizer distribution modelling for centrifugal spreader design. PhD thesis, K.U. Leuven.
  8. Yule, I., Lawrence, H., and Murray, R. (2005). Performance of fertiliser spreading equipment for precision agriculture applications. In 1st International Symposium on Centrifugal Fertiliser Spreading, pages 10-18.
Download


Paper Citation


in Harvard Style

Virin T., Koko J., Piron E. and Martinet P. (2006). ON THE USE OF OPTIMIZATION METHODS FOR THE MINIMIZATION OF FERTILIZER APPLICATION ERROR WITH CENTRIFUGAL SPREADERS . In Proceedings of the Third International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO, ISBN 978-972-8865-59-7, pages 124-129. DOI: 10.5220/0001212501240129


in Bibtex Style

@conference{icinco06,
author={Teddy Virin and Jonas Koko and Emmanuel Piron and Philippe Martinet},
title={ON THE USE OF OPTIMIZATION METHODS FOR THE MINIMIZATION OF FERTILIZER APPLICATION ERROR WITH CENTRIFUGAL SPREADERS},
booktitle={Proceedings of the Third International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},
year={2006},
pages={124-129},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0001212501240129},
isbn={978-972-8865-59-7},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Third International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,
TI - ON THE USE OF OPTIMIZATION METHODS FOR THE MINIMIZATION OF FERTILIZER APPLICATION ERROR WITH CENTRIFUGAL SPREADERS
SN - 978-972-8865-59-7
AU - Virin T.
AU - Koko J.
AU - Piron E.
AU - Martinet P.
PY - 2006
SP - 124
EP - 129
DO - 10.5220/0001212501240129