AN EVALUATION OF CASE HANDLING SYSTEMS FOR PRODUCT BASED WORKFLOW DESIGN

Irene Vanderfeesten, Hajo A. Reijers, Wil M. P. van der Aalst

2007

Abstract

Case handling systems offer a solution to the lack of flexibility and adaptability in workflow management systems. Because they are data driven they potentially provide good support for Product Based Workflow Design (PBWD). In this paper we investigate to which degree current case handling systems (FLOWer and Activity Manager) are able to support PBWD. This is done by elaborating the design process of a case from industry in both systems. From this evaluation we concluded that current case handling systems are not yet completely ready for supporting PBWD. Therefore, we recognize that better tool support is needed to make PBWD more suitable for practical use.

References

  1. Aalst, W.M.P. van der, 1999. On the automatic generation of workflow processes based on product structures. Computers in Industry, 39, pp. 97-111.
  2. Aalst, W.M.P. van der, Berens, P.J.S., 2001. Beyond workflow management: product-driven case handling. In Ellis, S., Rodden, T., and Zigurs, I., editors, International ACM SIGGROUP Conference on Supporting Group Work (GROUP 2001), pp. 42-51, ACM Press, New York.
  3. Aalst, W.M.P. van der, Hee, K.M. van, 2002. Workflow management: models, methods, and systems. MIT press, Cambridge, MA.
  4. Aalst, W.M.P. van der, Hofstede, A.H.M. ter, 2005. YAWL: Yet Another Workflow Language. Information Systems, 30 (4), pp. 245-275.
  5. Aalst, W.M.P. van der, Jablonski, S., 2000. Dealing with workflow change: identification of issues and solutions. International Journal of Computer Systems, Science, and Engineering, 15 (5), pp. 267-276.
  6. Aalst, W.M.P. van der, Dongen, B.F. van, Herbst, J., Maruster, L., Schimm, G., and Weijters, A.J.J.M., 2003. Workflow mining: a survey of issues and approaches. Data and Knowledge Engineering, 47 (2), pp. 237-267.
  7. Aalst, W.M.P. van der, Weske, M., Grünbauer, D., 2005. Case handling: a new paradigm for business process support. Data and Knowledge Engineering, 53 (2), pp. 129- 162.
  8. Adams, M., Hofstede, A.H.M. ter, Edmond, D., and Aalst, W.M.P. van der, 2005. Facilitating flexibility and dynamic exception handling in workflows. In: Belo, O., Eder, J., Pastor, O., and Falcao e Cunha, J., editors, Proceedings of the CAiSE'05 Forum, pp. 45-50, FEUP, Porto, Portugal.
  9. Agostini, A., De Michelis, G., 2000. Improving flexibility of workflow managment systems. In: Aalst, W.M.P. van der, Desel, J., and Oberweis, A., editors, Business Process Management: models, techniques and empirical studies, volume 1806 of Lecture Notes in Computer Science, pp. 218-234, Springer-Verlag, Berlin.
  10. Casati, F., Ceri, S., Pernici, B., and Pozzi, G., 1996. Workflow Evolution. In: Proceedings of ER 7896, pp. 438-455, Cottubus, Germany.
  11. Davenport, T.H., 1993. Process innovation: reengineering work through information technology. Harvard Business School Press, Boston.
  12. Dumas, M., Aalst, W.M.P. van der, Hofstede, A.H.M. ter, 2005. Process-aware information systems: bridging people and software through process technology. Wiley & Sons.
  13. Ellis, C.A., Keddara, K., 2000. A workflow change is a worklfow. In: Aalst, W.M.P. van der, Desel, J., and Oberweis, A., editors, Business Process Management: models, techniques and empirical studies, volume 1806 of Lecture Noted in Computer Science, pp. 201- 217, Springer-Verlag, Berlin.
  14. Guenther, C.W., Aalst, W.M.P. van der, 2006. Mining activity clusters from low-level event logs. BPM report, http://is.tm.tue.nl/staff/wvdaalst/BPMcenter/- reports.htm .
  15. GYATA BPi, 2006. GYATA BPi website. http://www.- gyatabpi.com, retrieved on November 15, 2006.
  16. Hammer, M., Champy, J., 1993. Reengineering the corporation. Nicolas Brealey Publishing, London.
  17. Herrmann, T., Hoffmann, M., Loser, K.U., and Moysich, K., 2000. Semistructured models are surprisingly useful for user-centered design. In: De Michelis, G., Giboin, A. Karsenty, L., and Dieng, R., editors, Designing Cooperative Systems (Coop 2000), pp. 159- 174, IOS Press, Amsterdam.
  18. Kaan, K., Reijers, H.A., and Molen, P. van der, 2006. Introducing case mangagement: opening workflow management's black box. In S. Dustdar, J.L. Fiadeiro, and A. Sheth, editors, Proceedings of the 4th International Conference Business Process Management (BPM 2006), volume 4102 of Lecture Notes in Computer Science, pp. 358-367, Springer Verlag, Berlin, 2006.
  19. Klein, M., Dellarocas, C., and Bernstein, A., editors, 1998. Proceedings of the CSCW-98 Workshop Towards Adaptive Workflow Systems, Seattle, Washington.
  20. Klein, M., Dellarocas, C., and Bernstein, A., editors, 2000. Adaptive Workflow Systems, volume 9 of Special issue of the journal of Computer Supported Cooperative Work.
  21. Orlicky, J.A., 1972. Structuring the bill of materials for MRP. Production and Inventory Management, pp. 19- 42.
  22. Pallas Athena, 2006. Pallas Athena website. http://www.pallas-athena.com, retrieved on November 15, 2006.
  23. Platier, E.A.H., 1996. A logistical view on business processes: BPR and WFM concepts (in Dutch). PhD thesis, Eindhoven University of Technology, Eindhoven, the Netherlands.
  24. Reichert, M., Dadam, P., 1998. ADEPTflex: supporting dynamic changes of workflow without loosing control. Journal of Intelligent Information Systems, 10 (2), pp. 93-129.
  25. Reijers, H.A., 2003. Design and control of workflow processes: business process managment for the service industry, volume 2617 of Lecture Notes in Computers Science, Springer-Verlag, Berlin.
  26. Reijers, H.A., Limam, S., and Aalst, W.M.P. van der, 2003. Product-based workflow design. Journal of Management Information Systems, 20 (1), pp. 229- 262.
  27. Reijers, H.A., Vanderfeesten, I.T.P., 2004. Cohesion and coupling metrics for workflow process design. In: Desel, J., Pernici, B., and Weske, M., editors, International Conference on Business Process management (BPM 2004), volume 3080 of Lecture Notes in Computer Science, pp. 290-305, SpringerVerlag, Berlin.
  28. Rinderle, S., Reichert, M., and Dadam, P., 2004. Correctness criteria for dynamic changes in workflow systems: a survey. Data and Knowledge Engineering, 50 (1), pp. 9-34.
  29. Staffware, 2003. Staffware Process Suite Version 2 - White Paper. Staffware PLC, Maidenhead, UK.
  30. Sun, S.X., Zhao, J.L., 2004. A data flow approach to workflow design. In: Proceedings of the 14th Workshop on Information Technology and Systems (WITS'04), pp. 80-85.
  31. Vanderfeesten, I., Aalst, W.M.P. van der, and Reijers, H.A., 2005. Modelling a product based workflow System in CPN Tools. In: Jensen, K., editor, Proceedings of the 6th workshop on the practical use of coloured Petri Nets and CPN Tools (CPN 2005), volume 576 of DAIMI, pp. 99-118, Aarhus, Denmark.
  32. Vanderfeesten, I., Reijers, H.A., and Aalst, W.M.P. van der, 2006. Product Based Workflow Design with Case Handling Systems. Beta Working Paper, no. 189, Technische Universiteit Eindhoven, Eindhoven. Available from http://www.tm.tue.nl/beta/ .
  33. Weske, M., 2001. Formal foundation and conceptual design of dynamic adaptations in a workflow management system. In: Sprague, R., editor, Proceedings of the thirty-fourth annual Hawaii International Conference on Systems Science (HICSS34). IEEE Computer Society Press, Los Alamitos, California.
Download


Paper Citation


in Harvard Style

Vanderfeesten I., A. Reijers H. and M. P. van der Aalst W. (2007). AN EVALUATION OF CASE HANDLING SYSTEMS FOR PRODUCT BASED WORKFLOW DESIGN . In Proceedings of the Ninth International Conference on Enterprise Information Systems - Volume 3: ICEIS, ISBN 978-972-8865-90-0, pages 39-46. DOI: 10.5220/0002356600390046


in Bibtex Style

@conference{iceis07,
author={Irene Vanderfeesten and Hajo A. Reijers and Wil M. P. van der Aalst},
title={AN EVALUATION OF CASE HANDLING SYSTEMS FOR PRODUCT BASED WORKFLOW DESIGN},
booktitle={Proceedings of the Ninth International Conference on Enterprise Information Systems - Volume 3: ICEIS,},
year={2007},
pages={39-46},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002356600390046},
isbn={978-972-8865-90-0},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Ninth International Conference on Enterprise Information Systems - Volume 3: ICEIS,
TI - AN EVALUATION OF CASE HANDLING SYSTEMS FOR PRODUCT BASED WORKFLOW DESIGN
SN - 978-972-8865-90-0
AU - Vanderfeesten I.
AU - A. Reijers H.
AU - M. P. van der Aalst W.
PY - 2007
SP - 39
EP - 46
DO - 10.5220/0002356600390046