A PROTOTYPE FOR ON-LINE MONITORING AND CONTROL OF ENERGY PERFORMANCE FOR RENEWABLE ENERGY BUILDINGS
Benjamin Paris, Julien Eynard, Gregory François, Thierry Talbert, Monique Polit
2008
Abstract
In this article, ways for improving the energetic performance of buildings are investigated. A state of the art leads to the introduction of a performance indicator expressed in kWh/m2/yr. To improve the value of this indicator, a processor-based prototype of a real-time data-acquisition and monitoring system is developed in collaboration with two industrial companies. The set of measurements and corresponding sensors that are necessary to compute the value of the indicator while being consistent with the natural segmentation of energy consumption, is listed, thanks to the representation of the building using a systemic approach. Control algorithms are tested in simulation to improve renewable energy consumption while reducing fossil energy dependence, which are deemed to be applicable in practice using the proposed electronics. Simulations concerning the control and optimization of the power applied to two warmers in a room show large potential for fossil energy consumption reduction.
References
- ADEME (Agence Départementale de l'Environnement et de la Maîtrise de l'Energie), 2007. Les chiffres clés du bâtiment en 2006, Publications de l'ADEME.
- Boyde, G., Dutrow, E., Tunnessen, W., 2007. The evolution of the ENERGY STAR® energy performance indicator for benchmarking industrial plant manufacturing energy use, J Clean Prod (2007), doi: 10.1016/j.jclepro., 2007.02.024.
- Duffaure-Gallais, I., 2006. La nouvelle réglementation thermique arrive. Le Moniteur, pages: 16-17.
- García, C.E., Prett, D.M., Morari M., 1989: Model predictive control: Theory and practice - A survey, Automatica, Vol. 25, n°3, Pages 335-348.
- Gungor, M.B., Kyriacou, P.A., Jones, D.P., 1997. A new micro-controller based wear-time monitor for use with removable orthodontic appliances. In Proceedings of the 19th Engineering in Medicine and Biology society, Vol. 6, pages: 2419 - 2421.
- Hensen, J.L.M., 1991. On the thermal interaction of building structure and heating and ventilation system, Ph.D. Thesis Technische Univ., Eindhoven (Netherlands).
- Journal Officiel, 2006. Arrêté du 27 juillet 2006 relatif au contenu et aux conditions d'attribution du label HPE, République française.
- Kalagasidis, A.S., Taesler, R., Andersson C., Nord, M., 2006: Upgraded weather forecast control of building heating systems. In Proceedings of the 3rd International Building Physics Conference, Concordia University, Montreal, Canada, pages: 951-958.
- Kalogirou, S., Bojic, M., 2000. Artificial neural networks for prediction of the energy consumption of a passive solar building, Energy, Vol. 25, n°5, Pages 479-491.
- Kalogirou, S., Lalot, S., Florides, G., Desmet, B., 2007. Development of neural network-based fault diagnostic system for solar thermal applications, Sol. Energy, doi: 10.1016/j.solener.2007.06.010.
- Leong, S.S., Vun, C.H., 1998, Design and implementation of an authentication protocol for home automation systems, IEEE Transactions on Consumer Electronics, Vol. 44, n°3, pages: 911-921.
- Lygouras, J.N., Botsaris, P.N., Vourvoulakis, J., Kodogiannis, V., 2006. Fuzzy logic controller implementation for a solar air-conditioning system, Ap. Energy, doi: 10.1016/j.apenergy.2006.10.002.
- Maïzi, N., Assoumou, E., 2007. Modélisation prospective et spécificités de la politique énergétique française, Journal sur l'enseignement des sciences et technologies de l'information et des systèmes, vol. 6, doi :10.1051/J3EA :2007002.
- Mendoça, P., Bragança, L., 2003. Energy optimization through thermal zoning the outer skin, In Proceedings of the Healthy Buildings 7th International Conference, School of Design and Environment, National Univ. of Singapore.
- Mendoça, P., Bragança, L., 2007. Sustainable housing with mixedweight strategy - A case of study. Building and Environment, doi: 10.1016/j.buildenv., 2006.08.025.
- Nougier, J.P., 1993. Méthodes de calculs numériques, Masson.
- Sacadura, J.F., 1993. Initiation aux transferts thermiques, Edition Technique et Documentation.
- Segars, S., 1998. The ARM9 family-high performance microprocessors for embedded applications, In Proceedings of the International Conference on Computer Design: VLSI in Computers and Processors, pages: 230-235.
- Sesolis, B, 2006. Amélioration de la performance énergétique : Une nouvelle réglementation pour tous les bâtiments neufs, la RT 2005, JMG.
- Xingwu, C., Xinhua, J., Lei, W., 2006. Development on ARM9 System-on-chip Embedded Sensor Node for Urban Intelligent Transportation System. In Proceedings of the International Symposium on Industrial Electronics, IEEE, Vol. 4, Pages: 3270-3275.
Paper Citation
in Harvard Style
Paris B., Eynard J., François G., Talbert T. and Polit M. (2008). A PROTOTYPE FOR ON-LINE MONITORING AND CONTROL OF ENERGY PERFORMANCE FOR RENEWABLE ENERGY BUILDINGS . In Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO, ISBN 978-989-8111-32-6, pages 125-130. DOI: 10.5220/0001487201250130
in Bibtex Style
@conference{icinco08,
author={Benjamin Paris and Julien Eynard and Gregory François and Thierry Talbert and Monique Polit},
title={A PROTOTYPE FOR ON-LINE MONITORING AND CONTROL OF ENERGY PERFORMANCE FOR RENEWABLE ENERGY BUILDINGS},
booktitle={Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,},
year={2008},
pages={125-130},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0001487201250130},
isbn={978-989-8111-32-6},
}
in EndNote Style
TY - CONF
JO - Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,
TI - A PROTOTYPE FOR ON-LINE MONITORING AND CONTROL OF ENERGY PERFORMANCE FOR RENEWABLE ENERGY BUILDINGS
SN - 978-989-8111-32-6
AU - Paris B.
AU - Eynard J.
AU - François G.
AU - Talbert T.
AU - Polit M.
PY - 2008
SP - 125
EP - 130
DO - 10.5220/0001487201250130