REAL-TIME CONTROL OF REWINDING MACHINE - Comparison of Two Approaches

Karel Perutka

2010

Abstract

The paper deals with two simple approaches applied to the real-time control of rewinding machine and their comparison. In brief, the comparison of results obtained by nonlinear real-time control with pre-identification, and by adaptive real-time control with on-line identification was performed. The rewinding machine was controlled by PC from MATLAB’s Real-Time Toolbox using technological card, terminal board and wires. Each of two used approaches has its advantages and its drawbacks, which was proven, and nonlinear control seemed to be more suitable for the rewinding machine, minimally because of the action signal history from the nonlinear control, the action is more consistent.

References

  1. Balachandran, R., Chidambaram, M., 1997. Decentralized control of crude unit distillation towers. In Computers and Chemical Engineering, 21, pp. 783-786.
  2. Bobal, V., Böhm, J., Fessl, J., Machacek, J., 2005. Digital Self-tuning Controllers. Springer-Verlag London Limited.
  3. Casavola, A., Grimble, M. J., Mosca, E., Nistri, P., 1991. Continuous-time LQ regulator design by polynomial equations. In Automatica, 27, pp. 555-558.
  4. Chen, Ch.-T.; Chuang, Y.-Ch., Hwang, Ch., 2006. A Simple Nonlinear Control Strategy for Chemical Processes. In Proc. of the 6th Asian Control Conference, Inna Grand Bali Beach Hotel, Bali, Indonesia, ISBN 979-15017-0.
  5. Cottenceau, B., Hardouin, L., Boimond, J.-L., Ferrier, J.- L., 2001. Model reference control for time event graphs in diods. In Automatica, 37, pp. 1451-1458.
  6. Cui, H., Jacobsen, E.W., 2002. Performance limitations in decentralized control. In Journal of Process Control, 12, pp. 485-494.
  7. Dostal, P., 1997. An approach to control of processes of chemical technology. Inaugural dissertation. TU Brno, Brno.
  8. Li, H., Lee, P. L., Bahri, P., Cameron, I.T., 2000. Decentralized control design for nonlinear plants: ?- metric approach. In Computers and Chemical Engineering, 24, pp. 273-278.
  9. Lin, C.-F., 1994. Advanced Control System Design. New Jersey, USA: Prentice Hall, 1994. ISBN 0-13-006305- 3.
  10. Modrlak, O.: Theory of automatic control II: Nonlinear systems. Lectures notes. [on line] Technical University of Liberec, [cit. 02-02-2010], available at http://www.fm.vslib.cz/krtsub/fm/modrlak/pdf/tar2_n el.pdf.
  11. Perutka, K., Dolezel, K., 2009. Simulation Model of CE108 Coupled Drives Apparatus. In MATHMOD 2009, 6th Vienna Conference on Mathematical Modelling, Vienna, Austria. ARGESIM.
  12. Perutka, K., Dostalek, P., 2009. Simple Decentralized Autonomous Adaptive Nonlinear Real-time Controller with Controller Source Code Optimization: Case Study. In ISADS 2009, 9th IEEE International Symposium on Autonomous Decentralized Systems, Athens, Greece. IEEE.
  13. Perutka, K., Heczko, K., 2007. Teaching of MATLAB Programming Using Complex Game. In FIE2007, 37th IEEE/ASEE Frontiers in Education Conference, Milwaukee, WI, USA. IEEE.
  14. Real-time Toolbox: Introduction. [on line] Humusoft, [cit. 03-30-2010], available at http://www.humusoft.cz/ produkty/rtt/.
  15. Seatzu, C., Usai, G., 2002. A decentralized volume variations observer for open channels. In Applied Mathematical Modelling, 26, pp. 975-1001.
  16. Zhu, Y., Backx, T., 1993. Identification of Multivariable Industrial Processes for Simulation, Diagnosis and Control. Springer-Verlag Ltd., London, United Kingdom
Download


Paper Citation


in Harvard Style

Perutka K. (2010). REAL-TIME CONTROL OF REWINDING MACHINE - Comparison of Two Approaches . In Proceedings of the 7th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO, ISBN 978-989-8425-02-7, pages 197-200. DOI: 10.5220/0002949501970200


in Bibtex Style

@conference{icinco10,
author={Karel Perutka},
title={REAL-TIME CONTROL OF REWINDING MACHINE - Comparison of Two Approaches},
booktitle={Proceedings of the 7th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,},
year={2010},
pages={197-200},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002949501970200},
isbn={978-989-8425-02-7},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 7th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,
TI - REAL-TIME CONTROL OF REWINDING MACHINE - Comparison of Two Approaches
SN - 978-989-8425-02-7
AU - Perutka K.
PY - 2010
SP - 197
EP - 200
DO - 10.5220/0002949501970200