DEVELOPMENT OF VERTEBRAL METRICS - An Instrument to Study the Vertebral Column

António Jordão, Pedro Duque, Claudia Quaresma, Pedro Vieira

2011

Abstract

The purpose of this article is to present a new instrument to study the vertebral column. This device is an evolution from Vertebral Metrics (Quaresma, 2010). In this new device, the detection of the spinous process is semi-automatic, non-invasive and it is prepared to analyse the entire population. The data acquired from the instrument will allow three dimensional analysis of the vertebral column in standing position. With this instrument, hospital staff will be able to study biomechanical changes in the vertebral column due to incorrect exercise, injury, congenital malformations, obesity, pregnancies, etc. The device uses a system of movement in two axes that is controlled by software. The software uses a video camera and image processing algorithm to detect points that were previously marked in the spinous process of the individual under study. The software gives orders to the mechanic part to move the equipment to position the mark made by laser upon the spinous process. In these conditions, the spatial coordinates of the spinous process are stored and the process is repeated for the others spinous processes. A complete examination takes approximately 2 minutes and 25 seconds after manual tracing of the spine and improving is being made to the software to reach the 30 seconds mark. This instrument has the possibility of performing consecutive sweeps, for dynamic accommodation studies.

References

  1. Gonzalez, R; Woods, R.; (2002); Processing; (2th ed.) Prentice Hall.
  2. Gonzalez, R.; Woods, R.; Eddins, S.; (2004); Digital Image Processing using Matlab; Prentice-Hall.
  3. Hecht, E.; (2002); Óptica; (2th ed.) Fundação Calouste Gulbenkian
  4. Muljowidodo K.; Mochammad A. Rasyid; SaptoAdi N & Agus Budiyono; (2009); Vision based distance measurement system using laser pointer design for underwater vehicle; Indian Journal of Marine Sciences Vol. 38(3), pp. 324-331
  5. Quaresma, C.; Secca M.; O'Neill J.; Branco J.; (2010); Vertebral Metrics: Aplication of a Mechanical Instrument to Evaluate the Spinal Column in Pregnant Women; International Conference: Biodevice
  6. Quaresma, C.; Secca M.; O'Neill J.; Branco J.; (2009a); Development of a Mechanical Instrument to Evaluate Biomechanically the Spinal Column in Pregnant Women; International Conference: Biodevice, 310- 113.
  7. Quaresma, C.; João, F.; Fonseca, M.; Secca, M.; Veloso, A.; O'Neill, J.; Branco, J.; (2009b); Validation of Vertebral Metrics: a mechanical instrument to evaluate posture of the spinal column; O. Dössel and W.C. Schlegel (Eds): WC IFMBE Proceedings 25/VII, 711-713.
  8. Quaresma, C.; Secca, M.; O'Neill, J.; Branco, J.; (2009c); Métrica Vertebral: Instrumento de Avaliação Biomecânica da Coluna Vertebral; III Congresso Nacional de Biomecânica.
  9. Secca, M.; Quaresma, C; Santos, F.; (2008); A Mechanical Instrument to Evaluate Posture of the Spinal Column in Pregnant Women. In IFMBE Proceedings 4th European Conference of the International Federation for Medical and Biological Engineering. 23-27
  10. Vismara L.; Menegoni F.; Zaina F.; Galli M.; Negrini; Capodaglio S.; (2010); Effect of obesity and low back pain on spinal mobility: a cross sectional study in women; Vismera et al. Journal of NeuroEngineering and Rehabilitation 7:3.
Download


Paper Citation


in Harvard Style

Jordão A., Duque P., Quaresma C. and Vieira P. (2011). DEVELOPMENT OF VERTEBRAL METRICS - An Instrument to Study the Vertebral Column . In Proceedings of the International Conference on Biomedical Electronics and Devices - Volume 1: BIODEVICES, (BIOSTEC 2011) ISBN 978-989-8425-37-9, pages 224-229. DOI: 10.5220/0003164802240229


in Bibtex Style

@conference{biodevices11,
author={António Jordão and Pedro Duque and Claudia Quaresma and Pedro Vieira},
title={DEVELOPMENT OF VERTEBRAL METRICS - An Instrument to Study the Vertebral Column},
booktitle={Proceedings of the International Conference on Biomedical Electronics and Devices - Volume 1: BIODEVICES, (BIOSTEC 2011)},
year={2011},
pages={224-229},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0003164802240229},
isbn={978-989-8425-37-9},
}


in EndNote Style

TY - CONF
JO - Proceedings of the International Conference on Biomedical Electronics and Devices - Volume 1: BIODEVICES, (BIOSTEC 2011)
TI - DEVELOPMENT OF VERTEBRAL METRICS - An Instrument to Study the Vertebral Column
SN - 978-989-8425-37-9
AU - Jordão A.
AU - Duque P.
AU - Quaresma C.
AU - Vieira P.
PY - 2011
SP - 224
EP - 229
DO - 10.5220/0003164802240229