HYDRAULIC BALANCE IN SMART HOMES - Using The KNX-standard for Performing Balanced Heating Conditions in Dynamic Load Situations

Danny Szendrei, Tobias Teich, Susan Franke, Markus Schrader

2011

Abstract

Efficient and clean energy consumption is not only an essential request towards industrial economics. This request also refers towards the residential building sector. There, the major share of energy consumption is caused by house and facility heating. In Germany, most heating systems consist of double-pipe, hot water systems. Due to the lack of hydraulically balanced system conditions, a potential of up to 15% energy savings can be assumed. This paper addresses the use of KNX-technology (Smart Buildings) in residential buildings to ensure a dynamic adaption of hydraulic systems performance, in order to increase the heating systems efficiency. Therefor, a procedure of heating system segmentation into hydraulically independent units (meshes) is presented. This structure enables permanent control of adressable, net-based heating valve drivers in order to achieve balanced mass flow distribution over the whole facility. The dynamic hydraulic balance is achieved by positioning these valves according to heating loads, that are generated from the temperature settings in the corresponding rooms. The energetic advantages of single room heating control procedures, based on the application FacilityManager, is presented.

References

  1. Felsmann, C. and Hirschberg, R. (2007). Das Rohrnetz in Heizungsanlagen: eine Analyse des Teillastverhaltens und der Effizienz von Rohrnetzen. VDI-Verlag, Duesseldorf.
  2. German Department Of Justice (2009). Verordnung ueber energiesparenden Waermeschutz und energiesparende Anlagentechnik bei Gebaeuden (Energieeinsparverordnung - EnEV. Federal Republic of Germany, Berlin.
  3. GIRA (2006). Instabus EIB System, Tastsensor 2plus 2- /5fach mit Beschriftungsfeld. GIRA Giersiepen GmbH & Co. KG, Radevormwald.
  4. Guzek, G. (2010). Zur Energieeinsparung in Heizungsanlagen durch den hydraulischen Abgleich. TUDpress, Dresden.
  5. N. Fumo, J. P. and Chamra, L. (2009). Energy and economic evaluation of cooling, heating and power systems based on primary energy. in: Applied Thermal Engineering, vol. 29, pp. 2665-2671.
  6. R.Yao and Steemers, K. (2005). A method of formulating energy load profile for domestic buildings in the UK. in: Energy and Buildings, vol. 37, pp.663-671.
  7. Seifert, J. (2009). Ein Beitrag zur Einschtzung der energetischen und exergetischen Einsparpotentiale von Regelverfahren in der Heizungstechnik. TUDpress, Dresden.
  8. Szendrei, D. (2010). Hydraulischer Abgleich mittels elektromotorischer HKV-Antriebe fr dynamische Lastprofile. in: T.Teich and W. Igel: Energieeffizienz in Wohngebuden. guc Verlag, Chemnitz.
  9. T. Teich, M. Zimmermann, S. Franke, F. Janh and M. Schrader (2010). Intelligent Building Automation. in: ISRST International Conference on Automation, Robotics and Control Systems, Proceedings.
  10. Thron, U. (2001). Vorausschauende selbstadaptierende Heizungsregelung fueur Solarhaeuser. Universitt Hannover, FB Maschinenbau.
  11. Zou, Y. (2008). Unstetige Wrmeversorgung im Mehrfamilienhaus. Universittsverlag Karlsruhe.
Download


Paper Citation


in Harvard Style

Szendrei D., Teich T., Franke S. and Schrader M. (2011). HYDRAULIC BALANCE IN SMART HOMES - Using The KNX-standard for Performing Balanced Heating Conditions in Dynamic Load Situations . In Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO, ISBN 978-989-8425-75-1, pages 381-386. DOI: 10.5220/0003409003810386


in Bibtex Style

@conference{icinco11,
author={Danny Szendrei and Tobias Teich and Susan Franke and Markus Schrader},
title={HYDRAULIC BALANCE IN SMART HOMES - Using The KNX-standard for Performing Balanced Heating Conditions in Dynamic Load Situations},
booktitle={Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,},
year={2011},
pages={381-386},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0003409003810386},
isbn={978-989-8425-75-1},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,
TI - HYDRAULIC BALANCE IN SMART HOMES - Using The KNX-standard for Performing Balanced Heating Conditions in Dynamic Load Situations
SN - 978-989-8425-75-1
AU - Szendrei D.
AU - Teich T.
AU - Franke S.
AU - Schrader M.
PY - 2011
SP - 381
EP - 386
DO - 10.5220/0003409003810386