A COMPARATIVE STUDY OF DIFFERENT CHIP SEPARATION APPROACHES FOR NUMERICAL MODELING OF ORTHOGONAL CUTTING

Bo Hou, Yong-fu Wu, Shu-hui Li, Zhong-qin Lin, Zhong-qi Yu

2011

Abstract

Numerical cutting modelling gives access to thermo-mechanical field such as stress, strain and temperature that are difficult to obtain through experiments, thus provides a unique insight and helps to improve design quality and shorten design cycle. Chip separation is one of the most important issues in cutting simulation because of its significant influence on chip formation, stress and temperature predictions. Modelling of an orthogonal cutting process using ABAQUS/explicit is presented. Two kinds of chip separation approaches are compared, a partial damage zone (PDZ) and an Arbitrary-Lagrangian-Eulerian (ALE) based approach, with the aim to characterize the effect on chip formation, cutting force, temperature and residual stress. ALE and PDZ methods predict the similar cutting force and temperature results, and they also predict different chip formations and residual stress profiles. The predictions are analysed and possible reasons are discussed.

References

  1. Shet, C., Deng, X., 2003. 'Residual stress and strain in othogonal metal cutting', Int. J. Mach. Tool. Manu, vol. 43, pp. 573-583.
  2. Hortig, C., Svendsen, B., 2007. 'Simulation of chip formation during high-speed cutting', J. Mater. Process. Tech, vol. 186, pp. 66-76.
  3. Ng, E-G., El-Wardany, T-I., Dumitrescua, M., and Elbestawia, M. A., 2002. 'physics-based simulation of high speed machining', Mach. Sci. Technol, vol. 6, no. 3, pp. 301-329.
  4. Mabrouki, T., Girardin, F., Asad, M., and Rigal, J-F., 2008. 'Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)78, Int. J. Mach. Tool. Manu, vol. 48, pp. 1187-1197.
  5. Pantalé, O., Bacaria, J-L., Dalverny, O., Rakotomalala, R., and Caperaa, S., 2004. 782D and 3D numerical models of metal cutting with damage effects', Comput. Methods Appl. Mech. Engrg, vol. 193, pp.4383-4399.
  6. Anurag, S., Guo, Y.B., and Horstemeyer, M.F., 2009. 'The effect of materials testing modes on finite element simulation of hard machining via the use of internal state variable plasticity model coupled with experimental study', Comput. Struct, vol. 87, pp. 303- 317.
  7. Nasr, M.N.A., Ng, E-G., and Elbestawi, M.A., 2007. 'Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L', Int. J. Mach. Tool. Manu, vol. 47, pp.401-411.
  8. Movahhedy, M.R., Gadala, M.S., and Altintas, Y., 2000. 'Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian-Eulerian Finite element method', J. Mater. Process. Tech, vol. 103. pp.267- 275.
  9. Kim, K.W., Lee, W.Y., and Sin, H.C., 1999. 'A finiteelement analysis of machining with the tool edge considered', J. Mater. Process. Tech, vol. 86, pp.45-55.
  10. Strenkowski, J.S., Shih, A.J., and Lin, J-C., 2002. 'An analytical finite element model for predicting threedimensional tool forces and chip flow', Int. J. Mach. Tool. Manu, vol. 42, no. 6, pp.723-731.
  11. Nasr, M.N.A., Ng, E-G., and Elbestawi, M.A., 2008. 'A modified time-efficient FE approach for predicting machining-induced residual stresses', Finite. Elem. Anal. Des, vol. 44, pp.149-161.
  12. Lennon, A.M. and Ramesh, K.T., 1998. 'A technique for measuring the dynamic behaviour of materials at high temperatures', Int. J. Plasticity, vol. 14, pp.1279-1292.
  13. Sartkulvanich, P., Koppka, F., and Altan, T., 2004. 'Determination of flow stress for metal cutting simulation-a progress report', J. Mater. Process. Tech, vol. 146, pp.61-71.
  14. Fu, X.L., 2007. 'Research on deformation theory and characteristics of machined surface for high-speed milling aviation aluminium alloy', Ph.D dissertation, Shandong university, JiNan.
Download


Paper Citation


in Harvard Style

Hou B., Wu Y., Li S., Lin Z. and Yu Z. (2011). A COMPARATIVE STUDY OF DIFFERENT CHIP SEPARATION APPROACHES FOR NUMERICAL MODELING OF ORTHOGONAL CUTTING . In Proceedings of 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SDDOM, (SIMULTECH 2011) ISBN 978-989-8425-78-2, pages 458-464. DOI: 10.5220/0003646004580464


in Bibtex Style

@conference{sddom11,
author={Bo Hou and Yong-fu Wu and Shu-hui Li and Zhong-qin Lin and Zhong-qi Yu},
title={A COMPARATIVE STUDY OF DIFFERENT CHIP SEPARATION APPROACHES FOR NUMERICAL MODELING OF ORTHOGONAL CUTTING},
booktitle={Proceedings of 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SDDOM, (SIMULTECH 2011)},
year={2011},
pages={458-464},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0003646004580464},
isbn={978-989-8425-78-2},
}


in EndNote Style

TY - CONF
JO - Proceedings of 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications - Volume 1: SDDOM, (SIMULTECH 2011)
TI - A COMPARATIVE STUDY OF DIFFERENT CHIP SEPARATION APPROACHES FOR NUMERICAL MODELING OF ORTHOGONAL CUTTING
SN - 978-989-8425-78-2
AU - Hou B.
AU - Wu Y.
AU - Li S.
AU - Lin Z.
AU - Yu Z.
PY - 2011
SP - 458
EP - 464
DO - 10.5220/0003646004580464