Model Predictive 2DOF PID Control for Slip Suppression of Electric Vehicles

Tohru Kawabe

2014

Abstract

This paper propose the design method of 2DOF (two degrees of freedom) PID (Proportional-Integral- Derivative) controller based on MPC (Model predictive control). This controller is called as MP-2DOF PID controller. The method repeatedly optimizes the control parameters for each control period by solving an optimization problem based on the MPC algorithm, while using the 2DOF PID controller structure. Generally 2DOF PID controller can be implemented by a simple extension of the pre-existing PID controller with feed-forward element. This means we can get better performance without much cost. The proposed method aims to improve the maneuverability, the stability and the low energy consumption of EVs (Electric Vehicles) by controlling the wheel slip ratio. There also include numerical simulation results to demonstrate the effectiveness of the method.

References

  1. Araki, M. and Taguchi, T. (2003). Two-degree-of freedom pid controllers. International Journal of Control, Automation, and Systems, 1(4):401-411.
  2. Astrom, K. and Hagglund, T. (2005). Advanced PID Control. The Instrumentation, Systems, and Automation Society.
  3. Besancon-Voda, A. (1998). Iterative auto-calibration of digital controllers. methodology and applications. Control Engineering Practice, 6(3):345-358.
  4. Brown, S., Pyke, D., and Steenhof, P. (2010). Electric vehicles: The role and importance of standards in an emerging market. Energy Policy, 38(7):3797-3806.
  5. Camacho, E. and Bordons, C. (2004). Model Predictive Control: Advanced Textbooks in Control and Signal Processing. Springer-Verlag.
  6. Fujii, K. and Fujimoto, H. (2007). Slip ratio control based on wheel control without detection of vehiclespeed for electric vehicle. IEEJ Technical Meeting Record, VT07-05:27-32.
  7. Ginter, V. and Pieper, J. (2011). Robust gain scheduled control of a hydrokinetic turbine. IEEE Transactions on Control Systems Technology, 19(4):805-817.
  8. Hirota, T., Ueda, M., and Futami, T. (2011). Activities of electric vehicles and prospect for future mobility. Journal of The Society of Instrument and Control Engineering, 50:165-170.
  9. Hori, Y. (2000). Simulation of mfc-based adhesion control of 4wd electric vehicle. IEEJ Record of Industrial Measurement and Control, pages IIC-00-12.
  10. Jin, Q. and Liu, Q. (2014). Imc-pid design based on model matching approach and closed-loop shaping. ISA Transactions, 53(2):462-473.
  11. Kawabe, T., Kogure, Y., Nakamura, K., Morikawa, K., and Arikawa, K. (2011). Traction control of electric vehicle by model predictive pid controller. Transaction of JSME Series C, 77(781):3375-3385.
  12. Kin, K., Yano, O., and Urabe, H. (2001). Enhancements in vehicle stability and steerability with vsa. Proceedings of JSME TRANSLOG 2001, pages 407-410.
  13. Li, S., Nakamura, K., Kawabe, T., and Morikawa, K. (2012). A sliding mode control for slip ratio of electric vehicle. Proceedings of SICE Annual Conference 2012, pages 1974-1979.
  14. Maciejowski, J. (2005). Predictive Control with Constraints. Tokyo Denki University Press (Trans. by Adachi,S. and Kanno,M.) (in Japanese).
  15. Mousazadeh, H., Keyhani, A., Mobli, H., Bardi, U., Lombardi, G., and Asmar, T. (2009). Environmental assessment of ramses multipurpose electric vehicle compared to a conventional combustion engine vehicle. Journal of Cleaner Production, 17(9):781-790.
  16. Pacejka, H. and Bakker, E. (1991). The magic formula tire model. Vehicle system dynamics, 21:1-18.
  17. Precup, R. and Preitl, S. (2006). Pi and pid controllers tuning for integral-type servo systems to ensure robust stability and controller robustness. Electrical Engineering, 88(2):149-156.
  18. Sawase, K., Ushiroda, Y., and Miura, T. (2006). Left-right torque vectoring technology as the core of super all wheel control (s-awc). Mitsubishi Motors Technical Review, 18:18-24.
  19. Zanten, A., Erhardt, R., and Pfaff, G. (1995). Vdc; the vehicle dynamics control system of bosch. Proceedings of Society of Automotive Engineers International Congress and Exposition 1995, page Paper No. 950759.
Download


Paper Citation


in Harvard Style

Kawabe T. (2014). Model Predictive 2DOF PID Control for Slip Suppression of Electric Vehicles . In Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO, ISBN 978-989-758-040-6, pages 12-19. DOI: 10.5220/0004996700120019


in Bibtex Style

@conference{icinco14,
author={Tohru Kawabe},
title={Model Predictive 2DOF PID Control for Slip Suppression of Electric Vehicles},
booktitle={Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,},
year={2014},
pages={12-19},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0004996700120019},
isbn={978-989-758-040-6},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,
TI - Model Predictive 2DOF PID Control for Slip Suppression of Electric Vehicles
SN - 978-989-758-040-6
AU - Kawabe T.
PY - 2014
SP - 12
EP - 19
DO - 10.5220/0004996700120019