Enhanced Physical Interaction Performance for Compliant Joint Manipulators using Proxy-based Sliding Mode Control
Navvab Kashiri, Nikos G. Tsagarakis, Michael Van Damme, Bram Vanderborght, Darwin G. Caldwell
2014
Abstract
The use of typical position controllers for robots working around humans can involve some risks when unintended physical human-robot interactions occur. In order to benefit from a proper tracking performance during normal operations, and a smooth and damped recovery from position errors due to contacts with external objects/agents, Proxy-based Sliding Mode Control was proposed. While the efficacy of this controller in fully actuated manipulators was discussed, the employment of this controller in underactuated systems has not been studied so far. This paper introduces a control scheme to implement this controller in a class of underactuated systems. Specifically, the control of flexible joint manipulators possessing passive elastic elements in series with motors is studied. The formulation of Proxy-based Sliding Mode Control is adopted according to the stability requirements of this type of dynamic systems, and a torque controller required for the regulation of the the output torque of actuation units is designed using the Feedback Linearization and the Linear Quadratic optimal control approach. The performance of the proposed scheme is demonstrated in dynamic simulation of an anthropomorphic compliant arm.
References
- Albu-Schäffer, A., Petit, F., and Ott, C. (2012). Energy Shaping Control for a Class of Underactuated Euler-Lagrange Systems. In Petrovic, I. and Korondi, P., editors, 10th IFAC Symposium on Robot Control, Dubrovnik, Croatia.
- Aström, K. J. and Murray, R. M. (2010). Feedback systems: an introduction for scientists and engineers. Princeton university press.
- Ben-Israel, A. (1966). A Newton-Raphson method for the solution of systems of equations. Journal of Mathematical analysis and applications, 15(2):243-252.
- Beyl, P., Van Damme, M., Van Ham, R., Vanderborght, B., and Lefeber, D. (2009). Design and control of a lower limb exoskeleton for robot-assisted gait training. Applied Bionics and Biomechanics, 6(2):229-243.
- Bicchi, A., Rizzini, S. L., and Tonietti, G. (2001). Compliant design for intrinsic safety: General issues and preliminary design. In Intelligent Robots and Systems, 2001. Proceedings. 2001 IEEE/RSJ International Conference on, volume 4, pages 1864-1869. IEEE.
- Braun, D. J., Petit, F., Huber, F., Haddadin, S., Van Der Smagt, P., Albu-Schaffer, A., and Vijayakumar, S. (2013). Robots driven by compliant actuators: Optimal control under actuation constraints. IEEE Transactions on Robotics, 29(5):1085-1101.
- Cannon, R. H. and Rosenthal, D. E. (1984). Experiments in control of flexible structures with noncolocated sensors and actuators. Journal of Guidance, Control, and Dynamics, 7(5):546-553.
- Catalano, M. G., Grioli, G., Garabini, M., Bonomo, F., Mancini, M., Tsagarakis, N., and Bicchi, A. (2011). VSA-CubeBot: A modular variable stiffness platform for multiple degrees of freedom robots. In Proceedings - IEEE International Conference on Robotics and Automation, pages 5090-5095.
- Chen, L., Garabini, M., Laffranchi, M., Kashiri, N., Tsagarakis, N. G., Bicchi, A., and Caldwell, D. G. (2013a). Optimal Control for Maximizing Velocity of the CompAct Compliant Actuator. In Robotics and Automation (ICRA), 2013 IEEE International Conference on, pages 516-522, Karlsruhe (Germany).
- Chen, L., Laffranchi, M., Lee, J., Kashiri, N., Tsagarakis, N. G., and Caldwell, D. G. (2013b). Link position control of a compliant actuator with unknown transmission friction torque. In Intelligent Robots and Systems (IROS), 2013 IEEE/RSJ International Conference on, pages 4058-4064. IEEE.
- De Luca, A., Siciliano, B., and Zollo, L. (2005). PD control with on-line gravity compensation for robots with elastic joints: Theory and experiments. Automatica, 41(10):1809-1819.
- Garcia, E., Arévalo, J. C., Mun˜oz, G., and Gonzalez-de Santos, P. (2011). Combining series elastic actuation and magneto-rheological damping for the control of agile locomotion. Robotics and Autonomous Systems, 59(10):827-839.
- Haddadin, S., Albu-Schäffer, A., and Hirzinger, G. (2009). Requirements for safe robots: Measurements, analysis and new insights. The International Journal of Robotics Research, 28(11-12):1507-1527.
- Kashiri, N., Laffranchi, M., Lee, J., Tsagarakis, N. G., Chen, L., and Caldwell, D. (2014a). Real-time damping estimation for variable impedance actuator. In Robotics and Automation (ICRA), 2014 IEEE International Conference on, pages 1072-1077. IEEE.
- Kashiri, N., Laffranchi, M., Tsagarakis, N. G., Margan, A., and Caldwell, D. G. (2014b). Physical Interaction Detection and Control of Compliant Manipulators Equipped with Friction Clutches. In Robotics and Automation (ICRA), 2014 IEEE International Conference on, pages 1066-1071. IEEE.
- Kashiri, N., Laffranchi, M., Tsagarakis, N. G., Sardellitti, I., and Caldwell, D. G. (2013a). Dynamic modeling and adaptable control of the CompAct arm. In Mechatronics (ICM), 2013 IEEE International Conference on, pages 477-482.
- Kashiri, N., Tsagarakis, N. G., Laffranchi, M., and Caldwell, D. G. (2013b). On the stiffness design of intrinsic compliant manipulators. In Advanced Intelligent Mechatronics (AIM), 2013 IEEE/ASME International Conference on, pages 1306-1311. IEEE.
- Kikuuwe, R. and Fujimoto, H. (2006). Proxy-based sliding mode control for accurate and safe position control. In Robotics and Automation, 2006. ICRA 2006. Proceedings 2006 IEEE International Conference on, pages 25-30. IEEE.
- Kikuuwe, R., Yasukouchi, S., Fujimoto, H., and Yamamoto, M. (2010). Proxy-based sliding mode control: a safer extension of PID position control. Robotics, IEEE Transactions on, 26(4):670-683.
- Laffranchi, M., Tsagarakis, N., and Caldwell, D. G. (2011). A compact compliant actuator (CompAct) with variable physical damping. In Robotics and Automation (ICRA), 2011 IEEE International Conference on, pages 4644-4650. IEEE.
- Lee, J., Laffranchi, M., Kashiri, N., Tsagarakis, N., and Caldwell, D. (2014). Model-Free Force Tracking Control of Piezoelectric Actuators: Application to Variable Damping Actuator. In Robotics and Automation, 2014. ICRA'14. IEEE International Conference on, pages 2283-2289.
- Mathijssen, G., Brackx, B., Van Damme, M., Lefeber, D., and Vanderborght, B. (2013). Series-Parallel Elastic Actuation (SPEA) with intermittent mechanism for reduced motor torque and increased efficiency. In Intelligent Robots and Systems (IROS), 2013 IEEE/RSJ International Conference on, pages 5841-5846. IEEE.
- Ortega, R. (1998). Passivity-based Control of Euler-Lagrange Systems: Mechanical, Electrical and Electromechanical Applications. Communications and Control Engineering. Springer.
- Ozgoli, S. and Taghirad, H. D. (2006). A survey on the control of flexible joint robots. Asian Journal of Control, 8(4):332-344.
- Paluska, D. and Herr, H. (2006). The effect of series elasticity on actuator power and work output: Implications for robotic and prosthetic joint design. Robotics and Autonomous Systems, 54(8):667-673.
- Prieto, P. J., Rubio, E., Hernández, L., and Urquijo, O. (2013). Proxy-based sliding mode control on platform of 3 degree of freedom (3-DOF). Advanced Robotics, 27(10):773-784.
- Radulescu, A., Howard, M., Braun, D. J., and Vijayakumar, S. (2012). Exploiting variable physical damping in rapid movement tasks. In Advanced Intelligent Mechatronics (AIM), 2012 IEEE/ASME International Conference on, pages 141-148. IEEE.
- Tomei, P. (1991). A simple PD controller for robots with elastic joints. Automatic Control, IEEE Transactions on, 36(10):1208-1213.
- Tsagarakis, N. G., Laffranchi, M., Vanderborght, B., and Caldwell, D. G. (2009). A compact soft actuator unit for small scale human friendly robots. In Robotics and Automation, 2009. ICRA'09. IEEE International Conference on, pages 4356-4362. IEEE.
- Tsagarakis, N. G., Sardellitti, I., and Caldwell, D. G. (2011). A new variable stiffness actuator (CompAct-VSA): Design and modelling. In Intelligent Robots and Systems (IROS), 2011 IEEE/RSJ International Conference on, pages 378-383. IEEE.
- Van Damme, M., Vanderborght, B., Verrelst, B., Van Ham, R., Daerden, F., and Lefeber, D. (2009). Proxy-based sliding mode control of a planar pneumatic manipulator. The International Journal of Robotics Research, 28(2):266-284.
- Vanderborght, B., Albu-Schaeffer, A., Bicchi, A., Burdet, E., Caldwell, D. G., Carloni, R., Catalano, M., Eiberger, O., Friedl, W., Ganesh, G., Garabini, M., Grebenstein, M., Grioli, G., Haddadin, S., Hoppner, H., Jafari, A., Laffranchi, M., Lefeber, D., Petit, F., Stramigioli, S., Tsagarakis, N., Van Damme, M., Van Ham, R., Visser, L. C., and Wolf, S. (2013). Variable impedance actuators: A review. Robotics and Autonomous Systems, 61:1601-1614.
- Vanderborght, B., Tsagarakis, N. G., Van Ham, R., Thorson, I., and Caldwell, D. G. (2011). MACCEPA 2.0: Compliant actuator used for energy efficient hopping robot Chobino1D. Autonomous Robots, 31:55-65.
- Vertechy, R., Frisoli, A., Solazzi, M., Dettori, A., and Bergamasco, M. (2010). Linear-quadratic-Gaussian torque control: Application to a flexible joint of a rehabilitation exoskeleton. In Robotics and Automation (ICRA), 2010 IEEE International Conference on, pages 223-228. IEEE.
Paper Citation
in Harvard Style
Kashiri N., Tsagarakis N., Van Damme M., Vanderborght B. and Caldwell D. (2014). Enhanced Physical Interaction Performance for Compliant Joint Manipulators using Proxy-based Sliding Mode Control . In Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO, ISBN 978-989-758-040-6, pages 175-183. DOI: 10.5220/0005063201750183
in Bibtex Style
@conference{icinco14,
author={Navvab Kashiri and Nikos G. Tsagarakis and Michael Van Damme and Bram Vanderborght and Darwin G. Caldwell},
title={Enhanced Physical Interaction Performance for Compliant Joint Manipulators using Proxy-based Sliding Mode Control},
booktitle={Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,},
year={2014},
pages={175-183},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005063201750183},
isbn={978-989-758-040-6},
}
in EndNote Style
TY - CONF
JO - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,
TI - Enhanced Physical Interaction Performance for Compliant Joint Manipulators using Proxy-based Sliding Mode Control
SN - 978-989-758-040-6
AU - Kashiri N.
AU - Tsagarakis N.
AU - Van Damme M.
AU - Vanderborght B.
AU - Caldwell D.
PY - 2014
SP - 175
EP - 183
DO - 10.5220/0005063201750183