Applicability of Thermal Comfort Models to Car Cabin Environments

Diana Hintea, John Kemp, James Brusey, Elena Gaura, Neil Beloe

2014

Abstract

Car cabins are non-uniform and asymmetric environments in relation to both air velocity and temperature. Estimating and controlling vehicle occupant thermal comfort is therefore a challenging task. This paper focuses on evaluating the suitability of four existing thermal comfort models, namely the Predicted Mean Vote (PMV), Taniguchi’s model, Zhang’s model and Nilsson’s model in a variety of car cabin conditions. A series of comfort trials were performed ranging from controlled indoor trials to on-road driving trials. The outputs of all four models were compared to the sensation index reported by the subjects situated in the driver seat. The results show that PMV and Nilsson’s model are generally applicable for the car cabin environment, but that they are most accurate when there is a small air temperature rate of change (of under 1.5 ºC per minute), giving correlation levels of 0.91 and 0.93 for the two models respectively. Taniguchi’s and Zhang’s models were found unsuitable for all conditions, with correlation levels ranging between 0.03 and 0.60. Nilsson’s model is recommended by the authors based on the level of agreement with the subjective reports, its ability to estimate both local and overall thermal sensation and the smaller number of input parameters.

References

  1. Alahmer, A., Mayyas, A., Mayyas, A., Omar, M., and Shan, D. (2011). Vehicular thermal comfort models; a comprehensive review. Applied Thermal Engineering, 31:995-1002.
  2. Arens, E., Zhang, H., and Huizenga, C. (2006). Partial and whole-body thermal sensation and comfort, part ii: Non-uniform environmental conditio. Journal of Thermal Biology, 31:60-66.
  3. Bogdan, A. (2011). Case study assessment of local and general thermal comfort by means of local skin temperature. International Journal of Ventilation, 10:291- 300.
  4. Busl, M. (2011). Design of an energy-efficient climate control algorithm for electric cars. Master's thesis, Lund University.
  5. Cheng, Y., Niu, J., and Gao, N. (2012). Thermal comfort models: A review and numerical investigation. Building and Environment, 47:13-22.
  6. Cisternino, M. (1999). Thermal climate in cabs and measurement problems. In CABCLI Consortium.
  7. Fanger, P. (1970). Thermal Comfort. Danish Technical Press.
  8. Fanger, P. (1973). Assessment of man's thermal comfort in practice. British Journal of Industrial Medicine, 30:313-324.
  9. Farzaneh, Y. and Tootoonchi, A. (2008). Controlling automobile thermal comfort using optimized fuzzy controller. Applied Thermal Engineering, 28:1906-1917.
  10. ISO (2005). Ergonomics of the Thermal Environment.
  11. Luo, X., Hou, W., Li, Y., and Wang, Z. (2007). A fuzzy neural network model for predicting clothing thermal comfort. Computers and Mathematics with Applications, 53:1840-1846.
  12. Nakamura, M., Yoda, T., Crawshaw, L., Yasuhara, S., Saito, Y., Kasuga, M., Nagashima, K., and Kanosue, K. (2008). Regional differences in temperature sensation and thermal comfort in humans. Journal of Applied Physiology, 105:1897-1906.
  13. Nilsson, H. (2004). Comfort Climate Evaluation with Thermal Manikin Methods and Computer Simulation Models. PhD thesis, Royal Institute of Technology.
  14. Nilsson, H. and Holmer, I. (2002). Definitions and measurements of equivalent temperature. Technical report, The Climate Group, National Institute for Working Life, Solna, Sweden.
  15. Orosa, J. (2009). Research on general thermal comfort models. European Journal of Scientific Research, 2:217- 227.
  16. Taniguchi, Y., Hiroshi, A., and Kenji, F. (1992). Study on car air conditioning system controlled by car occupants' skin temperatures - part 1: research on a method of quantitative evaluation of car occupants. Technical report, SAE Paper.
  17. Ueda, M. and Taniguchi, Y. (2000). The prediction of the passenger's thermal sensation level using a neural network and its application to the automobile hvac control.
  18. van Hoof, J. (2008). Forty years of fanger's model of thermal comfort:l comfort for all? Indoor Air Journal, 18:182-201.
  19. Wang, D., Zhang, H., Arens, E., and Huizenga, C. (2007). Observations of upper-extremity skin temperature and corresponding overall-body thermal sensations and comfort. Building and Environment, 42:3933-3943.
  20. Zhang, H. (2003). Human Thermal Sensation and Comfort in Transient and Non-Uniform Thermal Environments. PhD thesis, University of California, Berkeley.
Download


Paper Citation


in Harvard Style

Hintea D., Kemp J., Brusey J., Gaura E. and Beloe N. (2014). Applicability of Thermal Comfort Models to Car Cabin Environments . In Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO, ISBN 978-989-758-039-0, pages 769-776. DOI: 10.5220/0005101707690776


in Bibtex Style

@conference{icinco14,
author={Diana Hintea and John Kemp and James Brusey and Elena Gaura and Neil Beloe},
title={Applicability of Thermal Comfort Models to Car Cabin Environments},
booktitle={Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},
year={2014},
pages={769-776},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005101707690776},
isbn={978-989-758-039-0},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,
TI - Applicability of Thermal Comfort Models to Car Cabin Environments
SN - 978-989-758-039-0
AU - Hintea D.
AU - Kemp J.
AU - Brusey J.
AU - Gaura E.
AU - Beloe N.
PY - 2014
SP - 769
EP - 776
DO - 10.5220/0005101707690776