Identification of Corrosive Substances through Electrochemical Noise using Wavelet and Recurrence Quantification Analysis

Lorraine Marques Alves, Romulo A. Cotta, Adilson Ribeiro Prado, Patrick Marques Ciarelli

2017

Abstract

There are many types of corrosive substances that are used in industrial processes or that are the result of chemical reactions and, over time or due to process failures, these substances can damage, through corrosion, machines, structures and a lot of equipment. As consequence, this can cause financial losses and accidents. Such consequences can be reduced considerably with the use of methods of identification of corrosive substances, which can provide useful information to maintenance planning and accident prevention. In this paper, we analyze two methods using electrochemical noise signal to identify corrosive substances that is acting on the metal surface and causing corrosion. The first method is based on Wavelet Transform, and the second one is based on Recurrence Quantification Analysis. Both methods were applied on a data set with six types of substances, and experimental results shown that both methods achieved, for some classification techniques, an average accuracy above 90%. The obtained results indicate the both methods are promising.

References

  1. Aballe, A., Bethencourt, M., Botana, F., and Marcos, M. (1999). Using wavelets transform in the analysis of electrochemical noise data. Electrochimica Acta, 44(26):4805-4816.
  2. Al-Mazeedi, H. and Cottis, R. (2004). A practical evaluation of electrochemical noise parameters as indicators of corrosion type. Electrochimica Acta, 49(17- 18):2787-2793.
  3. Allegri, T. (2012). Handling and Management of Hazardous Materials and Waste. Springer Science & Business Media.
  4. Bergelson, V. (2000). The multifarious poincaré recurrence theorem. Descriptive set theory and dynamical systems, 1:31-57.
  5. Bertocci, U., Gabrielli, C., Huet, F., and Keddan, M. (1997). Noise resistance applied to corrosion measurements. Electrochemical Society Journal, 144:31-37.
  6. Cottis, R. A., Homborg, A., and Mol, J. (2015). The relationship between spectral and wavelet techniques for noise analysis. Electrochimica Acta, pages 277-287.
  7. Duda, R., Hart, D. G., and Stork, P. (2000). Pattern Recognition. Wiley Interscience, New York, 1nd edition.
  8. Dutra, L. (1999). Feature extraction and selection for ers1/2 insar classification. International Journal of Remote Sensing, pages 993-1016.
  9. Fofano, S. and Jambo, H. (2007). Corrosion: fundamentals, monitoration and control. Ciencia Moderna, Brazil, 1nd edition.
  10. Garcia-Ochoa, E. and Corvo, F. (2015). Using recurrence plot to study the dynamics of reinforcement steel corrosion. Protection of Metals and Physical Chemistry of Surfaces, 51(4):716-724.
  11. Hou, Y., Aldrich, C., Lepkova, K., Suarez, L., and Kinsella, B. (2016). Monitoring of carbon steel corrosion by use of electrochemical noise and recurrence quantification analysis. Corrosion Science, pages 63-72.
  12. Javaherdashti, R., Nwaoha, C., and Tan, H. (2013). Corrosion and Materials in the Oil and Gas Industries. CRC Press.
  13. Jian, L., Weikang, K., Jiangbo, S., Ke, W., Weikui, W., Z.Weipu, and Zhoumo, Z. (2013). Determination of corrosion types from electrochemical noise by artificial neural networks. international Journal of Electrochemical Science, 8:2365-2377.
  14. Koch, G., Varney, J., Thompson, N., Moghissi, O., Gould, M., and Payer, J. (2016). International measures of prevention, application and economics of corrosion technologies study (impact). Technical report.
  15. Marquardt, D. W. (1963). An algorithm for least-squares estimation of nonlinear parameters. Journal of the Society for Industrial and Applied Mathematics, 11(2):431-441.
  16. Marwan, N., Romano, M., Thiel, M., and Kurths, J. (2007). Recurrence plots for the analysis of complex systems. Physics reports, 438:237-329.
  17. Masters, T. (1995). Advanced algorithms for Neural Networks: A C++ Sourcebook. John Wiley and Sonsl, New York, 1nd edition.
  18. Montalban, L., Henttu, P., and Piche, R. (2007). Recurrence quantification analysis of electrochemical noise data during pit development. International Journal of Bifurcation and Chaos, 17:3725-3728.
  19. Moshrefi, R., Mahjani, M., and Jafarian, M. (2014). Application of wavelet entropy in analysis of electrochemical noise for corrosion type identification. Electrochemistry Communications, 48:49-51.
  20. Quinlan, J. (1988). Decision trees and multivalued attributes. Oxford University Press, New York, 11nd edition.
  21. Theodoridis, S. and Koutroumbas, K. (2008). Pattern Recognition. Elsevier, San Diego, 4nd edition.
Download


Paper Citation


in Harvard Style

Marques Alves L., A. Cotta R., Ribeiro Prado A. and Marques Ciarelli P. (2017). Identification of Corrosive Substances through Electrochemical Noise using Wavelet and Recurrence Quantification Analysis . In Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM, ISBN 978-989-758-222-6, pages 718-723. DOI: 10.5220/0006252007180723


in Bibtex Style

@conference{icpram17,
author={Lorraine Marques Alves and Romulo A. Cotta and Adilson Ribeiro Prado and Patrick Marques Ciarelli},
title={Identification of Corrosive Substances through Electrochemical Noise using Wavelet and Recurrence Quantification Analysis},
booktitle={Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM,},
year={2017},
pages={718-723},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0006252007180723},
isbn={978-989-758-222-6},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM,
TI - Identification of Corrosive Substances through Electrochemical Noise using Wavelet and Recurrence Quantification Analysis
SN - 978-989-758-222-6
AU - Marques Alves L.
AU - A. Cotta R.
AU - Ribeiro Prado A.
AU - Marques Ciarelli P.
PY - 2017
SP - 718
EP - 723
DO - 10.5220/0006252007180723